Open Access Open Access  Restricted Access Subscription or Fee Access

Hybrid Resolution of Solar Cells Model Parameters Using Analytical and Numerical Method


(*) Corresponding author


Authors' affiliations


DOI: https://doi.org/10.15866/iremos.v8i5.6740

Abstract


This paper presents a simple and accurate method for modeling photovoltaic solar cells panels. The model adopted is single-diode/two resistors, and then, five parameters must be identified. The method uses just the normal data provided by the manufacturer to calculate the model parameters. It based on numerically method to solve one equation expressed as a function of series resistor model, while the other parameters (depending exclusively on the series resistance model) are determined analytically. The accuracy of the resulting model is confirmed experimentally for two modules from different manufacturers and distinct technologies.
Copyright © 2015 Praise Worthy Prize - All rights reserved.

Keywords


Solar Cell; Modeling; Maximum Power Point Trackers (MPPT); Single Diode Model; I-V Curve

Full Text:

PDF


References


G. Dzimano, B.S. “Modeling of Photovoltaic Systems”, The Ohio State University, 2008.

R.G.Ross, “Flat-plate photovoltaic array design optimization”, in 14th IEEE Photovoltaic Specialists Conference, pp. 1126-1132, March 1980.

J. Cubas, S. Pindado, M. Victoria. "On the analytical approach for modeling photovoltaic systems behavior." Journal of Power Sources 247 (2014): 467-474.
http://dx.doi.org/10.1016/j.jpowsour.2013.09.008

H. S. Rauschenbach. Solar cell array design handbook. Van Nostrand Reinhold, 1980.
http://dx.doi.org/10.1007/978-94-011-7915-7

K. Khouzam, L. Cuong, K. K. Chen, and N.Y. Poo, “Simulation and real time modelling of space photovoltaic systems,” IEEE First World Conference Photovoltaic Energy Conversion, Conference Record 24th IEEE Photovoltaic Specialists Conference, pp. 2038-2041, 1994.
http://dx.doi.org/10.1109/wcpec.1994.520770

G. Walker, “Evaluating MPPT converter topologies using matlab PV model,” J. Electr. Electron. Eng., Australia, vol. 21, no.1, pp. 45-55, 2005.

W. Xiao, W.G. Dunford, and A. Capel, “A novel modelling method for photovoltaic cells,” IEEE 35th Annual Power Electronics Specialists Conference (PESC), pp. 1950-1956, 2004.
http://dx.doi.org/10.1109/pesc.2004.1355416

E. Matagne, R. Chenni, and R. El Bachtiri, “A photovoltaic cell model based on nominal data only,” Intl. Conf. Power Eng., Energy Electrical Drives , POWERENG, pp. 562-565, 2007.
http://dx.doi.org/10.1109/powereng.2007.4380173

R. Chenni, M. Makhlouf, T. Kerbache, and A. Bouzid, “A detailed modelling method for photovoltaic cells,” Energy, vol. 32, pp. 1724-1730, 2007.
http://dx.doi.org/10.1016/j.energy.2006.12.006

M. G. Villalva, J. R. Gazoli, and E. R. Filho, “Comprehensive approach to modelling and simulation of photovoltaic arrays,” IEEE Trans. Power Electron., vol. 24, no. 5, pp. 1198-1208, 2009.
http://dx.doi.org/10.1109/tpel.2009.2013862

M. Chegaar, Z. Quennoughi, and A. Hoffman, “A new method for evaluating illuminated solar cell parameters,” Solid State Electron., vol. 45, pp. 293-296, 2001.
http://dx.doi.org/10.1016/s0038-1101(00)00277-x

D. Sera, R. Teodorescu, and R. Rodriguez, “PV panel model based on datasheet values,” IEEE International Symposium on Industrial Electronics (ISIE), pp. 2392-2396, 2007.
http://dx.doi.org/10.1109/isie.2007.4374981

D. King, J. A. Kratochvil, and W. E. Boyson, Proc. 26th IEEE PVSC Anaheim, Calif., (1997), 1183.

S. C. Chapra, “Roots: Open Methods,” in “Applied Numerical Methods with MATLAB for Engineers and Scientists”, New York, NY: McGraw-Hill, 2012, pp. 151-181.

J. Penny , G. Lindfield, “Roots of equations,” in Numerical Methods Using Matlab. Sydney, Australia: Ellis Horwood, 1995, pp. 85-119.

W. De Soto, S. A. Klein, and W. A. Beckman. Improvement and validation of a model for photovoltaic array performance. Solar Energy, 80(1):78–88, January 2006.
http://dx.doi.org/10.1016/j.solener.2005.06.010

Q. Kou, S. A. Klein, and W. A. Beckman. A method for estimating the long-term performance of direct-coupled PV pumping systems. Solar Energy, 64(1-3):33–40, September 1998.
http://dx.doi.org/10.1016/s0038-092x(98)00049-8

R. A. Messenger and J. Ventre. Photovoltaic systems engineering. CRC Press, 2004

K.H. Hussein, I. Muta, T. Hoshino, and M. Osakada.Maximum photovoltaic power tracking: an algorithm for rapidly changing atmospheric conditions. In Generation, Transmission and Distribution, IEE Proceedings-, v. 142, p. 59–64, January 1995.
http://dx.doi.org/10.1049/ip-gtd:19951577

KC200GT High Efficiency Multicrystal Photovoltaic Module Datasheet Kyocera.[Online].Available: http://www.kyocera.com.sg/products/solar/pdf/kc200gt.pdf

Sunpower E18/225 Solar Arrays Datasheet. (2010).[Online].Available: us.sunpower.com/sites/sunpower/files/media-library/data-sheets/ds-e18-series-225-solar-panel-datasheet.pdf

C. Carrero, J. Amador, and S. Arnaltes. A single procedure for helping PV designers to select silicon PV module and evaluate the loss resistances. Renewable Energy, 2007.
http://dx.doi.org/10.1016/j.renene.2007.01.001

http://www.arohatgi.info/WebPlotDigitizer/


Refbacks

  • There are currently no refbacks.



Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize