| Issue | Title | |
| Vol 15, No 5 (2021) | Optimization of Machining Parameters in Hard Turning of Automotive Gears with PCBN tool using Taguchi Method | Abstract |
| Debabrata Samantaraya, Sanjay Lakade | ||
| Vol 13, No 1 (2019) | Optimization of Pilot Diesel Injection Timing on Load Variation Dual Fuel Diesel-CNG Engine on Combustions and Emissions Characteristics | Abstract |
| Bambang Sudarmanta, Atok Setiyawan, Ary Bachtiar K. Putra, Dori Yuvenda, Jose da Silva | ||
| Vol 8, No 2 (2014) | Optimization of Process Parameters of Robotic GMAW of IS 2062 E250 BR Using Taguchi Techniques | Abstract |
| P. Thamilarasi, S. Ragunathan, E. Mohankumar | ||
| Vol 8, No 3 (2014) | Optimization of Process Parameters of Robotic GMAW of IS 2062 E250 BR Using Taguchi Techniques | Abstract |
| P. Thamilarasi, S. Ragunathan, E. Mohankumar | ||
| Vol 7, No 2 (2013) | Optimization of Rectangular Microchannel Depth Under Forced Convection Heat Transfer Condition | Abstract |
| B. S. Gawali, D. A. Kamble | ||
| Vol 11, No 3 (2017) | Optimization of Shear Wave Velocity (Vs) from a Post-Liquefaction Settlement Using a Genetic Algorithm Multi-Objective NSGA II | Abstract |
| Kamel Goudjil, Badreddine Sbartai | ||
| Vol 8, No 4 (2014) | Optimization of Sheet Metal Parts Nesting Using Genetic Algorithm | Abstract |
| K. Ramesh, N. Baskar, A. Pandianathan | ||
| Vol 7, No 3 (2013) | Optimization of Surface Roughness in Wet Turning Operation of High Carbon High Chromium Steel | Abstract |
| Rahul Davis, Mohamed Alazhari, Abdurahman HA Zubir | ||
| Vol 16, No 11 (2022) | Optimization of the Gearbox Volume with a Specific Matlab GUI Program | Abstract |
| Ali Emran Yazdani, Soroush Abyaneh | ||
| Vol 7, No 3 (2013) | Optimization of the Plastic Injection Molding Parameters for Sport Equipment by Using Design of Experiment | Abstract |
| R. Hussin, R. Mohd Saad, R. Hussin, M. R. M. Hafiezal, M. A. Fairuz | ||
| Vol 7, No 4 (2013) | Optimization of the Plastic Injection Molding Parameters for Sport Equipment by Using Design of Experiment | Abstract |
| R. Hussin, R. Mohd Saad, R. Hussin, M. R. M. Hafiezal, M. A. Fairuz | ||
| Vol 17, No 5 (2023) | Optimization of Two-Side Door Beams Under Bending Load | Abstract |
| Fauzan Djamaluddin, Dony Hidayat, Fajar Ari Wandono, Riki Ardiansyah | ||
| Vol 7, No 1 (2013) | Optimization of Wire Electrical Discharge Machining of Hybrid Metal Matrix Composite Material | Abstract |
| S. Ramesh, N. Natarajan | ||
| Vol 7, No 3 (2013) | Optimization of Wire-Winding and Shrink-Fit Combination in Pressure Vessel Reinforcement | Abstract |
| A. H. Jabbari, M. Sedighi, A. M. Razeghi | ||
| Vol 15, No 6 (2021) | Optimization Study of Electric Regenerative Shock Absorber (ERSA) Using Taguchi Method | Abstract |
| Wanda Afnison, Erzeddin Alwi, Bahrul Amin, Hasan Maksum, Wawan Purwanto, Fitrah Kurniawan | ||
| Vol 16, No 12 (2022) | Optimizations of Multi Optima Problems Using the Genetic Algorithm, Punch-Out Method, and Least Exponent Method | Abstract |
| Hyun-Wook Kwon, Seongsu Kim | ||
| Vol 13, No 3 (2019) | Optimized Modeling of Flexible Beam Structure with Pole-Zero Estimation | Abstract |
| Rickey Pek Eek Ting, Intan Zaurah Mat Darus, Shafishuhaza Sahlan, Mat Hussin Ab Talib | ||
| Vol 7, No 3 (2013) | Optimizing the Compression Ratio of C.I Engine Fuelled in Sardine Oil Ethyl Ester | Abstract |
| V. Narasiman, S. Jeyakumar, M. Mani | ||
| Vol 16, No 3 (2022) | Optimizing the Modified Whitworth Quick Return Mechanism Using Taguchi and ANOVA Methods | Abstract |
| Hussein Mohammed Hussein Al-Khafaji, Nabil N. Swadi, Auday Shaker Hadi | ||
| Vol 18, No 1 (2024) | Optimizing the Punch Parameters for V-Bending Stainless Steel Using Response Surface Methodology Approach | Abstract |
| Rusdi Nur, Muhammad Arsyad Suyuti, Muhammad Iswar, Muhammad Ruswandi Djalal | ||
| Vol 10, No 4 (2016) | Optimum Blank Shape for Cylindrical Cup from SUS304 in Deep Drawing Process by Finite Element Method | Abstract |
| Boonsong Ritta, Sampan Rittidech, Bopit Bubphachot | ||
| Vol 14, No 6 (2020) | Optimum Values Regular Structure Converters for Converting the Vibration into Electric Energy | Abstract |
| Zhandos Serikuly, Alexander Anatolievich Volnenko, Serik Arginbaevich Kumisbekov | ||
| Vol 7, No 1 (2013) | Orthogonal Least Squares Method and its Application to Nonlinear Modeling of Automotive Engine Fuelled with Palm Oil Methyl Esters | Abstract |
| Azuwir Mohdnor, M. Z. Abdulmuin, A. H. Adom | ||
| Vol 11, No 1 (2017) | Parametric Beam Modeling to Predict the First Natural Bending Frequency of Thin Wall Box-Shaped Structures Verified Using Experimental Modal Analysis | Abstract |
| Oegik Soegihardjo, Suhardjono Suhardjono, Bambang Pramujati, Agus Sigit Pramono | ||
| Vol 13, No 5 (2019) | Parametric Optimization of CNC Turning on LM25 Aluminum Alloy Using Taguchi Based Grey Relational Analysis | Abstract |
| S. Dhanalakshmi, T. Ramesh Babu | ||
| 851 - 875 of 1149 Items | << < 30 31 32 33 34 35 36 37 38 39 > >> | |
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize