Email this article 
Inductance Saturation of the Induction Machine as a Function of Stator Voltage and Load with Steady State AC Magnetic Finite Element Solver
(*) Corresponding author
DOI's assignment:
the author of the article can submit here a request for assignment of a DOI number to this resource!
Cost of the service: euros 10,00 (for a DOI)
Abstract
Magnetization inductance and the stator and rotor leakage inductances of an induction machine are studied as a function of magnetization state and load by the Finite Element Method. With a constant stator supply frequency, the stator voltage amplitude and the slip are varied. The current and flux linkage vectors used in the analysis are constructed based on the phase currents and the flux linkages seen by the conductors in every operating point. The magnetization inductance significantly varies as a function of the magnetization state and load of the machine. The saturation of the stator leakage inductance is dominated by the stator flux amplitude, and the rotor leakage inductance saturation is dominated by the load.
Copyright © 2014 Praise Worthy Prize - All rights reserved.
Keywords
References
Terras, T., Hadjeri, S., Mezouar, A., Chikouche Mohamed, T., Robust speed control with rotor resistance estimation for induction motor, (2013) International Review on Modelling and Simulations (IREMOS), 6 (1), pp. 49-58.
Hachicha, M.R., Ghariani, M., Neji, R., Finite element observer for induction machine in electric vehicle power train, (2013) International Review of Electrical Engineering (IREE), 8 (6), pp. 1751-1758.
V. Ruuskanen, J. Nerg, M. Niemelä, J. Pyrhönen, H. Polinder, Effect of Radial Cooling Ducts on the Electromagnetic Performance of the Permanent Magnet Synchronous Generators With Double Radial Forced Air Cooling for Direct-Driven Wind Turbines, IEEE Transaction on Magnetics, vol 49, n. 6, Jun. 2013, pp. 2974–2981.
Online: http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6410034
D. Chatterjee, A simple leakage inductance identification technique for three-phase induction machines under variable flux condition, IEEE Transactions on Industrial Electronics, vol. 59 n. 11, Nov. 2012, pp. 4041–4048.
Online: http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6084741
L. Kalamen, P. Rafajdus, P. Sekerak, V. Hrabovcova, A novel method of magnetizing inductance investigation of self-excited induction generators, IEEE Transactions on Magnetics, vol. 48 n. 4, Apr. 2012, pp. 1657–1660.
Online: http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6172331
E. Levi, M. Sokola, S. Vukosavic, A method for magnetizing curve identification in rotor flux oriented induction machines, IEEE Transactions on Energy Conversion, vol. 15 n. 2, Jun. 2000, pp. 157–162.
Online: http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=866993
D. Chatterjee, A novel magnetizing-curve identification and computer storage technique for induction machines suitable for online application, IEEE Transactions on Industrial Electronics, vol. 58 n. 12, Dec. 2011, pp. 5336–5343.
Online: http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=5729817
A. Boglietti, A. Cavagnino, M. Lazzari, Computational algorithms for induction-motor equivalent circuit parameter determination – part i: Resistances and leakage reactances, IEEE Transactions on Industrial Electronics, vol. 58 n. 9, Sep. 2011, pp. 3723–3733.
Online: http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=5595498
A. Boglietti, A. Cavagnino, M. Lazzari, Computational algorithms for induction motor equivalent circuit parameter determination – part ii: Skin effect and magnetizing characteristics, IEEE Transactions on Industrial Electronics, vol. 58 n. 9, Sep. 2011, pp. 3734–3740.
Online: http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=5595499
A. Stankovic, E. Benedict, V. John, T. Lipo, A novel method for measuring induction machine magnetizing inductance, IEEE Transactions on Industry Applications, vol. 39 n. 5, Sep. 2003, pp. 1257–1263.
Online: http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=1233583
M. Ranta, M. Hinkkanen, J. Luomi, Inductance identification of an induction machine taking load-dependent saturation into account, The 18th International Conference on Electrical Machines ~ICEM 2008~, September, 2008, Vilamoura, Portugal.
M. Hinkkanen, A.-K. Repo, M. Ranta, J. Luomi, Small-signal modeling of mutual saturation in induction machines, IEEE Transactions on Industry Applications, vol. 46 n. 3, May 2010, pp. 965–973.
Online: http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=5439915
D. Dolinar, R. De Weerdt, R. Belmans, E. Freeman, Calculation of two-axis induction motor model parameters using finite elements, IEEE Transactions on Energy Conversion, vol. 12 n. 2, Jun. 1997, pp. 133–142.
Online: http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=629695
G. Dannerer, R. Seebacher, K. Krischan, R. Ingruber, Modeling the induction machine’s main inductance as a function of the magnetizing and the torque building component of the stator current, The 18th International Conference on Electrical Machines ~ICEM 2008~, September, 2008, Vilamoura, Portugal.
R. Seebacher, G. Dannerer, K. Krischan, R. Ingruber, Modeling the induction machine’s main inductance as a function of the supply frequency and the magnetizing and the torque building component of the stator current, The 13th European Conference on Power Electronics and Applications ~EPE 2009~, September, 2009, Barcelona, Spain.
J. Nerg, J. Pyrhönen, J. Partanen, Finite element modeling of the magnetizing inductance of an induction motor as a function of torque, IEEE Transactions on Magnetics, vol. 40 n. 4, Jul. 2004, pp. 2047–2049.
Online: http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=1325401
J. Nerg, J. Pyrhönen, J. Partanen, E. Ritchie, Induction motor mag netizing inductance modelling as a function of torque, The 16th International Conference on Electrical Machines ~ICEM 2004~, September, 2004, Cracow, Poland.
Refbacks
- There are currently no refbacks.
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize
