Vol 8, No 1 (2014)

Open Access Open Access  Restricted Access Subscription or Fee Access

Full Issue

View or download the full issue FULL PDF

Table of Contents

Articles

Control of Base Pressure with Micro Jets for Area Ratio 2.4 PDF
Syed Ashfaq, S. A. Khan, E. Rathakrishnan 1-10

Intelligent Parametric Identification of Flexible Manipulator System PDF
Hanim Mohd Yatim, Intan Z. Mat Darus 11-21

Investigate the Effect of Using Sunflower Oil as a Lubricant During Turning Operation of Stainless Steel PDF
S. A. Adam, M. A. Fairuz, M. S. Hussin, M. R. M. Hafiezal, S. N. Khaironisa 22-27

Crashworthiness Design of Vehicle Side Door Beam Based on Elliptical Geometry Modification Using Multi-Objective Optimization PDF
Ehsan Rasooliyazdi, Rizal Bin Zahari, Ali Ghadianlou, Ali Farhaninejad, Barkawi Bin Sahari, Faieza Abdul Aziz, Hamed Jamali 28-35

Evolutionary Optimum Design for a Task Specified 6-Link Planar Robot PDF
N. Godwin Raja Ebenezer, R. Saravanan, S. Ramabalan, R. Natarajan 36-51

2D Simulation of FC72 Sessile Droplet Evaporation in the Constant Contact Line Region PDF
S. Hussain, Y. Fukatani, M. Kohno, K. Sefiane, Y. Takata 52-61

Determination of the Yield of Internal Combustion Thermal Engines PDF
Florian Ion T. Petrescu, Relly Victoria V. Petrescu 62-67

Effect of Bowl-Impeller Axial Gap in a Mixed Flow Submersible Pump Using Computational Fluid Dynamics PDF
J. Manikandan, V. Senthil, S. Nagarajan 68-74

Evaluation of Mechanical Properties of Aluminium Alloy 7075 Reinforced with Tungsten Carbide and Fly-Ash PDF
P. Vivekanandan, V. P. Arunachalam 75-79

Experimental Investigation on Electrochemical Micro Machining of Al-10%wt SiCp Based on Taguchi Design of Experiments PDF
S. Dharmalingam, P. Marimuthu, K. Raja, C. Nithyapathi, B. Babu, M. Siva 80-88

Material Properties of Random Oriented Pressed Mat Coir Fibre/ Epoxy Composites PDF
Mohd Amirul Abdul Rahman, Munaim Ali Omar Baki, Azmin Shakrine Mohd Rafie, Renuganth Vartharajoo 89-93

Numerical Simulation of the Three-Phase Flow Formed within the Riser Tube of a System Designed to Remove Leaking Oil from Maritime Accidents PDF
Dimitrios-Periklis A. Giannoulis, Dionissios P. Margaris 94-99

Determination of Rational Geometrical Parameters of Cellular Cylinders According to Characteristics of Strength and Stability PDF
A. Žiliukas, M. Kukis 100-110

Modeling Vaporous Cavitation in Transient Pipe Flow Using the Zielke’s Friction Model PDF
M. Tamani, B. Bahrar, K. Gueraoui 111-115

Taguchi Approach for the Optimization of Process Parameters of Wear in AISI 202 Tested at Elevated Temperature PDF
K. Arul Raj, M. Karthikeyan, R. Mariappan, S. Sakthisubaraja, A. S. Akilan 116-123

Exergy and Performance Analysis of Three Stage Auto Refrigerating Cascade (3 Stage ARC) System Using Zeotropic Mixture of Eco-Friendly Refrigerants PDF
M. Sivakumar, P. Somasundaram, P. Thangavel 124-134

Comparison of Different Multi-Strand Tundishes PDF
Anupam Dewan, Siddharth Gupta 135-144

Automation of Aluminum Alloy Welding PDF
P. Kah 145-152

Modified Grey Fuzzy Logic Controller for Vehicle Suspension System PDF
K. Rajeswari, S. Lavanya, P. Lakshmi 153-161

Impact of the Cut Form on the Drying Behavior without Pretreatment of Carrots in a Convective Dryer PDF
M. Lahbari, H. Benmoussa 162-167

Developing Empirical Relationships to Predict MRR and Overcut of ECM of EN38 Steel PDF
A. Kumaravelu, C. Jegadheesan, C. Senthilkumar 168-173

Experimental Investigation of Surface Roughness and Tool Life in Hard Turning of AISI M2 Steel Using CBN Insert PDF
P. Jaganathan, R. Sivasubramanian, V. Krishnaraj 174-189

Wear and Friction Behaviour of 7075Al-25 SiC Particle Composites Sliding Against Automobile Friction Material PDF
L. Jayakumar, K. Balamurugan, C. Ezilarasan 190-196

On Real Time Prediction of Cutting Forces Using ANN PDF
Hany A. El Kadi, Ibrahim M. Deiab, Amal A. Khattab 197-208

Primary Superheater Spray Control Valve Modeling Based on Levenberg-Marquardt Learning Algorithm PDF
N. A. Mazalan, A. A. Malek, Mazlan A. Wahid, M. Mailah 209-213

Fuzzy-Based Controller Design for Intelligent Robot Arm PDF
A. Jebelli, M. C. E. Yagoub, N. Lotfi, Seyyed Hossein Kazemi Riabi 214-222

Feasibility Study for Energy Recovery from Internal Combustion Engine’s Waste Heat PDF
M. T. Musthafah, H. Safarudin, R. A. Bakar, M. A. Salim, A. M. Mohd Shafie 223-227

Applicability of Robotic Welding for Aluminum Boat Manufacturing PDF
Paul Kah, Esa Hiltunen, Raimo Suoranta, Jukka Martikainen 228-235

Numerical and Mathematical Modeling of Reactive Mass Transfer and Heat Storage Installations of Argan Waste PDF
S. Men-la-yakhaf, K. Gueraoui, A. Maaouni, M. Driouich 236-240

Effect of Swirl Strength to Axial Flow Development Inside the Can Combustor PDF
M. S. A. Ishak, M. N. M. Jaafar 241-250

Special section on International Conference on Mechanical Engineering Research 2013 (ICMER 2013)

MILD Combustion: the Future for Lean and Clean Combustion Technology PDF
M. M. Noor, Andrew P. Wandel, Talal Yusaf 251-257

Implementation of LQR Controller on Electromagnetic Suspension System for Passenger’s Car PDF
Noor Hafizah Amer, Rahizar Ramli, Wan Nor Liza Wan Mahadi, Mohd Azman Zainul Abidin, Hazril Md Isa, Soong Ming Foong 258-264

Indentation Fracture Behaviour of Fibre Metal Laminates Based on Kenaf/Epoxy PDF
M. R. Abdullah, C. L. Pang, N. A. Husain, B. Abdi 265-270

Influence of N2 and H2O on UV Irradiated Bio Polymer Composite PDF
M. R. Anika Zafiah, S. R. Mohid, M. R. Shaiqah 271-276

Detection and Analysis of Defect in Steel Tube Using Vibration Impact Acoustic Emission (VIAE) Method PDF
A. H. Zakiah, N. Jamaludin, J. Syarif, S. Y. S. Yahya 277-282

Potential of Microalgae Tetraselmis Chuii as Feedstock for Biodiesel Application PDF
P. Kumaran, N. Saifuddin, S. Janarthanan 283-288

Effect of Solution Treatment Temperature on Microstructure and Mechanical Properties of A356 Alloy PDF
M. Ishak, A. Amir, A. H. Ahmad 289-295




Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2019 Praise Worthy Prize