| Issue | Title | |
| Vol 14, No 3 (2020) | Experimental Evolution of Curvature with Substrate and Alumina Thicknesses on Aluminum Anodizing | Abstract |
| Zoubai Elhadi, A. Raid, V. Fridrici, P. Christophe, N. Boualem, Ph. Kapsa | ||
| Vol 8, No 3 (2014) | Experimental Flow Analysis of a Pool-Type Fishway Using Velocity Fields from Reduced Model and Prototype | Abstract |
| Edna Maria F. Viana, Marco Tulio C. Faria, Carlos Barreira Martinez | ||
| Vol 8, No 6 (2014) | Experimental Investigation of a Two-Phase (Air-Water) Flow in a Pipe with Street Canyon Cavities | Abstract |
| Dimitra A. Zoga, Dimitrios S. Georgakis-Gavrilis, Dionissios P. Margaris | ||
| Vol 7, No 7 (2013) | Experimental Investigation of Neem Oil Methyl Ester and its Blends with Diesel as an Alternative Fuel for a DI Diesel Engine | Abstract |
| N. Nagarajan, G. Nagarajan | ||
| Vol 8, No 4 (2014) | Experimental Investigation Of Performance and Emission Of Single Cylinder diesel Engine Operating on Diesel Blended with Nano Particles | Abstract |
| Thangasamy Ganesan, P. Seenikannan, C. Kailasanathan | ||
| Vol 17, No 9 (2023) | Experimental Investigation of Solar Air Heater Using Pin Fin Absorber Plate with Pin Immersed in Paraffin Wax | Abstract |
| Premchand Kumar Mahto, Premendra Mani Pradhan, Partha Protim Das | ||
| Vol 12, No 3 (2018) | Experimental Investigation of Springback in Forming of High Strength Steel Using Split-Ring Test | Abstract |
| Shanmugasundaram Sivarajan, Raghupathy Padmanabhan | ||
| Vol 8, No 1 (2014) | Experimental Investigation of Surface Roughness and Tool Life in Hard Turning of AISI M2 Steel Using CBN Insert | Abstract |
| P. Jaganathan, R. Sivasubramanian, V. Krishnaraj | ||
| Vol 16, No 10 (2022) | Experimental Investigation of the Effect of Passive Flap Configuration on the Performance of the Darrieus Hydrokinetic Turbine at Low TSR | Abstract |
| Ahmad Wildan Mahmashani, Ridho Hantoro, Gunawan Nugroho | ||
| Vol 15, No 2 (2021) | Experimental Investigation of the Effect of Spot-Welding Process Parameters on the Tensile Strength of Similar Metal Joints | Abstract |
| Haider Jabaur Abid, Hassanein Ibraheem Khalaf, Falih Hussain Alazawi, Adnan Abdulhussain Ugla | ||
| Vol 11, No 10 (2017) | Experimental Investigation of Tool Vibration Effect on the Surface Roughness in Facing Operation of PMMA Material | Abstract |
| K. A. Mahajan, P. K. Brahmankar, R. Balasubramanium, M. R. Dhakad | ||
| Vol 12, No 3 (2018) | Experimental Investigation on Blunt-Edged UTM Delta Wing VFE-2 Configurations at Low Reynolds Number | Abstract |
| Muhammad Zal Aminullah Daman Huri, Shabudin Bin Mat, Mazuriah Said, Shuhaimi Mansor, Md. Nizam Dahalan, Ainullotfi Abdul-Latif | ||
| Vol 8, No 1 (2014) | Experimental Investigation on Electrochemical Micro Machining of Al-10%wt SiCp Based on Taguchi Design of Experiments | Abstract |
| S. Dharmalingam, P. Marimuthu, K. Raja, C. Nithyapathi, B. Babu, M. Siva | ||
| Vol 14, No 9 (2020) | Experimental Investigation on Natural Gas Injection to Minimize Abnormal Combustion and Methane Slip in the Diesel - Natural Gas Dual Fuel Engine at Low Load | Abstract |
| Betty Ariani, I Made Ariana, Aguk Zuhdi Fathallah | ||
| Vol 14, No 1 (2020) | Experimental Investigation on the Effect of Fire-Resistant Coatings on Combustion and Flame Spread Characteristics by Medium Density Fiber Boards Commonly Used in Jordan | Abstract |
| Abdullah Nasrallh Olimat, Ahmad Awad, Nabeel Abu Shaban | ||
| Vol 7, No 7 (2013) | Experimental Investigation on the Effects of Copper Nano Particles Suspended NaNO3 Electrolyte in ECM | Abstract |
| V. Sathiyamoorthy, T. Sekar | ||
| Vol 7, No 5 (2013) | Experimental Investigation on the Performance, Emission and Combustion Characteristics of a Diesel Engine Fuelled with Polymer Oil - Ethanol Blends | Abstract |
| P. Ganapathi, Y. Robinson | ||
| Vol 15, No 5 (2021) | Experimental Investigations of AISI 410 and AISI 420 Martensitic Stainless Steel in CNC Dry Milling Operation | Abstract |
| Pramod George, Philip Selvaraj D. | ||
| Vol 7, No 5 (2013) | Experimental Investigations of Silicon Carbide - Fly Ash Reinforced Aluminium Metal Matrix Composite | Abstract |
| P. Vivekanandan, V. P. Arunachalam | ||
| Vol 12, No 3 (2018) | Experimental Investigations on Flexural and Fracture Behaviors of Flax Fiber Reinforced Sandwich Panels | Abstract |
| Gopalan Venkatachalam, Ninad Hemant Mehta, Satyam Shukla, Yogendra Gupta, Akshay Sharma, Rishav Ghosh, G. Rajan | ||
| Vol 7, No 6 (2013) | Experimental Investigations on Surface Roughness, Cutting Force and Tool Wear of Duplex Stainless Steel in End Milling Using Taguchi Method | Abstract |
| D. Philip Selvaraj, P. Chandramohan, M. Mohanraj, P. K. Rajesh | ||
| Vol 11, No 6 (2017) | Experimental Method to Find the Flux and Temperature Distribution on the Flat Receiver of Small Central Receiver System | Abstract |
| P. M. Gadhe, A. G. Ghoti, S. N. Sapali, G. N. Kulkarni | ||
| Vol 11, No 6 (2017) | Experimental Performance Analysis of Refrigerant R290 for Water Cooler Application | Abstract |
| C. S. Choudhari, S. N. Sapali | ||
| Vol 10, No 6 (2016) | Experimental Researches of Hydraulic Clutches with Smart Fluids | Abstract |
| Artur Olszak, Karol Osowski, Andrzej Kęsy, Zbigniew Kęsy | ||
| Vol 15, No 9 (2021) | Experimental Studies of the Physical Model of the Milling-Rotary Snow Cleaner | Abstract |
| Mikhail Doudkin, Alina Kim, Bekbolat Moldakhanov, Gennady Kustarev, Nikita Andryukhov, Valery Rogovsky, Yelena Doudkina | ||
| 451 - 475 of 1149 Items | << < 14 15 16 17 18 19 20 21 22 23 > >> | |
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize