Open Access Open Access  Restricted Access Subscription or Fee Access

Numerical Modeling of the Phenomenon of Crystallization of Incompressible Fluid Flows into Rigid Pipes. Application to Polymer Melts


(*) Corresponding author


Authors' affiliations


DOI: https://doi.org/10.15866/iremos.v8i1.5141

Abstract


The objective of this study is the effect of the crystallization kinetics the crystalline morphology, the germination and the crystalline growth velocity is to improve the management of bioreactors, existing or future, for this, we presented to material conservation equations, the energy and the differential equations of Schneider. We have developed a numerical model to simulate the behavior coupled mold, using the method of finite differences.
Copyright © 2015 Praise Worthy Prize - All rights reserved.

Keywords


Injection; Polymer; Modeling; Crystallization; Mold; Morphology; Germination; Growth; Numerical Model

Full Text:

PDF


References


C. Pujos , Estimating the Rheology of a polymer in an extrusion die flow simulation with heat transfer and measures Inversion, PhD Thesis, University of Bordeaux I, November 30,2006, pp.19.

Y. Shiraishi, H. Norikane, N. Narazaki, T. Kikutani, International Polymer Processing 17 (2), 2002 ,166-175.
http://dx.doi.org/10.3139/217.1685

S. Philipon, M. Vincent and J.F.Agassant. , Modeling of Injection of Thermoplastics. FSPE (French Society of Plastic Engineers), Ecole Nationale Superieure des Mines, Paris (October 1988).

R. Chang and W. Yang "A Novel Three-Dimensional Analysis of Polymer Injection Molding " National Tsing-Hua University, Hsinchu, Taiwan. 30043, ROC.

D. Garcia, G. Courbebaisse and M. Jourlin." Image Analysis Dedicated To Polymer Injection Molding ". European Polymer Institute (PEP), France ,2001.
http://dx.doi.org/10.5566/ias.v20.p143-148

J.F. Agassant, et M. Vincen., Modeling of injection: Mould filling "Techniques of the Engineer, Plastics and Composites Treaty , Doc.AM3 695, CD-ROM.ver.2001.

M. Taibi, K. Gueraoui, S. Chtioui, A. Echchelh,, Y.M Haddad, M kerroum, G Zeggwagh., Numerical simulation of unsteady flow of molten polymers tapered pipes, Physical and chemical News, 2008 ;42 : 77-83.

Driouich, M., Gueraoui, K., Haddad, Y.M., Hammoumi, A.E., Kerroum, M., Fehri, O.F., Mathematical modeling of non permanent flows of molten polymers, (2010) International Review of Mechanical Engineering (IREME), 4 (6), pp. 689-694.

M. Driouich, K. Gueraoui, M. Sammouda, Y.M. Haddad (2012) «The Effect of the Rheological Characteristics of the molten polymer On Its Flow in Rigid Cylindrical Tubes» Adv. Studies Theor. Phys., Vol. 6, no. 12, 569 – 586.

M. Driouich, K. Gueraoui, M. Sammouda, I. Aberdane, Y.M. Haddad (2012) « The effect of electric field on the flow of a compressible ionized fluid in a cylindrical tube» Adv. Studies Theor. Phys., Vol. 6, no. 13-16, 687-696.

S. Philipo, Injecting molten polymer into the mold. Numerical study of thermomechanical phenomena during the filling phase. PhD Thesis, School of Mines de Paris, 1989.

B. Nadia, Contribution to the modeling of the Crystallization of Polymers in Shear: Application to the injection of semi-crystalline polymers, PhD thesis, National Institue of Applied Sciences in Lyon, 2007 ISAL

Z. Matthieu, Modeling Crystallization of polymers in plastics processes: Quantification of thermal and rheological effects, PhD Thesis, National Institue of Applied Sciences in Lyon, 2010 ISAL

S. Lamaison, A. Allal, F. Leonardi, G. Marin, Modeling of the effect of microstructure on the rheological behavior of molten polymers. rheology, Vol.3, 1-10 (2003).

KK. Gueraoui, M. Taibi, A. Ghouli, A. Mrabti, G. Zeggwagh, Y. M. Haddad, Pulsating Flows of Inelastic Fluids in Anisotropic Porous Viscoelastic Tubes, (2008) International Review of Mechanical Engineering (IREME), 2 (3), pp. 506-512.

K. Gueraoui, A. EL Hammoumi, G. Zeggwagh, Theoretical modeling of pulsed flow of non-Newtonian fluids in pipes porous and anisotropic viscoelastic. C. r. Acad. sci. Ser. 2. Fasc. b. 1998. 326, N 9, pp. 561-568.

S. Men-la-yakhaf, K. Gueraoui, M. Driouich, Numerical and Mathematical Modeling of Reactive Mass Transfer and Heat Storage Installations of Argan Waste, Advanced Studies in Theoretical Physics, (2014), Vol. 8, 2014, no. 10, 485-498.

Men-la-yakhaf, S., Gueraoui, K., Maaouni, A., Driouich, M., Numerical and mathematical modeling of reactive mass transfer and heat storage installations of argan waste, (2014) International Review of Mechanical Engineering (IREME), 8 (1), pp. 236-240.

H. EL-Tourroug, K. Gueraoui, N.Hassanain, I. Modhaffar, S. Men-la-yakhaf , Numerical and Mathematical Modeling of the Injection for incompressible fluids through rigid cylindrical duct : Application of melted polymers PPH, HIKARI, Vol. 8, 2014, no. 177-180.


Refbacks

  • There are currently no refbacks.



Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize