Issue | Title | |
Vol 14, No 12 (2020) | Damage Accumulation Model of a Dented Pipeline Subject to Water Hammer Waves | Abstract |
Zakaria Mighouar, Hamza Khatib, Laidi Zahiri, Khalifa Mansouri | ||
Vol 12, No 3 (2018) | Damage Analysis of Corroded Pipelines Reinforced by Composite Materials | Abstract |
B. Nekkaa, D. Benzerga, A. Haddi | ||
Vol 16, No 10 (2022) | Damage Detection in Cantilever Piping System-Transporting Fluid Using Finite Element Method | Abstract |
Fadi Alfaqs, Mohamed Gaith, Zaid Haddadin, Ibrahim Al-Adwan | ||
Vol 9, No 6 (2015) | Defect Reduction in Ring Blank Casting Through Design of Experiments | Abstract |
P. Kannan, K. Balasubramanian, R. Vinayagamoorthy | ||
Vol 9, No 1 (2015) | Defluidization Detection of Sand and Sawdust Mixtures by Using the Gaussian Spectral Pressure Distribution Technique | Abstract |
Maria Regina Parise, Thiago Miranda dos Santos, Frederic Conrad Janzen | ||
Vol 14, No 4 (2020) | Deformation and Optimization of Double Tube Under Bending Loads | Abstract |
Fauzan Djamaluddin, Ilyas Renreng, Fauziah Mat | ||
Vol 16, No 5 (2022) | Delineation of the Thermal Effect Zones Generated by the Radiation Emitted by the Fireball of an LPG BLEVE, Using the Characteristic Curves of Lee's Point Source Model | Abstract |
Anas Mbarki, Aziz Ettahir, Abderraouf Guelzim | ||
Vol 12, No 6 (2018) | Design and Analysis of Fuel Cell Stack for Automotive Use | Abstract |
A. K. M. Mohiuddin, Ahmad Syafie, Ahsan Ali Khan | ||
Vol 11, No 10 (2017) | Design and Analysis of Performance Oriented Road Legal Muffler | Abstract |
A. R. Shinde, J. B. Patil, Nagesh K. Chougule, S. H. Gawande | ||
Vol 7, No 6 (2013) | Design and CFD Analysis on Heat Transfer in a Shell and Tube Condenser | Abstract |
N. Thangavelu, N. Mohandoss Gandhi | ||
Vol 7, No 1 (2013) | Design and Construction of an Underwater Robot Based Fuzzy Logic Controller | Abstract |
Ali Jebelli, Mustapha C. E. Yagoub, Ruzairi bin HJ. Abdul Rahim, Hossein Kazemi | ||
Vol 13, No 2 (2019) | Design and Development of Roasted Breadfruit Kernel Processing Machine | Abstract |
Egwuagu Marcel Onyekachi, Nwankwojike Bethrand Nduka, Nwosu James Onyekachukwu | ||
Vol 14, No 1 (2020) | Design and Fabrication of PV/Gasoline Hybrid Drive Propulsion for Fishing Hull | Abstract |
Arif Indro Sultoni, M. Marhaendra Ali, Zaenal Panutup Aji | ||
Vol 8, No 3 (2014) | Design and Implementation of an Interlaboratory Comparison Process for Task – Specific CMM Measurements | Abstract |
Vrassidas I. N. Leopoulos, Georgios Kaisarlis, Georgios Chatzistelios | ||
Vol 17, No 7 (2023) | Design and Implementation of NCTF Controller for Vertical Eccentric Rotary Positioning System | Abstract |
Perwita Kurniawan, Cahyo Budiyantoro | ||
Vol 12, No 8 (2018) | Design and Practical Realization of CNC Device Designed for Automation of the Application of Viscous Materials | Abstract |
Peter Drgona, Rastislav Stefun, Lubos Stefke | ||
Vol 11, No 7 (2017) | Design and Simulation of Condensing Heat Exchanger | Abstract |
R. S. Jha, V. K. Haribhakta, A. S. Kolte, S. N. Shekhadar, S. S. Tengale, S. M. Tare | ||
Vol 10, No 6 (2016) | Design Aspects of an Excavator Arm | Abstract |
Fahim Mahmud Khan, Md. Shahriar Islam, Md. Zahid Hossain | ||
Vol 17, No 9 (2023) | Design, Build and Test of a Mobile Solar PV Generator | Abstract |
Munzer S. Y. Ebaid, Husaam Sawalmeh, Baha Aldeen Zughayer | ||
Vol 13, No 9 (2019) | Design, Construction and Simulation of Filling a Green Sand Mould for Casting White Aluminum Parts | Abstract |
Alejandro Garcés García, Wilson Edmundo Sánchez Ocaña, Elizabeth Salazar Jácome, Luis Basantes Moreano | ||
Vol 7, No 4 (2013) | Design Improvement of ‘Air Remover Fan’ to Reduce Temperature Inside the Car | Abstract |
M. S. Hussin, A. B. Sanuddin, Z. A. Zailani, M. F. M. A. Hamzas | ||
Vol 9, No 1 (2015) | Design, Numerical Analysis and Manufacture of Radial Pump Impellers with Various Blade Geometries | Abstract |
Michail D. Mentzos, Angelos P. Markopoulos, Nikolaos I. Galanis, Dionissios P. Margaris, Dimitrios E. Manolakos | ||
Vol 10, No 1 (2016) | Design of a Bio-Inspired Equine Robot Prototype | Abstract |
Camilo Caceres, Juan Puerta, Robinson Jiménez, Diego Rojas | ||
Vol 11, No 11 (2017) | Design of a Domestic Diffusion Absorption Refrigeration System Using Evolutionary Algorithm | Abstract |
Ahmed Mohammed Adham, Mohammed Abdulqader Sulaiman | ||
Vol 7, No 5 (2013) | Design of a Fuzzy Logic Approach for Optimization of Fracture Length in Hydrofracturing Technique | Abstract |
B. Guruprasad, A. Ragupathy, T. S. Badrinarayanan, E. Sambath | ||
251 - 275 of 1149 Items | << < 6 7 8 9 10 11 12 13 14 15 > >> |
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize