Open Access Open Access  Restricted Access Subscription or Fee Access

Comparison of Methodologies for the Design of Variable Reluctance Machine


(*) Corresponding author


Authors' affiliations


DOI: https://doi.org/10.15866/iremos.v7i5.2372

Abstract


The principles of machines design are available in several different sources; the need to proceed a simple and unified approach is based on the principles of electromagnetism. This article discusses the comparison of methods which can be applied by many manufacturers. In addition to the design of a variable reluctance machine or switched reluctance motor (SRM) using the finite element of, developed permeance networks method program can be used as a tool of verifying the design of the SRM by finite elements. The permeance networks method  is based on the concept of dividing the magnetic circuit of the machine into several areas, each area is materialized by a reluctance, however, this process is laborious because the finite element method is preferable to predict the design parameters before the final verification by networks permeance.
Copyright © 2014 Praise Worthy Prize - All rights reserved.

Keywords


Finite Elements Method (FEM); Permeance Networks Methods (NPM); Variable Reluctance Machine

Full Text:

PDF


References


Faiz J, Raddadi J, Finch J.W , Spice-Based dynamic analysis of Switched Reluctance Motor with multiple teeth per stator pole, IEEE transactions on Magnetics, Volume 38, Issue 4, July 2002, pp1780-1788.
http://dx.doi.org/10.1109/tmag.2002.1017771

T. Latchman, T R Mohamad and C H Fong ,Nonlinear Modeling of Switched Reluctance Motors using artificial Intelligence techniques, IEE Proceedings Power Application Vol 151 No. 1 Jan 2004.pp 53-60
http://dx.doi.org/10.1049/ip-epa:20040025

Vasan Prabhu, V., Rajini, V., Investigation of non linear dynamic characteristics of 8/6 switched reluctance motor drive for variable speed applications - modeling and implementation, (2013) International Review on Modelling and Simulations (IREMOS), 6 (4), pp. 1097-1102.

Ahmad Darabi , Calculation of Local Iron Loss in Electrical Machines Using Finite Elements Method , IEEE Transactions on Energy Conversion, ,pp. 170- 174, June 2007.

B. Bekkouche et A. Chaouch, Analyse for Switched Reluctance Motors Using Permeance Network Method, International Conference on Electrical Engineering Batna 07-08 November 2006.

Wenzhe Lu, Ali keyhani, Harald Klode, Amuliu Proca ,Modeling and Parameter Identification of Switched Reluctance Motors from Operating Data Using Neural Networks, IEEE Proceedings June 2003 ,pp. 1709-1713.
http://dx.doi.org/10.1109/iemdc.2003.1210682

Hao Chen, J.J Gu, Implementation of the Three-Phase Switched Reluctance Machine System for Motors and Generators, Mechatronics, IEEE/ Transactions on, Vol.15 Issue: 3, avril 2010, pp .421 – 432,.
http://dx.doi.org/10.1109/tmech.2009.2027901

D.M.Divan, G. Venkatoramanan , De Doncker, R.W , Design Mmethodologies for soft Sswitched Inverter ,Proce .IEEE industry applications soc.Annu Meeting, 1987, pp.626-636.

X.D.Xue, Apposition stepping method for predicting performances of switched reluctance motor drives ,IEEE transactions on energy conversion, vol.22, no4, December 2007,pp.839-847.
http://dx.doi.org/10.1109/tec.2007.895859

Ahmad Darabi, Colin Tindall, Stuart Ferguson, Finite-Element Time-Step Coupled Generator, Load, AVR and Brushless Exciter Modeling, IEEE Transactions on Energy Conversion, Vol. 19, No. 2, June 2004, pp. 258- 264.
http://dx.doi.org/10.1109/tec.2004.827293

A.Lim, B.Rodrigues F.Xiao , Using an Evolutionary Algorithm for Bandwidth Minimization , Evolutionary Computation, 2003. CEC '03. The 2003 Congress on , Vol1, Dec8-12, 2003, pp678-683.
http://dx.doi.org/10.1109/cec.2003.1299641

W. Wu, J. B. Dunlop, S. J. Collocott, and B. A. Kalan, Design Optimization of a Switched Reluctance Motor by Electromagnetic and thermal finite-element analysis, IEEE Transaction on Magnetic, Vol. 39, No. 5, September 2003, pp. 3334–3336.
http://dx.doi.org/10.1109/tmag.2003.816248

Hennen, M. D., and R. W. De Doncker. ,Comparison of Outer- and Inner-Rotor Switched Reluctance Machines., 7th International Conference on Power Electronics and Drive Systems, November 2007, pp702-706.
http://dx.doi.org/10.1109/peds.2007.4487779

X.D.Xue, cheng K.W.E ,and Ho S.L., A Self-training Numerical Method to Calculate the Magnetic Characteristics for Switched reluctance Motor drives ,IEEE trans,Magn,vol.4,no2,mars 2004, ,pp 734-737.
http://dx.doi.org/10.1109/tmag.2004.824722

V. Ionita, E. Cazacu, Correction of Measured Magnetization curves using finite element method, IEEE Trans. on Magn, vol. 45, no. 3,. March 2009, pp.1174-1177.
http://dx.doi.org/10.1109/tmag.2009.2012673

H.Sahraoui et H.Zeroug et H.A.Toliyat ,Switched Reluctance Motor design using Neural-Network method with static finite-element simulation ,IEEEtransaction on magnetic, vol.43, no.12, December 2007.pp.4089-4095.
http://dx.doi.org/10.1109/tmag.2007.907990

D.N.Essah and S.D.Sudhoff , A basic function approach to the nonlinear average value modeling of switched reluctance machine,IEEE Trans.Energy convers,vol.21,no.1,pp60-68,mars 2006.
http://dx.doi.org/10.1109/tec.2005.845519

G. Bertotti, General properties of power loss in soft ferromagnetic materials, IEEE transactions on magnetic, Vol. 24, No. 1,1988 pp. 621-630.
http://dx.doi.org/10.1109/20.43994

Ahmad Darabi, Auxiliary Windings, Supplying the AVR of a Brushless Synchronous Generator, Proceedings of The Eighth International Conference on Electrical Machines and Systems, ICEMS 2005, China, Vol. I, pp. 81-85.
http://dx.doi.org/10.1109/icems.2005.202489

A.LimB.Rodrgues, F.Xiao , A Centroid-based approach to solve the Bandwidth Minimization Problem , proceedings of the 37th Hawaii International Conference on System Sciences, Jan5-8, 2004, pp.75-80.
http://dx.doi.org/10.1109/hicss.2004.1265221

Liu Shanshan, Zhao Zhengming , A non linear Analytical Model for Switched Reluctance motor , Proceedings of IEEE TENCON`02, pp 2034-2037.
http://dx.doi.org/10.1109/tencon.2002.1182741

Akhter, Hamid Ehsan et Sharma, Virendra K. et Chandra, Ambrish et Al-Haddad, Kamal., Modeling simulation and performance analysis of switched reluctance motor operating with optimum value of fixed turn-on and turn-off switching angles , In IEEE 34th Annual Power Electronics Specialists Conference (Acapulco, Mexico, June 1-19, 2003), pp. 397-402 .
http://dx.doi.org/10.1109/pesc.2003.1218325

Kim, Chong-Chul, Jin Hur ,Simulation of a Switched Reluctance Motors Using Matlab / M File, IECON 02 [Industrial Electronics Society, IEEE 2002 28th Annual Conference of the] , pp 1066-1071.
http://dx.doi.org/10.1109/iecon.2002.1185420

Sheth, N. K., and K. R. Rajagopal. ,Calculation of the Flux-Linkage characteristics of a Switched Reluctance Motor by Flux Tube Method., IEEE Transactions on Magnetics 41.10,October 2005,pp 4069-4071.
http://dx.doi.org/10.1109/tmag.2005.854865

Xavier Mininger ,Xavier Rain ,Mickaël Hilairet ,Guillaume Krebs , Claude Marchand ,Modeling of SRM vibrations for two current controls, Proceedings of Electrimacs , Cergy-Pontoise , France, September 2011.pp1-6.

Hannoun, H., M. Hilairet, and C. Marchand. ,Analytical Modeling of Switched Reluctance Machines Including Saturation, IEEE International Electric Machines and Drives Conference 1 ,May 2007, pp 564-568.
http://dx.doi.org/10.1109/iemdc.2007.382729

Seok-Myeong Jang., You, Dae-Joon, Young-Hee Han, and Jeong-Phil Lee. ,Analytical Design and Dynamic characteristics of Switched Reluctance Motor with Minimum Torque Ripple, International . Conference on Electrical Machines and Systems (October 2007).pp 1236-1239.

A. Vagati, A. Fratta, G. Franceschini, P.M. Rosso , AC motors for High performances drives: A comparison , IEEE TRANS IND APPL November 1995; 32(5), vol.1, pp725-733
http://dx.doi.org/10.1109/28.536885

M.E Zaim, K.Dakhouche,and M.Bouneckhla , Design for torque ripple reduction of a three phase SRM,IEEE
http://dx.doi.org/10.1109/20.996304

Trans. Magn., vol. 38, no. 2, pp. 1189–1192, Mar. 2002, pp. 1189–1192.
http://dx.doi.org/10.1109/20.996304

Xue, X.D. , Cheng, K.W.E. , Ho, S.L , Kwok, K.F. Trigonometry-Based Numerical Method to Compute Nonlinear Magnetic Characteristics in Switched Reluctance Motors ,Magnetics, IEEE Transactions on ,Volume:43 , Issue: 4 , April 2007.,pp 1845 – 1848.
http://dx.doi.org/10.1109/tmag.2007.892619

X. Rain, M. Hilairet, O. Bethoux, Comparative study of various current controllers for the switched reluctance machine ,IEEE Vehicle Power and Propulsion Conference VPPC, Lille, FR, September 2010, pp. 1-6.
http://dx.doi.org/10.1109/vppc.2010.5729145

Li, G.J. ; Ojeda, X. ; Hlioui, S. ; Hoang, E. Comparative study of Switched Reluctance Motors performances for two current distributions and excitation modes. Industrial Electronics, 2009. IECON '09. 35th Annual Conference of IEEE, pp 4047 – 4052.
http://dx.doi.org/10.1109/iecon.2009.5415318

M,Chouitek, B,Bekouche,N,Benouza, Startegiies d'Alimentation d'un Moteur a Reluctance variable, the International Conference On Electronics & Oil from theory to appication ICEO'11 in Kasdi Merbah University ,Ouargla Algeria March 1-2 ,2011.

M,Chouitek,B,Bekouche,N,Benouza, Etude Comparative de Commande Neuronale et Commande Floue de la Machine a Reluctance Variable,2nd International Conférence On Electronics & electrotechnic & automatic CIEEA'13 in ENP Oran Algeria november 26-27 ,2013.

Arbab, N., Karim, H., Torkaman, H., Afjei, E., New external rotor switched reluctance motor in comparison with conventional SRM, (2011) International Review of Electrical Engineering (IREE), 6 (2), pp. 679-684.

Calado, M.R.A., Mariano, S.J.P.S., Cabrita, C.M.P., Optimised design and analysis of a new linear switched reluctance actuator, (2010) International Review of Electrical Engineering (IREE), 5 (3), pp. 919-926.

Kumar, R., Gupta, R.A., Bishnoi, S.K., Converter topologies for switched reluctance motor drives, (2008) International Review of Electrical Engineering (IREE), 3 (2), pp. 289-299.

Becheikh, M., Bendiabdellah, A., Design and analysis of a switched reluctance motor using a coupled fem-bem approach, (2010) International Review of Electrical Engineering (IREE), 5 (2), pp. 508-513.

Aravind, C.V., Norhisam, M., Zare, M.R., Aris, I., Marhaban, M.H., Nirei, M., Analytical design of the double rotor switched reluctance motor with optimal pole arc values, (2012) International Review of Electrical Engineering (IREE), 7 (1), pp. 3314-3324.

Siadatan, A., Afjei, E., A new type of three-phase two layers 6 by 4 switched reluctance motor: Configuration, simulation and experimental results, (2012) International Review of Electrical Engineering (IREE), 7 (2), pp. 3787-3794.


Refbacks

  • There are currently no refbacks.


Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize