Vibration of Cracked Composite Beams: a Dynamic Finite Element
the author of the article can submit here a request for assignment of a DOI number to this resource!
Cost of the service: euros 10,00 (for a DOI)
A Dynamic Finite Element (DFE) is developed to analyze the vibration characteristics of cracked composite beams. Stress intensity factors, corrected for geometry and material anisotropy, have been used to develop the local flexibility of a through-thickness cracked uniform laminated unidirectional unbalanced beam. By exploiting the principle of virtual work and the Dynamic Trigonometric Shape Functions (DTSF’s), developed from the exact solutions to the equations governing uncoupled flexural and torsional vibrations of the system, the element Dynamic Stiffness Matrix (DSM) is developed. By implementing the local flexibility of crack, the element matrices exhibiting both mass and stiffness properties are then assembled and the boundary conditions are applied to form the eigenproblem of the overall system. The natural frequencies and modes are then extracted using the well-known Wittrick–William (W-W) root counting algorithm. Numerical tests are conducted for a flat, solid rectangular cross-section, uniform, cantilever, laminated composite beam. Both intact and damaged scenarios (for cracks located at 20% and 50% of beam length), with various crack ratios, , and ply angles, , are investigated. Numerical results on natural frequencies and convergence tests demonstrate the higher accuracy and faster convergence of the proposed DFE and its superiority over the classical Finite Element Methods (FEM).
Copyright © 2013 Praise Worthy Prize - All rights reserved.
W. M. Ostachowicz, M. Krawczuk and M.P. Cartmell, Genetic algorithms in health monitoring of structures. Proceedings of the International Conference on Structural Control and Health Monitoring, SMART 2001, Warsaw (2001).
K. Wang, Vibration Analysis of Cracked Composite Bending-torsion Beams for Damage Diagnosis, PhD Dissertation, Dept. Mech. Eng., Virginia Tech., Blacksburg, VA, 2004; http://scholar.lib.vt.edu/theses/available/etd-12032004-110007/.
K. Wang et al, Modeling and Analysis of Cracked Composite Cantilever Beam Vibrating in Coupled Bending and Torsion, Journal of Sound and Vibration, 284 (2005), 23-49.
P. M. Pawar, Structural Health Monitoring of Composite Helicopter Rotor Blades, PhD Dissertation, Dept. Aerospace Eng., Indian Institute of Science, Bangalore, India, 2006; http://etd.ncsi.iisc.ernet.in/handle/2005/273
M.-H. H. Shen and C. Pierre, Free Vibrations of Beams with Single-Edge Crack, Journal of Sound and Vibration 170 (2) (1994), 237-259.
S. M. Ghoneam, Dynamic Analysis of Open Cracked Laminated Composite Beams, Composite Structures, 32 (1995), 3-11.
G. Bao et al, The Role of Material Orthotropy in Fracture Specimens for Composites, International Journal of Solids and Structures, 29 (1992), 1105-1116.
H Tada, PC Paris, GR Irwin, The Stress Analysis of Cracks Handbook, 3rd ed. (ASME Press, New York, 2000).
M. Krawczuk, A New Finite Element for the Static and Dynamic Analysis of Cracked Composite Beams, Computer and Structures 52(3) (1994), 551-561.
M. Krawczuk and W. M. Ostachowicz, Modeling and Vibration Analysis of a Cantilever Composite Beam with a Transverse Open Crack, Journal of Sound and Vibration 183(1) (1995), 69-89.
M. Kisa et al, Free Vibration Analysis of Cracked Beams by a Combination of Finite Elements and Component Mode Synthesis Methods, Computer and Structures, 67 (1998) 215-223.
C. Hwu and H. S. Gai, Vibration Analysis of Composite Wing Structures by a Matrix Form Comprehensive Model, AIAA Journal 41(11) (2003), 2261-2273.
J. R. Banerjee and F. W. Williams, Free Vibration of Composite Beams- An Exact Method Using Symbolic Computation, Journal of Aircraft 32(3) (1995), 636-642.
J. R. Banerjee and F. W. Williams, Exact Dynamic Stiffness Matrix for Composite Timoshenko Beams With Applications, Journal of Sound and Vibration. 194(4) (1996), 573-585.
J. R. Banerjee, Free Vibration of Axially Loaded Composite Timoshenko Beams Using the Dynamic Stiffness Matrix Method, Computer and Structures 69 (1998), 197-208.
Hashemi, S. M. and Richard, M. J. “A New Dynamic Finite Element (DFE) Formulation on Lateral Free Vibrations of Euler-Bernoulli Spinning Beams Using Trigonometric Shape Functions.” Journal of Sound and Vibration, Vol. 220, No. 4, 1999, pp. 601-624.
S. M. Hashemi and S. R. Borneman, Application of Frequency Dependent Trigonometric Shape Functions in the Vibration Analysis of Laminated Composite Beams, CD proceedings of the Fourth Canadian-International Composites Conference, CanCom03, 1-11 (2003).
S. M. Hashemi and S. R. Borneman, A Dynamic Finite Element Formulation for the vibration Analysis of Laminated Tapered Composite Beams, CD proceedings of the Sixth Canadian-International Composites Conference, Cancom05, 1-13 (2005).
S. M. Hashemi and A. Roach, Extension-Torsion Coupled Vibration of Composite Tubes: A Dynamic Finite Element, submitted to Computer & Structures (2007).
S. Borneman, S. M. Hashemi, H. Alighanbari, "The Application of Trigonometric Shape Functions in Vibration Analysis of Cracked Composite Beams", Proceedings of the 6th Joint Canada-Japon workshop on Composites, Canjap06 (2006)
S. Borneman, S. M. Hashemi, H. Alighanbari, Free Vibration Analysis of Cracked Composite Beams: A Dynamic Finite Element, CD proceedings of the 48th AIAA/ASME/ASCE/AHS/ ASC Structures, Structural Dynamics, and Materials Conf, 1-12 (2007).
W. H. Wittrick, and F. W. Williams, A General Algorithm for Computing the Natural Frequencies of Elastic Structures, Quart. Jour. Mech. and Applied Math, Vol. XXIV, Pt. 3 (1971), 263-284.
K. Nikpour, A.D. Dimarogonas, Local Compliance of Composite Cracked Bodies, Composites Science and Technology 32, (1988), 209–223.
- There are currently no refbacks.
Please send any question about this web site to email@example.com
Copyright © 2005-2021 Praise Worthy Prize