Design and Implementation of Non Isolated Bidirectional ZVS-PWM Active Clamped DC-DC Converter Fed DC Drive


(*) Corresponding author


Authors' affiliations


DOI's assignment:
the author of the article can submit here a request for assignment of a DOI number to this resource!
Cost of the service: euros 10,00 (for a DOI)

Abstract


A Bidirectional Non Isolated Soft Switching dc- dc converter fed dc drive will be proposed in this project. The converter can operate with soft switching, a continuous inductor current, fixed switching frequency and less voltage switching stress. Thus the conventional circuit having more voltage stress and losses. Active clamp circuit is used to reduce the voltage stress. This circuit has less switching loses due to soft switching. The bi-directional dc -dc converter modes of operation are explained .The circuit is simulated using MAT LAB.
Copyright © 2014 Praise Worthy Prize - All rights reserved.

Keywords


DC-DC Power Conversion; Power Electronics Switched Mode Power Supplies

Full Text:

PDF


References


M. Jain, M. Daniele, and P. K. Jain, “A bidirectional DC–DC converter topology for low power application,” IEEE Trans. Power Electron.,vol. 15, no. 4, pp. 595–606, Jul. 2000.

H. Li, F.-Z. Peng, and J. S. Lawler, “A natural ZVS Medium-power bidirectional DC–DC converter with Minimum number of devices,” IEEE Trans. Ind. Appl., vol. 39, no. 2, pp. 525–535, Mar. 2003.

P. Jose and N. Mohan, “A novel ZVS bidirectional Cuk converter for dual voltage systems in Automobiles,” in Proc. IEEE IECON Conf. Rec.2003

R. Li, A. Pottharst, N. Frohleke, and J. Bocker, “Analysis and design of improved isolated full-bridge Bidirectional DC–DC converter,” in Proc.IEEE PESC Conf. Rec., 2004, pp. 521–526.

E. Deschamps and I. Barbi, “A flying-capacitor ZVS 1.5 KW DC- DC converter with half of the input Voltage across the switches,” IEEE Trans.Power Electron. vol. 15, pp. 855–860, Sept. 2000.

K.Wang, C. Y. Lin, L. Zhu, D. Qu, F. C. Lee, and J.Lai, “Bi-directional DC - DC converters for fuel cell Systems,” in Conf. Rec. 1998 IEEE Workshop Power Electronics in Transportation, pp. 47–51.

R. W. De Doncker, D. M. Divan, and M. H. Kheraluwala, “A three phase soft- switched High power density dc/dc converter for high power Applications,” IEEE Trans. Ind. Applicant., vol. 27, pp. 63–73, Jan/ Feb.1991.

C. P. Henze, H. C. Martin, and D. W. Parsley, “Zero Voltage switching in high frequency power converters Using pulse width modulation,” in Proc. IEEE APEC Conf. Rec., 1988, pp. 33–40.

D. M. Sable and F. C. Lee, “A zero-voltage-switching Bidirectional battery charger/discharger for NASA EOS satellite,” in Proc. IEEE APEC Conf. Rec., 1992, pp. 614–621.

Z. R. Martinez and B. Ray, “Bidirectional DC/DC Power conversion using constant frequency multi-Resonant topology,” in Proc. IEEE APEC Conf. Rec., 1994, pp. 991–997.

C.E. Kim, S.-K. Han, K.-H. Yi, W.-J. Lee, and G.-W. Moon, “A new high efficiency ZVZCS Bi-Directional DC/DC converter for 42 V Power System of HEVs,” in Proc. IEEE PESC Conf. Rec., 2006, pp. 792–797.

K. T. Chau, T. W. Ching, and C. C. Chan, “Bidirectional soft-switching converter-fed DC Motor drives,” in Proc. IEEE PESC Conf. Rec., 1998, pp. 416–422.

C. Da Cunha Duarte and I. Barbi, “A new family of ZVS-PWM active- clamping DC-to-DC boost converters: Analysis, design, and experimen- tation,” IEEE Trans. Power Electron., vol. 12, no. 5, pp. 824–831, Sep. 1997.

Y. Jang, M. M. Jovanovich, and C.-C. Wen, “Design considerations and performance evaluation of a 3 kW, soft-switched boost converter with active snubber,” in Proc. IEEE INTELEC Conf. Rec., 1998, pp. 678–684.

H. M. Suryawanshi, M. R. Ramteke, K. L. Thakre, and V. B. Borghate, “Unity-power-factor operation of three-phase AC–DC soft-switched con- verter based on boost active clamp topology in modular approach,” IEEE Trans. Power Electron., vol. 23, no. 1, pp. 229–236, Jan. 2008.

Gatto, G., Cimino, V.I., Marongiu, I., Meo, S., Perfetto, A., Interleaved ZVS active-clamped bidirectional DC-DC converter for hybrid-electric vehicles, (2011) International Review of Electrical Engineering (IREE), 6 (5), pp. 2188-2197.

Isastia, V., Meo, S., A new ZVS-CV bridgeless PFC dual boost converter for pure electric vehicle battery charger, (2011) International Review of Electrical Engineering (IREE), 6 (3), pp. 1060-1069.

Esposito, F., Gentile, G., Isastia, V., Meo, S., A new bidirectional soft-switching multi-input DC-DC converter for automotive applications, (2010) International Review of Electrical Engineering (IREE), 5 (4), pp. 1336-1346.

Meo, S., Perfetto, A., Piegari, L., Esposito, F., A ZVS current fed dc/dc converter oriented for applications fuel-cell-based, (2004) IECON Proceedings (Industrial Electronics Conference), 1, art. no. TA7-71, pp. 932-937.


Refbacks

  • There are currently no refbacks.


Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize