Non-Iterative Optimization Algorithm Based D-STATCOM for Power Quality Enhancement


(*) Corresponding author


Authors' affiliations


DOI's assignment:
the author of the article can submit here a request for assignment of a DOI number to this resource!
Cost of the service: euros 10,00 (for a DOI)

Abstract


In this paper a single step calculation of Non-Iterative Optimization Algorithm for Distributed Static Compensator (D-STATCOM) is designed for the enhancement of power quality. Power Quality issues such as voltage sag, voltage swell and harmonics are being solved in this paper. By the estimation of the conductance factors and using the power demand to be constant and the limits for the harmonics as constraints in the algorithm is developed. The main objective of the proposed algorithm is to optimally determine the conductance factor to maximize the supply-side power factor based on conditions to predefined source current total harmonic distortion (THD) limits as inequality constraint and average power balance as equality constraint. The proposed algorithm optimally determines the conductance factors to maximize the supply-side power factor based on average power balance as equality constraint to compensate for voltage sag and swell. A single step calculation using conductance factor is done to obtain the reference using the proposed algorithm. The reference current generated by using the Non-Iterative Optimization Algorithm is used to control the voltage source converter of D-STATCOM for power quality enhancement.
Copyright © 2013 Praise Worthy Prize - All rights reserved.

Keywords


Distributed Static Compensator (D-STATCOM); Non-Iterative Optimization Algorithm Voltage Sag; Voltage Swell; Harmonics; Total Harmonic Distortion (THD)

Full Text:

PDF


References


W.Mack Grady and S.Santoso,”Understanding power system harmonics”, IEEE Power Eng. Rev., vol.21, no. 11, pp. 8-11,Nov. 2001.

S. M.-R. Rafiei, H. A. Toliyat, R. Ghazi, and T. Gopalarathnam, “An optimal and flexible control strategy for active filtering and power factor correction under non-sinusoidal line voltages,” IEEE Trans. Power Del., vol. 16, no. 2, pp. 297–305, Apr. 2001.

G. W. Chang and C. M. Yeh, “Optimisation-based strategy for shunt active power filter control under non-ideal supply voltages,” Proc. Inst. Elect. Eng.—Elect. Power Appl., vol. 152, no. 2, pp. 182–190, Mar. 4, 2005.

G. W. Chang, C.-M. Yeh, and W.-C. Chen, “Meeting IEEE-519 current harmonics and power factor constraints with a three-phase three-wire active power filter under distorted source voltages,” IEEE Trans. Power Del., vol. 21, no. 3, pp. 1648–1654, Jul. 2006.

G. W. Chang, “A new approach for optimal shunt active power filter control considering alternative performance indices,” IEEE Trans. Power Del., vol. 21, no. 1, pp. 406–413, Jan. 2006.

S. George and V. Agarwal, “A DSP based optimal algorithm for shunt active filter under non sinusoidal supply and unbalanced load conditions,” IEEE Trans. Power Electron., vol. 22, no. 2, pp. 593–601, Mar. 2007.

K. R. Uyyuru, M. K. Mishra, and A. Ghosh, “An optimization-based algorithm for shunt active filter under distorted supply voltages,” IEEE Trans. Power Electron., vol. 24, no. 5, pp. 1223–1232, May 2009.

Parag Kanjiya, Vinod Khadkikar, and Hatem H. Zeineldin ,“A Non iterative Optimized Algorithm for Shunt Active Power Filter Under Distorted and Unbalanced Supply Voltages”, IEEE Transactions on Industrial Electronics, vol. 60, no. 12, pp. 5376- 5390 December 2013.

Masdi, H., Mariun, N., Bashi, S.M., Mohamed, A., Voltage sag compensation in distribution system due to SLG fault using D-STATCOM, (2010) International Review of Electrical Engineering (IREE), 5 (6), pp. 2836-2845.

Salman, N., Mohamed, A., Shareef, H., Voltage sag mitigation by combining optimal network reconfiguration and DSTATCOM placement using Gravitational Search Algorithm, (2011) International Review of Electrical Engineering (IREE), 6 (5), pp. 2502-2512.

Perez, J., Cardenas, V., Alcala, J., Miranda, H., STATCOM based on cascade H-bridge converter for compensating reactive power and current harmonics simultaneously, (2012) International Review of Electrical Engineering (IREE), 7 (5), pp. 5779-5787.

Noroozian, R., A performance comparison of D-STATCOM and DC distribution system for unbalanced load compensation, (2012) International Review of Electrical Engineering (IREE), 7 (2), pp. 4194-4206.

IEEE Recommended Practices and Requirements for Harmonic Control in Electrical Power Systems, IEEE Std. 519-1992, 1993.

IEEE Standard Definitions for the Measurement of Electric Power Quantities under Sinusoidal, Nonsinusoidal, Balanced, or Unbalanced Conditions, IEEE Std. 1459-2010.

IEEE Recommended Practice for Monitoring Electric Power Quality, IEEE Std. 1159 – 2009.

Mohan Mathur and Rajiv Varma, Thyristor based FACTS Controllers for Electrical Transmission Systems”, Wiley, 2002.

Arindam Ghosh and Gerald Ledwich, Power Quality Enhancement Using Custom Power Devices, Kluwer Academic Publishers, 2002.


Refbacks

  • There are currently no refbacks.


Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize