| Issue | Title | |
| Vol 12, No 2 (2018) | Tensile and Flexural Performance of Polypropylene Based Oil Palm Fibre Reinforced Metal Laminates | Abstract |
| D. Sivakumar, F. Hussain, L. F. Ng, J. W. Chua, M. I. Dzulfakarudin | ||
| Vol 8, No 2 (2014) | Tensile Parameters Evaluation of Two Solid Solution Super Alloys by ANN Modeling | Abstract |
| Muhammad Hasibul Hasan, Muataz Hazza F. Al Hazza | ||
| Vol 11, No 11 (2017) | Test Methods of Increasing Precision Verification of Continuous Conveyor-Type Weighers | Abstract |
| Igor Alexander Galin | ||
| Vol 9, No 5 (2015) | The Analysis of the Relationship Among the Different Factors Influencing Welding Production by the Gephi Software | Abstract |
| Xiaochen Yang, Paul Kah | ||
| Vol 11, No 5 (2017) | The Architecture of the Control System for the Mobile Process Robot with Walking Movers | Abstract |
| Victor Victorovich Zhoga, Vladimir Nikolaevich Skakunov, Stanislav Evgenievich Terekhov, Victor Alexandrovich Belikov | ||
| Vol 7, No 6 (2013) | The Assessment of the in-Cylinder Pressure by Means of the Morpho-Dynamical Vibration Analysis - Methodology and Application | Abstract |
| A. Amoresano, V. Avagliano, V. Niola, G. Quaremba | ||
| Vol 17, No 6 (2023) | The Center of Pressure Velocity as a Discriminant of Static Alignment in Transtibial Prostheses | Abstract |
| Lely Adriana Luengas, Esperanza Camargo, Enrique Yamid Garzón G. | ||
| Vol 7, No 3 (2013) | The Control of the Handling of a Front Wheel Drive Vehicle by Means of a Magnetorheological Differential | Abstract |
| M. Terzo, F. Timpone | ||
| Vol 12, No 9 (2018) | The Development of Recommendations for Machinability of Ti-6Al-4V Titanium Alloys by Optimizing the Heat Treatment Modes | Abstract |
| Yuliia Borisovna Egorova, Liudmila Vasilevna Davydenko, Evgeniy Nikolaevich Egorov, Evgeniy Valeryevna Chibisova | ||
| Vol 12, No 3 (2018) | The Effect of Compressor Speed Variation and Vapor Injection on the Performance of Modified Refrigeration System | Abstract |
| Ahmed Jasim Hamad, Abdul Hadi N. Khalifa, Doaa Zaid Khalaf | ||
| Vol 15, No 12 (2021) | The Effect of Cooling and Temperature in 3D Printing Process with Fused Deposition Modelling Technology on the Mechanical Properties with Polylactic Acid Recycled Material | Abstract |
| Wilson Sutanto Tan, Yopi Yusuf Tanoto, Ninuk Jonoadji, Albertus Andrie Christian | ||
| Vol 11, No 8 (2017) | The Effect of Electromagnetic Stirring on the Speed of the Solidification Front | Abstract |
| Bachir Hamri, Saoudi Taibi | ||
| Vol 10, No 1 (2016) | The Effect of Orientation of Short Fibers in the Diluted Suspension for Thermoplastic | Abstract |
| I. Modhaffar, K. Gueraoui, S. Men-La-Yakhaf, H. El-Tourroug | ||
| Vol 7, No 7 (2013) | The Effect of Shear Rate and Temperature on Rheology Properties of Magnesium Metal Injection Molding Feedstock | Abstract |
| Z. Nooraizedfiza, H. Salmah, M. A. Omar | ||
| Vol 7, No 7 (2013) | The Effect of Sintering Duration on Mechanical Properties of Al/SiC Composites | Abstract |
| A. B. Sanuddin, M. S. Hussin, H. Azmi, Z. A. Zailani, M. F. M. A. Hamzas, V. Kartik | ||
| Vol 7, No 1 (2013) | The Effect of Sintering Temperature on Mechanical Properties of Al/SiC Composites | Abstract |
| A. B. Sanuddin, H. Azmi, M. S. Hussin, K. L. Chuan, Z. A. Zailani, M. F. M. A. Hamzas | ||
| Vol 11, No 11 (2017) | The Effect of Stress Amplitude and Ratio on Crack Growth Behaviour in Fibre Metal Laminate | Abstract |
| Anindito Purnowidodo, M. Chairul Anam, Dani T. Subekti | ||
| Vol 11, No 3 (2017) | The Effect of the Addition of Inlet Disturbance Body (IDB) to Flow Resistance Through the Square Cylinders Arranged in Tandem | Abstract |
| Nasaruddin Salam, Rustan Tarakka, Jalaluddin Jalaluddin, Reza Bachmid | ||
| Vol 17, No 4 (2023) | The Effect of Total Solids Content on Bioenergy Yield: an Experimental Study | Abstract |
| Siham Dehmani, Mohamed El Amine Dahou, Mounir Sakmeche, Abdelaziz Arroussi, Mohammed Hadj Kouider | ||
| Vol 14, No 2 (2020) | The Estimation of Main Parameters of the Power Plant and Electromechanical Powertrain for the Wheeled Vehicle | Abstract |
| Roman Yuryevich Dobretsov, Gennadii Pavlovich Porshnev, Aleksandr Georgievich Semenov, Dmitrii Vadimovich Bulakh, Kirill Anatolevich Bondar | ||
| Vol 7, No 4 (2013) | The Flight Performance Criteria for Adaptive Control Design During Hydro Planing and Ground Effect Altitude of Wing In Surface Effect-Craft | Abstract |
| Sayuti Syamsuar, E. B. Djatmiko, P. A. Wilson, - Erwandi, - Subchan | ||
| Vol 17, No 11 (2023) | The Impact of Stirring Model on Aluminum Alloys ADC12's Microstructure and Mechanical Properties | Abstract |
| Syaharuddin Rasyid, Ilyas Renreng, Hairul Arsyad, Muhammad Syahid | ||
| Vol 8, No 2 (2014) | The Impacts of Five Different Turbulence Models on the Accuracy of Computational Aeroacoustic Results for an Airfoil and Acoustic Localization Analysis for Well Suited Model | Abstract |
| Daniel Saatchi, Mani Fathali, Ali Rahmimi Khojasteh | ||
| Vol 8, No 4 (2014) | The Influence of Microstructure and Specimen Size Ratio on the Elastic Modulus of a Bar Element | Abstract |
| Olufemi T. Akintayo | ||
| Vol 8, No 5 (2014) | The Influence of Reverse Logistics on Reclaiming – A Case of Recycling Used Truck Tires | Abstract |
| B. Manoj Kumar, R. Saravanan | ||
| 1051 - 1075 of 1149 Items | << < 38 39 40 41 42 43 44 45 46 > >> | |
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize