| Issue | Title | |
| Vol 14, No 11 (2020) | Numerical Study of Effect of Backlash on Flash Temperature of Spur Gear | Abstract |
| Getachew A. Ambaye, Hirpa G. Lemu | ||
| Vol 9, No 2 (2015) | Numerical Study of Effects of Piston Bowl Geometry on the Intake Generated Swirl in a PCCI Engine | Abstract |
| V. Venkatesan, James Gunasekaran E. | ||
| Vol 13, No 4 (2019) | Numerical Study of H-Darrieus Wind Turbine Start-Up by Six Degrees of Freedom Model | Abstract |
| Nasreddine Akermi, Azzerdine Khorsi, Omar Imine | ||
| Vol 7, No 5 (2013) | Numerical Study of Ice Melting Inside a Rectangular Cavity and a Horizontal Cylinder Including Convective Effects | Abstract |
| Christiano G. S. Santim, Luiz Fernando Milanez | ||
| Vol 10, No 3 (2016) | Numerical Study of Natural Convection-Surface Radiation Coupling in Air-Filled Square Cavity Using the Gauss’s Theorem on Triangular Meshes | Abstract |
| Djelloul Becheri, Abdellah Belkacem | ||
| Vol 10, No 3 (2016) | Numerical Study of Natural Convection-Surface Radiation Coupling in Air-Filled Square Cavity with Curved Wall Using the Gauss’s Theorem on Triangular Meshes | Abstract |
| Djelloul Becheri, Abdellah Belkacem | ||
| Vol 7, No 6 (2013) | Numerical Study of the Effect of Interrupted Fins on the Effectiveness of Cross-Flow Heat Exchanger | Abstract |
| Hassene Djemel, Mounir Baccar, Mohamed Mseddi | ||
| Vol 10, No 4 (2016) | Numerical Study of the Roughness Influence on NACA 63-430 Profile Aerodynamic Performance | Abstract |
| Abdelkrim Tebbal, Fethi Saidi, Boualem Noureddine, Bachir Imine, Benameur Hamoudi | ||
| Vol 11, No 11 (2017) | Numerical Study of the Thermal Efficiency of Buildings Built by Earth Blocks Stabilized by Cement | Abstract |
| M. Belcadi, Kamal Gueraoui, H. Bensalah | ||
| Vol 7, No 2 (2013) | Numerical Study of Turbulent Heat Transfer in Separated Flow: Review | Abstract |
| Hussein Togun, Tuqa Abdulrazzaq, S. N. Kazi, Abdul Amir H. Kadhum, Ahmed Badarudin, M. K. A. Ariffin, Emad Sadeghinezhad | ||
| Vol 16, No 3 (2022) | Numerical Study on Cavitation Phenomenon in an In-Line Centrifugal Pump | Abstract |
| Md Rakibuzzaman, Sang-Ho Suh, A. K. M. Parvez Iqbal, Hyoung-Ho Kim | ||
| Vol 8, No 5 (2014) | Numerical Study on Fluid Flow Characteristics Over the Side-By-Side Square Cylinders at Different Spacing Ratios | Abstract |
| Karauppasamy Karthik Selva Kumar, L. A. Kumaraswamidhas | ||
| Vol 12, No 3 (2018) | On a Time Series Analysis Generated by a Sensor of an Atomic Force Microscope (AFM) | Abstract |
| Ricardo Nozaki, Hélio Aparecido Navarro, Angelo Marcelo Tusset, Rodrigo Tumolin Rocha, Marcelo A. Pereira da Silva, Jose Manoel Balthazar | ||
| Vol 8, No 6 (2014) | On Influence of the Shape of the Displacement Field for Studying the Vibration Behaviour of a Sandwich Beam | Abstract |
| Youssef Abdelli, R. Nasri | ||
| Vol 8, No 1 (2014) | On Real Time Prediction of Cutting Forces Using ANN | Abstract |
| Hany A. El Kadi, Ibrahim M. Deiab, Amal A. Khattab | ||
| Vol 11, No 5 (2017) | On the Possibility of Producing Defect-Free Welds Under Acoustic Emission Monitoring | Abstract |
| Victor Petrovich Gomera, Evgeny Nefedyev, Anatoly Smirnov | ||
| Vol 14, No 6 (2020) | Operating Properties of Tools Manufactured on 3d Printers Used in the Manufacture of Construction Materials | Abstract |
| Jaroslaw Kotlinski | ||
| Vol 7, No 5 (2013) | Optimal Solution for Gear Drive Design Using Population Based Algorithm | Abstract |
| S. Padmanabhan, M. Chandrasekaran, P. Asokan, Raman V. Srinivasa | ||
| Vol 12, No 12 (2018) | Optimal Synthesis of a Theo Jansen Mechanism | Abstract |
| Neider Nadid Romero-Nunez, Gonzalo Guillermo Moreno Contreras, Elkin Gregorio Florez Serrano, Cesar Augusto Peña Cortes | ||
| Vol 7, No 6 (2013) | Optimization of a Refrigerant Base Nanofluid-Cooled Microchannel Heat Sink with Pumping Power Consideration | Abstract |
| Ahmed M. Adham | ||
| Vol 11, No 6 (2017) | Optimization of CI Engine Vibration Characteristics Operated on Jatropha Methyl Ester Using Taguchi and Multiple Regression Analysis | Abstract |
| Nitin D. Gadhave, Shravan H. Gawande | ||
| Vol 11, No 10 (2017) | Optimization of Design Parameters of Bellows Using Taguchi Method | Abstract |
| S. K. Makke, A. A. Keste, Shravan H. Gawande | ||
| Vol 12, No 8 (2018) | Optimization of Design Parameters of Dust Collectors with Counter-Current Swirling Flows in the Systems of Dedusting Ventilation | Abstract |
| V. N. Azarov, I. V. Stefanenko, D. P. Borovkov, Ostaali Majd | ||
| Vol 7, No 7 (2013) | Optimization of Ferrite Number of Solution Annealed Duplex Stainless Steel Claddings Using Integrated Artificial Neural Network – Genetic Algorithm | Abstract |
| V. Rathinam, T. Kannan | ||
| Vol 9, No 2 (2015) | Optimization of Machining Parameters in AWJM Process for Lead Tin Alloy Using RSM and Regression Analysis | Abstract |
| K. S. Jai Aultrin, M Dev Anand | ||
| 826 - 850 of 1149 Items | << < 29 30 31 32 33 34 35 36 37 38 > >> | |
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize