Issue | Title | |
Vol 7, No 7 (2013) | Energy Absorption by Square, Circular, Pentagon and Hexagonal Steel Tubes Under Impact Loading for Automotive Crush Box Applications | Abstract |
P. D. Jeyakumar, G. Devaradjane | ||
Vol 12, No 11 (2018) | Energy Conservation Approach and Control Strategy for Open Loop, Closed Loop Hydraulic Circuit in CNC Machines | Abstract |
S. Ramesh, Denis Ashok, Shanmukha Nagaraj, N. Thangadurai | ||
Vol 11, No 8 (2017) | Energy Impact Simulation in Hybrid Vehicles Using Neural Networks | Abstract |
John Villaizan, Robinson Jimenez, Olga Ramos | ||
Vol 7, No 3 (2013) | Energy Saving in the Hydraulic Cylinders by Using Novel Self-Actuated Flow Control Valve (SAFCV) | Abstract |
M. Osman Abdalla, T. Nagarajan, Fakhruldin M. Hashim | ||
Vol 7, No 3 (2013) | Engine Mapping for Improvement in Fuel Efficiency of Two Stroke SI Engine | Abstract |
K. D. Sapate, A. N. Tikekar | ||
Vol 14, No 4 (2020) | Enhanced Mesostructural Modeling and Prediction of the Mechanical Behavior of Acrylonitrile Butadiene Styrene Parts Manufactured by Fused Deposition Modeling | Abstract |
Mourad Othmani, Khalid Zarbane, Abdelkerim Chouaf | ||
Vol 14, No 1 (2020) | Enhancement of a Hydrogen Engine Cavitation Utilizing Mixed Fuel: a Review and Experimental Case Study | Abstract |
Ramadan J. Mustafa, Hani Abdallah Al-Rawashdeh, Ahmad O. Hassan, Mohamed R. Gomaa | ||
Vol 7, No 6 (2013) | Enhancement of Algorithm and Investigation of Heat Transfer Through Fins | Abstract |
Md. Moslemuddin Fakir, Sabira Khatun, Shah Nor Basri | ||
Vol 7, No 2 (2013) | Enhancement of Heat Transfer through Jet Impingement by Using Detached Ribs | Abstract |
Anupam Dewan, Deep Prakash Gupt, Sanjeev Sanghi | ||
Vol 17, No 2 (2023) | Enhancing PV Modules Performance Using L-Shaped Aluminum Fins | Abstract |
Mohammad Hamdan, Eman Abdelhafez, Ahmad Al Aboushi, Ali Othman, Shatha Al-Saleh, Salman Ajib | ||
Vol 9, No 6 (2015) | Ensemble Kalman Filter with a Square Root Scheme (EnKF-SR) for Trajectory Estimation of AUV SEGOROGENI ITS | Abstract |
Teguh Herlambang, Eko Budi Djatmiko, Hendro Nurhadi | ||
Vol 16, No 11 (2022) | Ensuring the Operability of the Hinge Coupled with the Turning Mechanism of the Loaders and Dump Trucks | Abstract |
Dinara Myrzabekova, Marek Mlynczak, Murat Muzdybayev, Alfiya Muzdybayeva | ||
Vol 13, No 4 (2019) | Errata corrige | Details |
Mahmoud Rababah, Muhammad Wasif, Mohammad Omari, Samer Mutawe | ||
Vol 12, No 7 (2018) | Establishing Energy-Damage Relationship for Fatigue Data Editing of Strain Loading History | Abstract |
Chuin Hao Chin, Shahrum Abdullah, Salvinder Singh Karam Singh, Ahmad Kamal Ariffin | ||
Vol 12, No 1 (2018) | Estimation of Design Parameters for the Development of Exoskeletons Based on Dynamic and Structural Analysis | Abstract |
Germán Darío Buitrago Salazar, João Maurício Rosário, Olga Lucia Ramos Sandoval | ||
Vol 17, No 2 (2023) | Estimation of Diameters for Selection of B-Series Propeller Using Polynomial Method | Abstract |
Edi Jadmiko, Raja Oloan Saut Gurning, Muhammad Badrus Zaman, Endang Widjiati | ||
Vol 16, No 9 (2022) | Estimation of Natural Frequencies of Cantilever Beam with Open Inclined Edge Crack | Abstract |
Sagar N. Thakre, Sunil R. Pansare, Sachin S. Naik, Hemant N. Warhatkar | ||
Vol 13, No 10 (2019) | Evaluation of Articulated Tower-Ocean Wave Energy Converter (AT-OWEC) – Part I: the Dynamic Behavior Under Wave Excitation | Abstract |
Eko Budi Djatmiko, Nur Syahroni, Sujantoko Sujantoko, Heri Supomo, Setyo Nugroho | ||
Vol 15, No 11 (2021) | Evaluation of Energy Losses in Auxiliary Systems and Mechanisms Subject to Friction in a Stationary Diesel Engine | Abstract |
Carlos Pardo García, Jhon Antuny Pabon, Marlen Fonseca Vigoya | ||
Vol 14, No 2 (2020) | Evaluation of Loads Applied on Engineering Structures Based on Structural Health Monitoring Data | Abstract |
Sergey Alekseevich Sokolov, Dmitry Georgievich Plotnikov, Aleksey Аndreevich Grachev, Vladimir Aleksandrovich Lebedev | ||
Vol 8, No 1 (2014) | Evaluation of Mechanical Properties of Aluminium Alloy 7075 Reinforced with Tungsten Carbide and Fly-Ash | Abstract |
P. Vivekanandan, V. P. Arunachalam | ||
Vol 15, No 10 (2021) | Evaluation of Performance Parameters and Emissions of a Diesel Engine Fueled with Preheated Palm Oil Mill Effluent Biodiesel Blends | Abstract |
Carlos Pardo García, Jhon Antuny Pabon, Marlen Fonseca Vigoya | ||
Vol 10, No 6 (2016) | Evaluation of Solar Parabolic Trough Collector for the Application of Seawater Desalination | Abstract |
Amer Khalil Ababneh, A. M. Jawarneh, M. A. Tarawneh, H. Tlilan, N. Duić | ||
Vol 10, No 4 (2016) | Evaluation of the Effective Distance by Stress Triaxiality on Mixed Mode Fracture I+II - Volumetric Approach | Abstract |
Oumaima Zebri, Hassan El Minor, Amine Bendarma | ||
Vol 17, No 9 (2023) | Evaluation of the Energy Recovery Capability of a Thermoelectric Generator for an Internal Combustion Engine Under Different Operating Conditions | Abstract |
Jhan Piero Rojas Suárez, Arles Ortega, Mawency Vergel Ortega | ||
401 - 425 of 1155 Items | << < 12 13 14 15 16 17 18 19 20 21 > >> |
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize