Issue | Title | |
Vol 7, No 1 (2014) | Design and Realization of Maximum Boost Switched Inductor Z-Source Inverter for Three Phase On-Line UPS | Abstract |
K. Chitra, A. Jeevanandham, Nimitha Ashok | ||
Vol 6, No 2 (2013) | Design and Simulation of PV Driven Three Phase Induction Motor | Abstract |
Muthamizhan Thiyagarajan, R. Ramesh | ||
Vol 6, No 1 (2013) | Design of a Human Machine Interface for a Mobile Machine Using Simulation in Virtual Reality Environment | Abstract |
Jani Heikkinen, Heikki Handroos | ||
Vol 6, No 4 (2013) | Design of a New Discrete Sliding Mode Optimal Controller for Load Frequency Control in Multi Area Deregulated Power System | Abstract |
A. Ganga Dinesh Kumar, N. Venkata Ramana | ||
Vol 14, No 6 (2021) | Design of Active Tyre-Suspension-Seat System Through Multibody Model and Genetic Algorithms | Abstract |
Michele Calì, Salvatore Massimo Oliveri | ||
Vol 15, No 2 (2022) | Design of an AC Voltage Regulator Using a Harmonic Free TCR | Abstract |
Abdulkareem Mokif Obais | ||
Vol 16, No 2 (2023) | Design of an Active Dual-Axis Solar Tracking System Using Fuzzy Ant Colony Controller | Abstract |
Imam Abadi, Rezi Delfianti, Malak Ihwani | ||
Vol 9, No 6 (2016) | Design of Automatic Identification System (AIS) Receiver for Low Earth Orbit (LEO) Satellite | Abstract |
Emir Husni | ||
Vol 6, No 2 (2013) | Design of D-STATCOM for Power Factor Correction in a Medium Transmission Line Using Vector Based Hysteresis Current Controller | Abstract |
S. Vishnuvardhan, S. S. Sudharshan, K. Murugesan, Ranganath Muthu | ||
Vol 8, No 3 (2015) | Design of ECG Transmitter for Wireless Biomedical Systems | Abstract |
Nadia Ghariani, Mondher Chaoui, Mongi Lahiani, Hamadi Ghariani | ||
Vol 6, No 3 (2013) | Design of Embedded Controller for Web-Based Remote Diagnostics of Electrical Drives | Abstract |
R. Subramaniyan, R. Ramesh | ||
Vol 15, No 3 (2022) | Design of Permanent Magnet Synchronous Motor by Means of Power Density Optimization For e-Vehicle Applications | Abstract |
Hela Kolsi, Naourez Ben Hadj, Mohamed Chaieb, Rafik Neji | ||
Vol 6, No 3 (2013) | Design of Robust Controller for Load Frequency Control in Deregulated Hydro-Thermal System Using Sliding Mode Controlled Strategies | Abstract |
L. Shanmukha Rao, N. Venkata Ramana | ||
Vol 6, No 2 (2013) | Design of Sliding Mode Observer Based Optimal Controller for Load Frequency Control in Multi Area Deregulated Thermal System Connected with HVDC Link | Abstract |
T. Anil Kumar, N. Venkata Ramana | ||
Vol 7, No 1 (2014) | Design of Super-Capacitor based Frequency Control Ancillary Services with the Computation of Ancillary Service Requirement Assessment Indices | Abstract |
N. D. Sridhar, I.A. Chidambaram | ||
Vol 12, No 3 (2019) | Design of Supervisory Fault Tolerant Control for Wind Turbine Generator System Operated in Region II | Abstract |
Katherin Indriawati, Ali Musyafa, Bambang Lelono Widjiantoro | ||
Vol 10, No 1 (2017) | Design Simulations and Force Analysis of a Permanent Magnet Linear Synchronous Motor | Abstract |
Peter Uzunov, Mladen Banovic | ||
Vol 11, No 6 (2018) | Design Simulations of Synchronous Counters with Different Modulus by Harnessing IC 74HC163 | Abstract |
Milaim Zabeli, Nebi Caka, Myzafere Limani, Qamil Kabashi | ||
Vol 15, No 6 (2022) | Designing the Sowing Unit of a Seeder with an Anchor Furrow Opener | Abstract |
Ildar Badretdinov, Salavat Mudarisov, Eduard Khasanov, Ildar Farkhutdinov, Almaz Mustafin, Damir Khaliullin | ||
Vol 12, No 5 (2019) | Detection and Measurement of the Unknown Moment and Magnitude of the Gaussian Random Process Energy Parameter Abrupt Change | Abstract |
Oleg Vyacheslavovich Chernoyarov, Branislav Dobrucky, Alexandra Valerievna Salnikova, Alexander Andreevich Makarov | ||
Vol 6, No 1 (2013) | Detection of Eccentricity in Squirrel Cage Induction Motors by Finite Element Method | Abstract |
Mahdi Ahmadi, Javad Poshtan, Majid Poshtan | ||
Vol 9, No 6 (2016) | Determination of Ultrasonic Waves’ Propagation Angles for the Numerical Reconstruction of Thermite Welding Rail's Defects | Abstract |
Oussama Bouazaoui, Abdelkrim Chouaf | ||
Vol 7, No 6 (2014) | Development of a Semi-Empirical Model for Description of PEMFC Polarization Curve Based on Effect of Fuel Crossover and Internal Current Through a PEM | Abstract |
Adil Atifi, Abdellatif El Marjani, Hamid Mounir | ||
Vol 8, No 3 (2015) | Development of a Very High Pressure Ratio Single Stage Centrifugal Compressor | Abstract |
Valeriu Dragan, Ion Malael, Bogdan Gherman | ||
Vol 7, No 4 (2014) | Development of Control Interface for HIL Simulation of Electro-Hydraulic Energy Converter | Abstract |
Lauri Olavi Luostarinen, Rafael Åman, Heikki Handroos | ||
Vol 7, No 1 (2014) | Development of Fuzzy Logic Controller for DC-DC Converter in Electric Vehicle | Abstract |
Mardhiah Saripudin, Muhamad Bin Mansor | ||
Vol 16, No 2 (2023) | Development of Low-Cost Wave Measurement Model Using Ultrasonic Sensor JSN-SR04T for Supporting Seakeeping Test in the Maneuvering and Engineering Ocean Basin (MOB) | Abstract |
Hardi Zen, Indra Ranu Kusuma, Endang Widjiati | ||
Vol 6, No 1 (2013) | DFIG Driven Wind Turbine Grid Fault-Tolerance Using High-Order Sliding Mode Control | Abstract |
Mohamed Benbouzid, Brice Beltran, Marwa Ezzat, Sylvie Breton | ||
Vol 6, No 6 (2013) | Diagnosis of Stator Winding Short Circuit Fault in Three Phase Squirrel Cage Induction Machine | Abstract |
K. Deepa, P. Vanaja Ranjan, S. Deepa | ||
Vol 11, No 2 (2018) | Diagnosis of SVM Controlled Three-Phase Rectifier Using Mean Value of Park Currents Technique | Abstract |
Amine Mohamed Khelif, Bilal Djamal Eddine Cherif, Azeddine Bendiabdellah | ||
Vol 6, No 4 (2013) | Diagonal Detection Filter for Simultaneous Faults in Networked Control Systems | Abstract |
Ben Mabrouk Zaineb, Aicha Abid, Mouna Ben Hamed, Lassaâd Sbita | ||
Vol 9, No 5 (2016) | Digital Design of Robust Fractional PID Controller for Uncertain Systems | Abstract |
B. Saidi, Messaoud Amairi, Slaheddine Najar, Mohamed Aoun | ||
Vol 8, No 2 (2015) | Discrete Modeling and Experimental Validation of the Model of a Cantilever Flexible Beam | Abstract |
Antonio Carlos de Assis Silva, João Bosco Gonçalves, Alvaro Manoel de Souza Soares | ||
Vol 6, No 3 (2013) | Distributed Generation and Smart Grid Course for an Electrical Engineering Technology Program | Abstract |
Francisco J. Perez-Pinal, Nafia Al-Mutawaly, José Cruz Núñez Pérez | ||
Vol 13, No 4 (2020) | Drug Therapy Optimization System Based on a Hybrid Approach Combining Clinical Data and In Silico Modeling - Perspective View and Concept Description | Abstract |
Bartosz Baliś, Aleksander Byrski, Lena Dekster, Wojciech Frącz, Joanna Giebułtowicz, Marek Kisiel-Dorohinicki, Aleksander Mendyk, Maciej Pawlik, Roman Piotrowski, Wojciech Turek, Barbara Wiśniowska, Sebastian Polak | ||
Vol 6, No 3 (2013) | Dual Generator Cluster Transient Stability Assessment Using Swallowtail Catastrophe Theory | Abstract |
I. Bugis, Maithem Hassen Kareem | ||
Vol 6, No 5 (2013) | Dual Z-Source Three Level Inverter Topology with Triplen Harmonic Elimination Employing Clamping Capacitor for Impedance Network for Open End Stator Winding Induction Motor | Abstract |
C. L. Kuppuswamy, T. A. Raghavendiran | ||
Vol 7, No 6 (2014) | Dynamic Analysis of Gate Operated Magnetic Piston (GOPI) Engine Using ANSYS Software | Abstract |
Manoj Kumar Gattani, P. S. Venkateswaran, Pradeepta K. Sahoo, Parag Diwan | ||
Vol 14, No 5 (2021) | Dynamic Economic Dispatch with Integration of Compressed Air Energy Storage Considering Large Penetration of Photovoltaic Generation Systems | Abstract |
Patria Julianto, Adi Soeprijanto, Mardlijah Mardlijah | ||
Vol 8, No 3 (2015) | Dynamic Magnetic Circuit Modelling of Permanent Magnet Linear Motor Including End-Effects | Abstract |
Marko Huikuri, Markku Niemelä, Juha J. Pyrhönen | ||
Vol 7, No 4 (2014) | Dynamic Modelling and Fault Diagnosis of an Induction Motor | Abstract |
Tanuj Sen, Hari Om Bansal | ||
Vol 10, No 4 (2017) | Dynamic Models of a Self-Excited Induction Generator Taking Iron Losses Into Account: a Comparative Study | Abstract |
Rabah Rouas, Madjid Sibrahim, Salah Haddad, Nacereddine Benamrouche | ||
Vol 6, No 2 (2013) | Dynamic Synthesis of the Rotary Cam and Translated Tappet with Roll | Abstract |
Florian Ion T. Petrescu, Relly Victoria V. Petrescu | ||
Vol 9, No 2 (2016) | Dynamical Model and Prototype Tests of a Self-Adaptive Mechanical Hand | Abstract |
Vincenzo Niola, Cesare Rossi, Sergio Savino | ||
Vol 16, No 1 (2023) | Dynamics of Elastic Systems with Particular Constrains by Means of the Small Parameter Approach | Abstract |
Luisa Toscano | ||
Vol 14, No 2 (2021) | Early Detection of Cardiac Diseases from Electrocardiogram Using Artificial Intelligence Techniques | Abstract |
Ahmad Bataineh, Wafa Batayneh, Tasneem Harahsheh, Kholoud Hijazi, Ayman Alrayes, Mahakem Olimat, Asma Bataineh | ||
Vol 6, No 3 (2013) | Economic Design of Stand-Alone Photovoltaic System for a Selected Location | Abstract |
P. Vijayapriya, D. P. Kothari, M. Kowsalya | ||
Vol 14, No 1 (2021) | Effect of Absorber (Acceptor) and Buffer (Donor) Layers Thickness on Mo/CdTe/CdS/ITO Thin Film Solar Cell Performance: SCAPS-1D Simulation Aspect | Abstract |
Samer H. Zyoud, Ahed H. Zyoud | ||
Vol 11, No 4 (2018) | Effect of Open Circuit Fault on PMSM Drive Controlled by Sliding Mode Control and Feedback Linearization Using Time and Frequency Analysis | Abstract |
Mohammed Benali Mazari, Ahmed Hamida Boudinar, Benyounes Mazari | ||
Vol 13, No 6 (2020) | Effect of Profile Shift Factor on Contact Stress and Natural Frequencies of Spur Gear | Abstract |
Samya Belarhzal, El Mostapha Boudi | ||
251 - 300 of 837 Items | << < 1 2 3 4 5 6 7 8 9 10 > >> |
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize