| Issue | Title | |
| Vol 8, No 6 (2014) | Dynamic and Thermal Study of the Three-Dimensional Flow in a Flat Plate Solar Collector with Transversal Baffles | Abstract |
| Mohammed Amine Amraoui, Khaled Aliane | ||
| Vol 7, No 3 (2013) | Dynamic and Thermodynamic Analysis of Film-Cooling | Abstract |
| Nor Azwadi Che Sidik, Ehsan Kianpour, Iman Golshokouh | ||
| Vol 7, No 3 (2013) | Dynamic Characteristic Analysis on Half Car Electro Pneumatic Suspension System | Abstract |
| K. Prabu, J. Jancirani, Dennie John | ||
| Vol 9, No 5 (2015) | Dynamic Emulation of a Vehicle Seat Using HIL and Rapid Prototyping | Abstract |
| Angie Julieth Valencia Castañeda, Nicolás Linares Ospina, Dario Amaya Hurtado | ||
| Vol 12, No 9 (2018) | Dynamic Mesh Forces in Accounting of the Time Variable Mesh Stiffness of a Gear Train | Abstract |
| Yuri А. Semenov, Nadezhda S. Semenova, Olga V. Egorova | ||
| Vol 10, No 7 (2016) | Dynamic Modeling and PID Control of an Underwater Robot Based on the Hardware-in-the-Loop Method | Abstract |
| Ruben Dario Hernández Beleño, Pablo Andrés Mora Gonzales, Oscar Fernando Avilés Sánchez, Janito Vaqueiro Ferreira | ||
| Vol 9, No 6 (2015) | Dynamic Response of a Plate on Elastic Foundation Under Moving Vertical and In-Plane Loads | Abstract |
| Dimitrios G. Pavlou | ||
| Vol 15, No 1 (2021) | Dynamics of a Vehicle Equipped With Mechanical Self-Regulating Stepless Transmission | Abstract |
| Sergey Ivanovich Hoodorozhkov, Aleksandr Vladimirovich Kozlenok | ||
| Vol 14, No 2 (2020) | Dynamics of Working Processes in Automatic Transmission of Tractors | Abstract |
| Sergey Hoodorozhkov, Nikolay Demidov, Andrey Krasilnikov | ||
| Vol 13, No 11 (2019) | Effect of Air Gap Width on the Evaluation of the Trombe Wall Efficiency | Abstract |
| Ehsan Fadhil Abbas | ||
| Vol 13, No 6 (2019) | Effect of Ambient Pressure on Macroscopic Spray Characteristic of Various Biodiesel Fuels | Abstract |
| Devendra Deshmukh, V. D. Chaudhari | ||
| Vol 14, No 5 (2020) | Effect of Bottom Ash Treatment and Process Variables on the Strength of Polypropylene Composites | Abstract |
| I Made Kastiawan, I Nyoman Sutantra, Sutikno Sutikno | ||
| Vol 8, No 1 (2014) | Effect of Bowl-Impeller Axial Gap in a Mixed Flow Submersible Pump Using Computational Fluid Dynamics | Abstract |
| J. Manikandan, V. Senthil, S. Nagarajan | ||
| Vol 15, No 7 (2021) | Effect of Carbon Nanotube on Microstructure and Hardness of Sn96.5Ag3.0Cu0.5 Solder for Microelectronic Packaging | Abstract |
| Intan Fatihah, Ghazali Omar, Husna A. Hamid, Mohd Azli Salim | ||
| Vol 7, No 7 (2013) | Effect of Charge Air Temperature on Specific Fuel Consumption in Intercooled Direct Injection Diesel Engines Used for Power Generation | Abstract |
| G. A. Kahandagamage, N. S. Senanayake, T. S. S. Jatunarachchi | ||
| Vol 9, No 4 (2015) | Effect of Cold Mechanical Process on the Mechanical Properties of 316L Stainless Steel for Medical Implant Application | Abstract |
| Wan Mohd Farid Wan Mohamad, Mohd Zulkefli Selamat, Bunbun Bundjali, Hamzah Mohd Dom, Masjuri Musa | ||
| Vol 13, No 3 (2019) | Effect of Compression Ratio Improvement on the Performance of Dual Fuel Engine | Abstract |
| Semin Semin, Muhammad Badrus Zaman, Agoes Santoso | ||
| Vol 11, No 4 (2017) | Effect of Continuous Hydrogen Injection on Diesel Engine Performance and Emission | Abstract |
| Mohamad Nordin Mohamad Norani, Boon Tuan Tee, Zakaria Muhammad Zulfattah, Mohamad Norani Mansor, Md Isa Ali | ||
| Vol 7, No 1 (2013) | Effect of Curing System on Properties of Fly Ash-Based Geopolymer Bricks | Abstract |
| W. I. Wan Mastura, H. Kamarudin, I. Khairul Nizar, A. M. Mustafa Al Bakri, M. BnHussain | ||
| Vol 10, No 3 (2016) | Effect of Debris Flushing in Micro-WEDM | Abstract |
| Preetam Hemant Selmokar, Akib Attar, Sujit Suresh Pardeshi | ||
| Vol 7, No 4 (2013) | Effect of Diffuser Angle on the Reattachment Point of an Incompressible Airflow | Abstract |
| Lincoln Nascimento Ribeiro, Claudia Regina de Andrade, Edson Luiz Zaparoli | ||
| Vol 14, No 8 (2020) | Effect of Elevated Temperature on Harmonic Interlaminar Shear Stress in Graphite/Epoxy FRP Simply Supported Laminated Thin Plate Using Finite Element Modeling | Abstract |
| Fadi Alfaqs, Jamil Haddad, Sayel Fayyad, Yevhenii Koroviaka, Valerii Rastsvietaiev | ||
| Vol 14, No 1 (2020) | Effect of Fin Addition on Inlet Valve on Air-Gas Intake Flow of Dual Fuel Engine Based on Computational Modelling | Abstract |
| Nilam Sari Octaviani, Semin Semin | ||
| Vol 8, No 6 (2014) | Effect of Flow Condition on Undershot Water Wheel Performance | Abstract |
| Yusuke Katayama, Shouichiro Iio, Tomomi Uchiyama, Toshihiko Ikeda | ||
| Vol 17, No 2 (2023) | Effect of Front Roll Hoop Chassis Length of FSAE Car on Stress Analysis and Deflection | Abstract |
| Rachmat Subagyo, Hajar Isworo, Kurnia Dwi Artika, Rusuminto Syahyuniar, Adhiela Noer Syaief, Femiana Gapsari | ||
| 326 - 350 of 1149 Items | << < 9 10 11 12 13 14 15 16 17 18 > >> | |
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize