Experimental and CFD Characterization of the Jacket Vessel Heat Transfer Process
Heat exchange processes are widely applicable in industry and research. The process of design and optimization of these types of devices is of particular interest, since they generate a high rate of exergy destruction. In this study, a correlation between the data presented by the OpenFOAM® software computer model of the assembly of a jacketed vessel heat exchanger has been made. The influence of the overall heat transfer coefficient on the temperature profile and the relationship between Reynolds number and the heat yielded by hot water have been studied. It has been concluded that the theoretical-experimental model has an analogy with the CFD one, which has showed an admissible error of 9.3% for different volumetric flows in relation to the overall heat transfer coefficient and temperature. Therefore, it shows a significant advantage in the use of the computational model to find a correlation with the experimental data. Additionally, the cost of experimentation can be reduced using computational tools.
Copyright © 2020 Praise Worthy Prize - All rights reserved.
T. Ma, M.-J. Li, J.-L. Xu, and F. Cao, Thermodynamic analysis and performance prediction on dynamic response characteristic of PCHE in 1000 MW S-CO2 coal fired power plant, Energy, vol. 175, pp. 123–138, 2019.
S. Lal et al., CFD modeling of convective scalar transport in a macroporous material for drying applications, International Journal of Thermal Sciences, vol. 123, pp. 86–98, Jan. 2018.
X. Li, G. Xie, J. Liu, and B. Sunden, Parametric study on flow characteristics and heat transfer in rectangular channels with strip slits in ribs on one wall, International Journal of Heat and Mass Transfer, vol. 149, p. 118396, Mar. 2020.
X. Wang et al., Study on the water seal formation process in advanced PWR pressurizer using CFD method, Annals of Nuclear Energy, 2020.
C. Abeykoon, Compact heat exchangers – Design and optimization with CFD, International Journal of Heat and Mass Transfer, 2020.
C. G. du Toit and H. J. van Antwerpen, Effect of reactor vessel cooling insulation and reflector heat pipes on the temperatures of a pebble-bed reactor using a system CFD approach, Nuclear Engineering and Design, vol. 357, p. 110421, 2020.
M. H. A. Piro et al., Fluid flow in a diametrally expanded CANDU fuel channel – Part 2: Computational study, Nuclear Engineering and Design, vol. 357, p. 110372, 2020.
B. Kütük and İ. H. Güzelbey, Computational fluid dynamics analyses of a VVER-1200 nuclear reactor vessel for symmetric inlet, asymmetric inlet, and LOCA conditions, International Journal of Pressure Vessels and Piping, vol. 187, p. 104165, 2020.
G. Vijaya Kumar, M. Kampili, S. Kelm, K. Arul Prakash, and H.-J. Allelein, CFD modelling of buoyancy driven flows in enclosures with relevance to nuclear reactor safety, Nuclear Engineering and Design, vol. 365, p. 110682, 2020.
M. Colombo and M. Fairweather, Application of CFD modelling to external nuclear reactor vessel cooling, in 28 European Symposium on Computer Aided Process Engineering, vol. 43, A. Friedl, J. J. Klemeš, S. Radl, P. S. Varbanov, and T. B. T.-C. A. C. E. Wallek, Eds. Elsevier, 2018, pp. 1027–1032.
A. Eltayeb, S. Tan, Z. Qi, A. A. Ala, and N. M. Ahmed, PLIF experimental validation of a FLUENT CFD model of a coolant mixing in reactor vessel down-comer, Annals of Nuclear Energy, vol. 128, pp. 190–202, 2019.
J. Wutz, B. Waterkotte, K. Heitmann, and T. Wucherpfennig, Computational fluid dynamics (CFD) as a tool for industrial UF/DF tank optimization, Biochemical Engineering Journal, vol. 160, p. 107617, 2020.
L. Castro, J.-L. François, and C. García, Coupled Monte Carlo-CFD analysis of heat transfer phenomena in a supercritical water reactor fuel assembly, Annals of Nuclear Energy, vol. 141, p. 107312, 2020.
T. Ziegenhein, D. Lucas, G. Besagni, and F. Inzoli, Experimental study of the liquid velocity and turbulence in a large-scale air-water counter-current bubble column, Experimental Thermal and Fluid Science, vol. 111, no. October 2019, p. 109955, 2020.
A. M. González, M. Vaz, and P. S. B. Zdanski, A hybrid numerical-experimental analysis of heat transfer by forced convection in plate-finned heat exchangers, Applied Thermal Engineering, vol. 148, pp. 363–370, Feb. 2019.
C. Windt et al., Validation of a CFD-based numerical wave tank model for the power production assessment of the wavestar ocean wave energy converter, Renewable Energy, vol. 146, pp. 2499–2516, 2020.
D. Yang, T. S. Khan, E. Al-Hajri, Z. H. Ayub, and A. H. Ayub, Geometric optimization of shell and tube heat exchanger with interstitial twisted tapes outside the tubes applying CFD techniques, Applied Thermal Engineering, vol. 152, pp. 559–572, Apr. 2019.
A. S. Ambekar, R. Sivakumar, N. Anantharaman, and M. Vivekenandan, “CFD simulation study of shell and tube heat exchangers with different baffle segment configurations,” Applied Thermal Engineering, vol. 108, pp. 999–1007, Sep. 2016.
A. Zargoushi, F. Talebi, and S. H. Hosseini, CFD modeling of industrial cold box with plate-fin heat exchanger: Focusing on phase change phenomenon, International Journal of Heat and Mass Transfer, vol. 147, p. 118936, Feb. 2020.
D. Y. Kim and H. C. No, A CFD-based design optimization of air-cooled passive decay heat removal system, Nuclear Engineering and Design, vol. 337, pp. 351–363, Oct. 2018.
W. M. Hashim, H. A. Hoshi, and H. A. Al-Salihi, Enhancement the performance of swirl heat exchanger by using vortices and NanoAluminume, Heliyon, vol. 5, no. 8, p. e02268, 2019.
F. Alshammari, A. Karvountzis-Kontakiotis, A. Pesiridis, and T. Minton, Radial expander design for an engine organic Rankine cycle waste heat recovery system, Energy Procedia, vol. 129, pp. 285–292, 2017.
F. Chen, Y. Lu, X. Chen, Z. Li, X. Yu, and A. P. Roskilly, Numerical study of using different Organic Rankine cycle working fluids for engine coolant energy recovery, Energy Procedia, vol. 142, pp. 1448–1454, 2017.
L. L. Tong, L. Q. Hou, and X. W. Cao, Analysis of the flow distribution and mixing characteristics in the reactor pressure vessel, Nuclear Engineering and Technology, 2020.
De la Hoz, J., Valencia, G., Duarte Forero, J., Reynolds Averaged Navier–Stokes Simulations of the Airflow in a Centrifugal Fan Using OpenFOAM, (2019) International Review on Modelling and Simulations (IREMOS), 12 (4), pp. 230-239.
Obregon, L., Valencia, G., Duarte Forero, J., Efficiency Optimization Study of a Centrifugal Pump for Industrial Dredging Applications Using CFD, (2019) International Review on Modelling and Simulations (IREMOS), 12 (4), pp. 245-252.
R. Ramirez, E. Avila, L. Lopez, A. Bula, and J.D. Forero, CFD characterization and optimization of the cavitation phenomenon in dredging centrifugal pumps, Alexandria Engineering Journal, vol. 59, no. 1, pp. 291-309, Feb. 2020.
C.A.F. Conrado, R.P. Arrieta, and J.D. Forero, Centrifugal pump energy optimization through parametric analysis in CFD and energy loss models, INGE CUC, vol. 16, no. 1, pp. 1-21, Jan. 2020.
M. Riella, R. Kahraman, and G. R. Tabor, Fully-coupled pressure-based two-fluid solver for the solution of turbulent fluid-particle systems, Computers and Fluids, vol. 192, 2019.
G. J. Brown, D. F. Fletcher, J. W. Leggoe, and D. S. Whyte, Application of hybrid RANS-LES models to the prediction of flow behaviour in an industrial crystalliser, Applied Mathematical Modelling, vol. 77, pp. 1797–1819, 2020.
- There are currently no refbacks.
Please send any question about this web site to email@example.com
Copyright © 2005-2022 Praise Worthy Prize