Issue | Title | |
Vol 13, No 3 (2019) | Study of Turbulent Flow through a Thrust Reverser | Abstract |
Rayane Dellali, Mahfoud Kadja | ||
Vol 9, No 3 (2015) | Study on Optimizing the Best Additives to be Added to Vegetable Based Lubricant to Improve Machinability Performance | Abstract |
Mohd Radzi Mohd Hafiezal, Siti Aishah Adam, A. F. Mansor, A. S. S. Zairi, Y. W. Norsyahadah, Lee Teen Yang | ||
Vol 13, No 4 (2019) | Study on Solar Air Collector with Perforated Strips in the Baffles | Abstract |
Mustapha Henaoui, Khaled Aliane | ||
Vol 7, No 5 (2013) | Study on the Heat Transfer of the Rectangular Fin with Dehumidification: Temperature Distribution and Fin Efficiency | Abstract |
Abdenour Bourabaa, Mohamed Saighi, Malika Fekih, Brahim Belal | ||
Vol 11, No 6 (2017) | Study on Vibrations in Centrifugal Pump Due to Dynamic Loading | Abstract |
Ravindra S. Birajdar, A. A. Keste | ||
Vol 9, No 3 (2015) | Supervision and Control Architecture for CNC Machine TOOL Using Rapid Prototyping | Abstract |
João Mauricio Rosario, Daniel Kubiak, Edgard Oliveira, Almiro Franco Silveira, Leonimer F. Melo | ||
Vol 8, No 6 (2014) | Surface Modification of Mild Steel with Molybdenum Disulfide by Tungsten Inert Gas | Abstract |
Rohit Kaushik, Shubham Gupta, S. Sivarajan | ||
Vol 8, No 2 (2014) | Surface Roughness Modeling in High Speed Hard Turning Using Regression Analysis | Abstract |
Muataz Hazza F. Al Hazza, Erry Yulian T Adesta, Muhammad Hasibul Hasan, Norhashimah Shaffiar | ||
Vol 10, No 4 (2016) | Suspension Kinematic Analysis of UTeM’s FV Malaysia Electric Vehicle Racing Car | Abstract |
Muhammad Zaidan Abdul Manaf, Mohd Faruq Abdul Latif, Mohd Suffian Ab Razak, Muhammad Zahir Hassan, Mohd Idain Fahmy Rosley | ||
Vol 7, No 2 (2013) | Swirl Analysis in Round Tubes with Partially Short Length Twisted Tapes with Turbulent Flow | Abstract |
R. J. Yadav, A. S. Padalkar | ||
Vol 9, No 6 (2015) | Synchronization of Chaotic Systems with Uncertain Time-Varying Parameters | Abstract |
Ahmad Al-Jarrah, Mohammad Ababneh, Suleiman Bani Hani, Khalid Al-Widyan | ||
Vol 11, No 8 (2017) | Synthesis and Characterization of a Novel Mg-Zn-Zr-Cu Alloy by Powder Metallurgy Technique | Abstract |
E. Suneesh, M. Sivapragash | ||
Vol 13, No 8 (2019) | Synthesis and Characterization of Monometallic Cobalt Catalyst Supported on Kaolin for the Production of Carbon Nanotubes | Abstract |
Rasaq O. Medupin, Kingsley O. Ukoba, Ambali S. Abdulkareem, Oladiran K. Abubakre, Tien-Chien Jen | ||
Vol 11, No 4 (2017) | Systemic Analysis of the Adoption of Electric Vehicle Technologies in Colombia | Abstract |
Milton Herrera, Javier Rosero Garcia, Oscar Casas | ||
Vol 8, No 1 (2014) | Taguchi Approach for the Optimization of Process Parameters of Wear in AISI 202 Tested at Elevated Temperature | Abstract |
K. Arul Raj, M. Karthikeyan, R. Mariappan, S. Sakthisubaraja, A. S. Akilan | ||
Vol 11, No 9 (2017) | Taguchi Based Grey Relational Analysis Methodology for Semi Active Suspension System Using MR Damper | Abstract |
R. N. Yerrawar, R. R. Arakerimath | ||
Vol 7, No 7 (2013) | Taguchi-Fuzzy Inference System for Prediction in Precision Turning of Ti-6Al-4V | Abstract |
R. Vinayagamoorthy, Md. Aslam, K. Vamsi Krishna, M. Anthony Xavior | ||
Vol 13, No 4 (2019) | Technical Development Trends Review of Futuristic Personal Air Vehicle Applications | Abstract |
Jun Hwan Jang, Sang Ho Ahn | ||
Vol 17, No 8 (2023) | Techno-Economic Evaluation of Solar Water Heating Systems for Sustainable Tourism in Selected Cities in Fiji | Abstract |
Olanrewaju Miracle Oyewola, Malik O. Olasinde, Patrick M. Singh, Olusegun O. Ajide, Olawale S. Ismail | ||
Vol 12, No 2 (2018) | Tensile and Flexural Performance of Polypropylene Based Oil Palm Fibre Reinforced Metal Laminates | Abstract |
D. Sivakumar, F. Hussain, L. F. Ng, J. W. Chua, M. I. Dzulfakarudin | ||
Vol 8, No 2 (2014) | Tensile Parameters Evaluation of Two Solid Solution Super Alloys by ANN Modeling | Abstract |
Muhammad Hasibul Hasan, Muataz Hazza F. Al Hazza | ||
Vol 11, No 11 (2017) | Test Methods of Increasing Precision Verification of Continuous Conveyor-Type Weighers | Abstract |
Igor Alexander Galin | ||
Vol 9, No 5 (2015) | The Analysis of the Relationship Among the Different Factors Influencing Welding Production by the Gephi Software | Abstract |
Xiaochen Yang, Paul Kah | ||
Vol 11, No 5 (2017) | The Architecture of the Control System for the Mobile Process Robot with Walking Movers | Abstract |
Victor Victorovich Zhoga, Vladimir Nikolaevich Skakunov, Stanislav Evgenievich Terekhov, Victor Alexandrovich Belikov | ||
Vol 7, No 6 (2013) | The Assessment of the in-Cylinder Pressure by Means of the Morpho-Dynamical Vibration Analysis - Methodology and Application | Abstract |
A. Amoresano, V. Avagliano, V. Niola, G. Quaremba | ||
1026 - 1050 of 1143 Items | << < 37 38 39 40 41 42 43 44 45 46 > >> |
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize