| Issue | Title | |
| Vol 11, No 2 (2017) | MATLAB Simulation and Validation of Fluid Properties in the Cross Flow Wet Cooling Tower | Abstract |
| Nandkumar Annarao Rawabawale, Shivalingappa Nagappa Sapali | ||
| Vol 15, No 12 (2021) | Mechanical Behavior of Laser Engraved Single Lap Joints Adhered by Polymeric Material | Abstract |
| Ayad Abid Muhmmed, Mohammed Khazal Hussain, Ahmed Rahman Khudadad, Hassan Hamoodi Mahdi, Mohanad Kadhim Mejbel | ||
| Vol 12, No 2 (2018) | Mechanical Behavior of Sandwich Materials Under Concentrated Loads | Abstract |
| Kaja Sofie Lamvik, Dimitrios G. Pavlou | ||
| Vol 16, No 8 (2022) | Mechanical Performance of Reinforced PMMA-Based Composites for Denture Materials: a Review | Abstract |
| Purnomo Purnomo, Dwi Windu Kinanti Arti, Ana Hidayati Mukaromah | ||
| Vol 14, No 4 (2020) | Mechanical Properties of Friction Stir Welding Joining of PolyTetraFluoroEthylene | Abstract |
| Mulyanto Mulyanto, Sulardjaka Sulardjaka | ||
| Vol 12, No 6 (2018) | Mechanical Response of Short Fiber Reinforced Fly Ash Based Geopolymer Composites | Abstract |
| Antonio Formisano, Barbara Galzerano, Massimo Durante, Ottavio Marino, Barbara Liguori | ||
| Vol 14, No 2 (2020) | Mechanical Stepless Self-Regulating Transmission for Vehicles | Abstract |
| Sergey Ivanovich Hoodorozhkov, Aleksandr Vladimirovich Kozlenok | ||
| Vol 12, No 6 (2018) | Mechanical, Thermophysical and Aerothermochemical Processes at Forest Fuel Ignition Caused by the Heated to High Temperatures Single Metal Particle | Abstract |
| Nikolay Baranovskiy, Arkadiy Zakharevich | ||
| Vol 11, No 5 (2017) | Mechanics of Loading and Deforming of Thin-Sheet Blank at Electro-Hydraulic Forming | Abstract |
| Viacheslav S. Mamutov, Gennady N. Zdor | ||
| Vol 12, No 5 (2018) | Mechanism of Quasi-Cleavage Destruction of Titanium Alloys | Abstract |
| Vladimir Zhukov | ||
| Vol 7, No 3 (2013) | Mechanisms for Renewable Ocean Energy Conversion | Abstract |
| Diamantino Durão, Leão Rodrigues | ||
| Vol 12, No 5 (2018) | Mechatronic Device for Brick Walls Laying | Abstract |
| Arkadii N. Popov, Mikhail N. Polishchuck, Arkadii B. Smirnov | ||
| Vol 14, No 3 (2020) | Method and Technology for Continuous Control of Performance and Operating Quality of Automotive and Combine Machinery | Abstract |
| Ildar Gabitov, Samat Insafuddinov, Ildar Badretdinov, Viktor Pavlenko, Filyus Safin | ||
| Vol 14, No 2 (2020) | Method for Reproducing Shock Acceleration in Mechanical Testing | Abstract |
| Arkadii N. Popov, Mikhail N. Polishchuck, Alexey K. Vasiliev | ||
| Vol 14, No 12 (2020) | Methodology for Detecting Faults in Injection Systems of Low-Displacement Diesel Engines by Diagnosing the Vibration Signal | Abstract |
| Sofia Orjuela Abril, Jhon Antuny Pabón, Jhan Piero Rojas | ||
| Vol 15, No 3 (2021) | Methodology for Selection and Analysis of Representative Test Roads Required for Vehicle Durability Evaluation | Abstract |
| Prashant Pawar, Arun Tom Mathew | ||
| Vol 16, No 1 (2022) | Methodology for the Static and Total Pressure Sensor Development Based on Elastic Sensing Elements and Linear CCD Matrices | Abstract |
| Ruslan Borisov, Ivan Antonec, Aleksandr Krotov, Sergey Tarasov, Vjaceslavs Bobrovs | ||
| Vol 11, No 5 (2017) | Methods for Evaluation Structural Anisotropy of Asphalt | Abstract |
| Alexander Andreevich Shestopalov, Andrei Vladimirovich Boitsev | ||
| Vol 8, No 4 (2014) | MHD Forced Convection Boundary Layer Slip Flow in Darcy-Forchheimer Porous Medium with Effects of Chemical Reaction | Abstract |
| Shahirah Abu Bakar, Norihan Md Arifin, Fadzilah Md Ali, Roslinda Nazar | ||
| Vol 7, No 6 (2013) | Microstructure and Dry Sliding Wear Behavior of AA2218 Based Self-Lubricating Metal Matrix Composites | Abstract |
| A. Anandha Moorthy, N. Natarajan, P. K. Palani, M. Manojkumar | ||
| Vol 16, No 6 (2022) | Microstructure and Microhardness Investigation of Non-Weldable AA7075-T651 Alloy with Gas Tungsten Arc Welding | Abstract |
| Vikas Pralhad Dive, Sanjay Lakade | ||
| Vol 8, No 1 (2014) | MILD Combustion: the Future for Lean and Clean Combustion Technology | Abstract |
| M. M. Noor, Andrew P. Wandel, Talal Yusaf | ||
| Vol 8, No 6 (2014) | Minimization on Warpage Defect in Injection Molding Part of ABS (Acrylonitrile Butadiene Styrene) Material by Using Design of Experiment (DOE) | Abstract |
| H. Radhwan, A. N. M. Khalil, M. F. M. A. Hamzas | ||
| Vol 8, No 3 (2014) | Minimizing Total Flow Time in Permutation Flowshop Scheduling by Two-Phase Approach | Abstract |
| Balasundaram Rathinam, D. Valavan, N. Baskar | ||
| Vol 15, No 1 (2021) | Mixed Finite Element for the Analysis of FGM Beams | Abstract |
| Haroune Benmalek, Salah Bouziane, Hamoudi Bouzerd | ||
| 676 - 700 of 1149 Items | << < 23 24 25 26 27 28 29 30 31 32 > >> | |
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize