The Influence of Distributing the Conveyor Suspensions with Suspended Belt and Distributed Drive on Its Main Technical Characteristics
(*) Corresponding author
DOI: https://doi.org/10.15866/iremos.v11i3.12796
Abstract
This research goal is to determine the rational number of drive and non-drive suspensions on a conveyor track with suspended belt and distributed drive. The article provides a methodology to calculate the conveyor main technical characteristics. Based on the previously developed mathematical model of the conveyor with suspended belt and distributed drive, a series of computations is performed and the results of changes in the conveyor main technical characteristics are shown, varying the number of suspensions types.
Copyright © 2018 Praise Worthy Prize - All rights reserved.
Keywords
Full Text:
PDFReferences
Antonyak Ezhi. Theoretical research and designing the advanced belt conveyors. Gorny informatsionno-tekhnichesky bulleten [Mining informational and analytical bulletin], No. 10: 154-157, 2003.
O. E. Sheshko. Ecological and Economic Assessment of the Advanced Rock Machines. Nauchny vestnik MGGU [The Journal of Moscow State Mountain University], Moscow, No. 12: 281–288, 2013.
Y. A. Bakhturin Modern Open-Cut Transport. Reference book «Gornaya Tekhnika 2005». pp. 6-16.
O. T. Balabayev Special Course of Study of Conveyor Transport. Karaganda Sate Technical University. Karaganda, 2015. 178 p.
R. T. Swinderman, L. J. Goldbeck, A.D. Marti. Foundations-3 The Practical Resource for Total Dust and Material Control. Martin Engineering Neponset, Illinois. USA, 2002. 216 p.
Devendra Kumar, R. K. Mandloi. Analysis & Prospects of Modification in Belt Conveyors. International Journal of Engineering Research and Applications (IJERA), Vol. 3 (Issue 1): 581-587, 2013.
Raghvendra Singh Gurjar, Arvind Yadav. Failure Analysis of Belt Conveyor system in a Thermal Power Plant. International Journal of Advanced Technology & Engineering Research (IJATER), Vol. 2 (Issue 3): 195-200: 2012.
V. I. Averchenkov, S. V. Davydov, V. P. Dunaev, V. N. Ivchenko, S. V. Kurov, M. Yu. Rytov, V. I. Sakalo, Conveyors with suspended belt (Moscow, Mashinostroenie-1, 2004).
Y. A. Podoprigora, V. N. Ivchenko, V. F. Schupanovsky. The introduction of the conveyor with suspended belt. Gorny Zhurnal [Mountain Journal], No. 5-6: 72-75, 1997.
V. N. Ivchenko, S. V. Kurov, S. V. Davidov, V. Y. Babay. Maintaining the conveyors with suspended belt. Gorny Zhurnal [Mountain Journal], No. 3: 66-70, 2003.
V. N. Ivchenko, S. V. Kurov. Non-spilling belt conveyors. Gornaya Promyshlennost [Mining Engineering], No. 4 (62): 39-42, 2005.
Y. A. Podoprigora, V. N. Ivchenko. The designing and technological aspects of constructing and maintaining the belt conveyors with the suspended belt. Nedelya Gornyaka [The Miner’s Weekly]. Moscow, MGGU. 99-102, 1999.
P. V. Boslovyak, E. P. Zueva. Comparative analysis of steel structures stationary conveyors with hanging belt. Nauchno-tekhnicheskiy vestnik Bryanskogo gosudarstvennogo universiteta, No. 2: 59-65, 2016. URL: http://ntv-brgu.ru/wp-content/arhiv/2016-N2/2016-02-05.pdf.
P. V. Boslovyak, E. P. Zueva. Universal method for optimal design main structural assemblies of steel structures stationary conveyor with hanging ribbon. Nauchno-tekhnicheskiy vestnik Bryanskogo gosudarstvennogo universiteta, No. 1: 32-42, 2015. URL: http://ntv-brgu.ru/wp-content/arhiv/2015-N1/2015-01-07.pdf.
P. V. Boslovyak, E. P. Zueva. The effect of stress relaxation on the parameters of machining and inspection tooling. Nauchno-tekhnicheskiy vestnik Bryanskogo gosudarstvennogo universiteta, No. 2: 23-30, 2015. URL: http://ntv-brgu.ru/wp-content/arhiv/2015-N2/2015-02-03.pdf.
P. V. Boslovyak, E.P. Zueva. Realization methodology for optimal design of steel structures conveyors with hanging belt. Nauchno-tekhnicheskiy vestnik Bryanskogo gosudarstvennogo universiteta, No. 1: 37-45, 2016. URL: http://ntv-brgu.ru/wp-content/arhiv/2016-N1/2016-01-04.pdf.
K. A. Vasyliev, A. K. Nokolayev, K. G. Sazonov. Transport machines and mining equipment. SPb, Lan’ Publishing House, 2012. 544 p.
A. V. Lagerev, V. P. Dunaev. Conveyors with suspension carrying belt - new type of continuous transport machines. Inzhenerniy zhurnal. Spravochnik, No.10: 9-14. 2009.
D. E. Lunev. Justification of rational design and operational parameters of conveyor with suspended belt for the mining industry, Cand. Diss. (Engineering), SPb, 2007. 119 p.
A. V. Lagerev, E. N. Tolkachev, P. V. Boslovyak. Design and research of the conveyor with hanging ribbon. Bryansk, RIO BGU, 2016. 303 p.
E. N. Tolkachev. Analysis of the dynamics of suspensions of discrete section of the conveyor with suspended belt and distributed drive. Nauchno-tekhnicheskiy vestnik Bryanskogo gosudarstvennogo universiteta, No. 1: 55-64, 2015. URL: http://ntv-brgu.ru/wp-content/arhiv/2015-N1/2015-01-10.pdf.
A. V. Lagerev, E. N. Tolkachev. The study of the motion of suspensions of discrete section of a conveyor with suspended belt, distributed drive, and the vertically-closed track with the single-mass dinamic model, Vestnik Bryanskogo gosudarstvennogo tekhnicheskogo universiteta, No. 4: 33–40, 2013.
E. N. Tolkachev. Analysis of the dynamics of suspensions of discrete section of the conveyor with suspended belt and distributed drive. Nauchno-tekhnicheskiy vestnik Bryanskogo gosudarstvennogo universiteta, No. 1: 55-64, 2015. URL: http://ntv-brgu.ru/wp-content/arhiv/2015-N1/2015-01-10.pdf.
Lagerev, A., Tolkachev, E., Lagerev, I., Modelling of a Vertical Loop Conveyor with Suspended Belt and Distributed Drive, (2016) International Review on Modelling and Simulations (IREMOS), 9 (4), pp. 271-279.
http://dx.doi.org/10.15866/iremos.v9i4.9808
E. N. Tolkachev. Specifics of determining the forces are applied to the suspensions of conveyor with suspended belt and distributed drive, depending on their spatial configuration on the route. Nauchno-tekhnicheskiy vestnik Bryanskogo gosudarstvennogo universiteta, No. 2: 44-51. 2015. URL: http://ntv-brgu.ru/wp-content/arhiv/2015-N1/2015-02-06.pdf.
A. V. Lagerev, E. N. Tolkachev. Mathematical model of a special conveyor with suspended belt and distributed drive, Vestnik Bryanskogo gosudarstvennogo tekhnicheskogo universiteta, No.3: 44 – 52, 2014.
А. V. Darkov, G.S. Shapiro. Structural resistance. Moscow.Visshaya Shkola, 1975. 654 p.
L. N. Аtakulov. Grounding of the transitional section paramters for the loading unit in the steep inclined conveyor with pressure belt designated for the open-pit mining: thesis synopsis. Moscow, 2007. 24 p.
S. М. Nikolsky The Course of Mathematical Analysis. Моscow. Fiziko-matematicheskaya literatura (Physics and Mathematics literature), 2000. – 592 p.
А. V. Аleksandrov, V. D. Potapov, B. P. Derzhavin Structural resistance. Moscow.Visshaya Shkola,. 2004. 560 p.
I. A. Lagerev. Loadlifting machines calculations by finite element method. Bryansk, BSTU, 2013. 116 p.
N. A. Titov. Nonlinear finite element calculations in problems of strength of lifting-transport machines. Nauchno-tekhnicheskiy vestnik Bryanskogo gosudarstvennogo universiteta. No. 2: 51-58, 2016. URL: http://ntv-brgu.ru/wp-content/arhiv/2016-N2/2016-02-04.pdf.
A.V. Vershinckii, I.A. Lagerev, A.N. Shubin, A.V. Lagerev Raschet metallicheskikh konstructsiy podyemno-transportnykh mashin metodom konechnykh elementov [Calculation of metal constructions of lifting-transport machines by finite element method]. Bryansk, Bryanskiy Gosudarstvennyy Universitet, 2015. 210 p.
Refbacks
- There are currently no refbacks.
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize