Open Access Open Access  Restricted Access Subscription or Fee Access

FET-Based Numerical Modeling of a Self-Excited Induction Generator Driven by a Controlled DC Motor


(*) Corresponding author


Authors' affiliations


DOI: https://doi.org/10.15866/iremos.v9i5.10428

Abstract


In this paper, a new and non-traditional approach is proposed for modeling a selfexcited induction generator (SEIG) driven by a controlled DC motor. The algorithm used in this paper is based on a modified finite element technique (FET) and the trapezoidal rule time integration. Unlike the conventional FET-based models, in the proposed numerical model, addition of equations is avoided and the global set of equations is solved iteratively. A MATLABSimulink model of the system is developed for comparison.
Copyright © 2016 Praise Worthy Prize - All rights reserved.

Keywords


Finite Element Technique; Newton-Raphson Method; Numerical Analysis; Self-Excited Induction Generator; Trapezoidal Rule

Full Text:

PDF


References


M.G. Simoes, S. Chakraborty, R. Wood, Induction generators for small wind energy systems, IEEE Power Electronics Society Newsletter, 19-23, Third Quarter 2006.
http://dx.doi.org/10.1109/epec.2009.5455106

Barara, M., Chimezie, A., Al Sayari, N., Beig, A., Al Hosani, K., Abbou, A., Akherraz, M., Hardware Implementation of Voltage Control for Self Excited Induction Generator Used in Small Power Generation, (2015) International Review of Electrical Engineering (IREE), 10 (4), pp. 553-560.
http://dx.doi.org/10.15866/iree.v10i4.6978

M. Bašić, D. Vukadinović, G. Petrović, Dynamic and pole-zero analysis of self-excited induction generator using a novel model with iron losses, International Journal of Electrical Power and Energy Systems, Vol. 42(Issue 1):105-118, November 2012.
http://dx.doi.org/10.1016/j.ijepes.2012.03.003

O.C. Zienkiewicz, R.L. Taylor, The Finite Element Method – Vol 1 (McGraw-Hill, 1989).
http://dx.doi.org/10.1016/b978-075066431-8.50182-x

O.C. Zienkiewicz, R.L. Taylor, The Finite Element Method – Vol 2 (McGraw-Hill, 1989).
http://dx.doi.org/10.1016/b978-075066431-8.50182-x

V. Jović, Modeling of Non-Steady Flow in Pipe Networks, International Conference on Numerical Methods in Engineering: Theory and Applications, Swansea, England, July 1987.
http://dx.doi.org/10.1007/978-94-009-3655-3_43

J. Jin, The Finite Element Method in Electromagnetics (John Wiley & Sons, 1993).
http://dx.doi.org/10.1109/9780470544655.ch3

S. Vujević, I. Jurić-Grgić, R. Lucić, Time-Harmonic and Transient Linear Circuit Analysis Using Finite Element Technique, (2008) International Review on Modelling and Simulations (IREMOS), 1 (2), 275-280.

Selmi, M., Rehaoulia, H., Performance Evaluation of Self-Excited Induction Generators, (2014) International Review of Automatic Control (IREACO), 7 (1), pp. 38-44.

Sibrahim, M., Haddad, S., Denoun, H., Benamrouche, N., Transient and Steady State Study of a Self-Excited Induction Generator, (2014) International Review on Modelling and Simulations (IREMOS), 7 (3), pp. 379-386.

I. Boldea, S.A. Nasar, The Induction Machine Handbook (CRC Press, 2002).
http://dx.doi.org/10.1201/9781420042658

M. Bašić, Vector Control System of a Self-Excited Induction Generator Including Iron Losses, Ph.D. dissertation, Dept. of Electric Eng., Univ. of Split, Croatia, 2013.
http://dx.doi.org/10.1016/j.conengprac.2012.11.004

D. Seyoum, C. Grantham, M. Fazlur Rahman, The Dynamic Characteristics of an Isolated Self-Excited Induction Generator Driven by a Wind Turbine, IEEE Transactions on Industry Applications, Vol. 39(Issue 4):936-944, July-August 2003.
http://dx.doi.org/10.1109/tia.2003.813738

K.L. Hiebert, An Evaluation of Mathematical Software that Solves Systems of Nonlinear Equations, ACM Transactions on Mathematical Software, Vol. 8(Issue 1):5-20, March 1982.
http://dx.doi.org/10.1145/355984.355986

R.L. Burden, J. Douglas Faires, Numerical Analysis (Brooks/Cole, 2000).
http://dx.doi.org/10.2307/2321633

Simulink User’s Guide (The MathWorks, 2014).
http://dx.doi.org/10.1515/9783110375596-002

A. Vande Wouwer, P. Saucez, C. Vilas Fernandez, Simulation of ODE/PDE Models with MATLAB, OCTAVE and SCILAB (Springer, 2014).
http://dx.doi.org/10.1007/978-3-319-06790-2

H. Klee, R. Allen, Simulation of Dynamic Systems with MATLAB and Simulink (CRC Press, 2011).
http://dx.doi.org/10.1115/imece2011-62704

Taktak, M., Ville, J., Haddar, M., Gabard, G., Foucart, F., Acoustic Liners Behavior Investigation Using the Multimodal Scattering Matrix, (2015) International Review of Aerospace Engineering (IREASE), 8 (6), pp. 198-208.
http://dx.doi.org/10.15866/irease.v8i6.8822

Nasri, A., Ben Said, M., Bouzid, W., Tsoumarev, O., A Steady State Thermal Behavior Study of 3D Ball End Milling Model by Using Finite Element Method, (2016) International Review of Aerospace Engineering (IREASE), 9 (2), pp. 51-60.
http://dx.doi.org/10.15866/irease.v9i2.9718

Alshoaibi, A., Ariffin, A., Finite Element Modeling of Fatigue Crack Propagation Using a Self Adaptive Mesh Strategy, (2015) International Review of Aerospace Engineering (IREASE), 8 (6), pp. 209-215.
http://dx.doi.org/10.15866/irease.v8i6.8823

Sun, K., Shi, Y., Huang, L., Li, Y., An Improved Sensorless Control Method for IPMSM-Compressor Drives Based on the MRAS with Motor Parameter Variations, (2014) International Review of Electrical Engineering (IREE), 9 (1), pp. 73-82.

Barta, J., Uzhegov, N., Ondrusek, C., Pyrhönen, J., High-Speed Electrical Machine Topology Selection for the 6kW, 120 000 rpm Helium Turbo-Circulator, (2016) International Review of Electrical Engineering (IREE), 11 (1), pp. 36-44.
http://dx.doi.org/10.15866/iree.v11i1.7687

Liu, H., Hao, Y., Niu, S., Fu, W., Computation of Electromagnetic Losses in Double-Rotor Vernier PM Motors with Three Topologies Using TS-FEM, (2015) International Review of Electrical Engineering (IREE), 10 (1), pp. 22-27.
http://dx.doi.org/10.15866/iree.v10i1.4970


Refbacks

  • There are currently no refbacks.


Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize