Issue | Title | |
Vol 17, No 12 (2023) | Modal and Harmonic Response Analysis of INSEAN E779A Marine Propeller Under Hydrodynamic Loading | Abstract |
Yamina Aouimer, Djilali Boutchicha | ||
Vol 8, No 3 (2014) | Mode I Stress Intensity Factors for Slanted Cracks in Round Bars | Abstract |
A.E Ismail | ||
Vol 12, No 1 (2018) | Model and Simulation of Thermal Cracking for a Heavy Crude Oil Stream in Oil Refining | Abstract |
Jorge Buitrago, Dario Amaya, Olga Ramos | ||
Vol 7, No 2 (2013) | Model-Based Approach for Investigation of Ladle Lining Damages | Abstract |
Emil G. Mihailov, Venko I. Petkov, Ivan V. Doichev, Kosta P. Boshnakov | ||
Vol 12, No 6 (2018) | Modeling & Control of a Variable Velocity Wind Turbine Connected to a Doubly Fed Induction Generator (DFIG) | Abstract |
Badr Benyachou, Bennasser Bahrar, Kamal Gueraoui | ||
Vol 12, No 8 (2018) | Modeling a Fuel Cell Hybrid Vehicle | Abstract |
Taoufik Ghabara, F. Tiss, R. Chouikh, A. Guizani | ||
Vol 9, No 1 (2015) | Modeling and Analysis of the Performance of a Parabolic Trough Solar Concentrator | Abstract |
Abed Alrzaq S. Alshqirate, Mahmoud Hammad, Alaa M. Al-Qteimat | ||
Vol 14, No 8 (2020) | Modeling and Computational Simulation of Cable Pulling Winch Machine | Abstract |
Kesar Mal Kothari, Udayakumar Rajamanickam, Ram Karthikeyan, Vishweshwar Samba | ||
Vol 9, No 4 (2015) | Modeling and Development of Cooling Technology of Turbine Engine Blades | Abstract |
Vladislav N. Kovalnogov, Ruslan V. Fedorov, Dmitry A. Generalov | ||
Vol 9, No 3 (2015) | Modeling and Identification of a Four-Bar Linkage Mechanism Driven by a Geared DC Motor | Abstract |
Tarek A. Tutunji, Mohammad Salah, Ahmad Jarrah, Anas Ahmad, Rabei Alhamdan | ||
Vol 14, No 1 (2020) | Modeling and Implementation of a Proportional Hydraulic System to Control the Position and Pressure of a Plastic Extruder | Abstract |
Wilson Edmundo Sánchez Ocaña, Viviana Belen Muñoz Cueva, Jonathan Arturo Rivera Flores | ||
Vol 11, No 9 (2017) | Modeling and Numerical Simulation of the Motion of a Solid Particle in a Fluid Flow | Abstract |
H. Benbih, Kamal Gueraoui, M. Driouich, M. Taibi, M. Saidi Hassani Alaoui | ||
Vol 13, No 4 (2019) | Modeling and Research of Gas Transportation Unit Operation Modes | Abstract |
Nurlan Batayev, Talgat Shuvatov, Aidar Kuzyrgaliyev, Rustam Krikbayev | ||
Vol 12, No 7 (2018) | Modeling Different Nanofluid Particles and Underground EAHE System to Decrease the Power Transformer Temperature | Abstract |
Rafid M. Hannun, Salman H. Hammadi, Mohammed H. Khalaf | ||
Vol 15, No 4 (2021) | Modeling Injector Fuel Spray Dynamics for Soot Reduction in Heavy Duty Diesel Engine | Abstract |
Rizwan Latif, Syed Adnan Qasim, Muzaffar Ali | ||
Vol 7, No 1 (2013) | Modeling of a Natural Convection Flow Plume-Thermosiphon Interaction | Abstract |
Z. Yahya, Ch. Mbow, A. O. M. Mahmoud, M. L. Sow | ||
Vol 16, No 4 (2022) | Modeling of a Storage System Integrated into a Hybrid System (PV/H2/PEMFC) | Abstract |
Taoufik Ghabara | ||
Vol 7, No 5 (2013) | Modeling of Dynamic Response of Beam-Type Vibration Absorbing System Excited by a Moving Mass | Abstract |
Azma Putra, Mothanna Y. Abd, Nawal A. A. Jalil, Sidik Susilo | ||
Vol 12, No 2 (2018) | Modeling the Dynamic Load of Loader Cranes Metal Structure with Excessive Backlashes in Sections Hinge Joints | Abstract |
Alexander V. Lagerev, Igor A. Lagerev | ||
Vol 9, No 3 (2015) | Modeling the Effect of Boundary Conditions on the Stability of Multilayer Composite Structures: Case of Buckling Bifurcation. Analytical and Numerical Results Using “SHELL 181” Element | Abstract |
Mohammed El Youbi, Mohamed Rougui | ||
Vol 7, No 7 (2013) | Modeling the Electrical Parameters in EDM Process of Ti6Al4V Alloy Using Neural Network Method | Abstract |
Muataz Hazza F. Al Hazza, Mohammed Baba Ndaliman, Muhammad H. Hasan, Mohammad Yeakub Ali, Ahsan Ali Khan | ||
Vol 15, No 8 (2021) | Modeling Two-Phase Water Hammer Flow Using Shock-Capturing Scheme | Abstract |
Mohamed Ouzi, Bennasser Bahrar, Mohamed Tamani | ||
Vol 8, No 1 (2014) | Modeling Vaporous Cavitation in Transient Pipe Flow Using the Zielke’s Friction Model | Abstract |
M. Tamani, B. Bahrar, K. Gueraoui | ||
Vol 7, No 3 (2013) | Modelling and Control Design of a Magnetorheological Fluid Brake | Abstract |
Riccardo Russo, Mario Terzo | ||
Vol 7, No 1 (2013) | Modelling and Experimentation of Heat Exchanges in a Building with Double Envelope and Straws Bullets | Abstract |
M. Tabarki, S. Ben Mabrouk | ||
701 - 725 of 1143 Items | << < 24 25 26 27 28 29 30 31 32 33 > >> |
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize