Open Access
Subscription or Fee Access
Full Issue
View or download the full issue | FULL PDF |
Table of Contents
Articles
The Assessment of the in-Cylinder Pressure by Means of the Morpho-Dynamical Vibration Analysis - Methodology and Application | |
A. Amoresano, V. Avagliano, V. Niola, G. Quaremba | 999-1006 |
A Statistical Method to Identify the Main Parameters Characterizing a Pressure Swirl Spray | |
A. Amoresano, G. Langella, V. Niola, G. Quaremba | 1007-1013 |
A Perspective Method for the Identification of the Transverse and Longitudinal Residual Internal Stress in Aluminium T-Joint FSW. First Evidences | |
A. Amoresano, V. Avagliano, V. Niola, G. Quaremba | 1014-1020 |
Double Diffusive Natural Convection in Non-Darcy Porous Media with Non-Uniform Porosity | |
Mohammed Sammouda, Kamal Gueraoui, Mohamed Driouich, Abdelhak Ghouli, Abdelhak Dhiri | 1021-1030 |
Investigation of the Flow Characteristics in a Sink-Swirl Flow within Two Disks | |
Ali M. Jawarneh | 1031-1036 |
Enhancement of Algorithm and Investigation of Heat Transfer Through Fins | |
Md. Moslemuddin Fakir, Sabira Khatun, Shah Nor Basri | 1037-1043 |
A Comparative Study of Two Mechanical Agitated System in Case of Non-Newtonian Fluids | |
L. Rahmani, B. Draoui, E. Benachour, B. Mebarki, Oussama Seghier | 1044-1052 |
Influence of Cross Sectional Shape on the Heat Transfer Characteristics of Ladder Type Micro Channel Heat Sinks for ULSI | |
R. Brinda, R. Joseph Daniel, K. Sumangala | 1053-1061 |
Unsteady Flow Produced by Oscillations of Two Rotating Coaxial Disks | |
H. Volkan Ersoy | 1062-1068 |
Optimization of a Refrigerant Base Nanofluid-Cooled Microchannel Heat Sink with Pumping Power Consideration | |
Ahmed M. Adham | 1069-1073 |
CFD Study on Heat Transfer to Bingham Fluid During with Gate Impeller | |
L. Rahmani, B. Draoui, M. Bouanini, E. Benachour | 1069-1079 |
Numerical Study of the Effect of Interrupted Fins on the Effectiveness of Cross-Flow Heat Exchanger | |
Hassene Djemel, Mounir Baccar, Mohamed Mseddi | 1080-1086 |
Asymptotic Solutions of Pressure and Heat Flux of Highly Rarefied Gas Flows in Vacuum Packaged Micro-Electro-Mechanical System Devices | |
Khaleel Al Khasawneh, Mohammad Tarawneh | 1087-1093 |
Design and CFD Analysis on Heat Transfer in a Shell and Tube Condenser | |
N. Thangavelu, N. Mohandoss Gandhi | 1094-1102 |
Formulation of Superplasticized Limestone Concrete of Turonian | |
Z. Makhloufi, M. Bederina, Bouziani Tayeb, E. H. Kadri, M. Bouhicha | 1103-1114 |
A Microstructure-Based Model for Describing Softening Process During Compression of Al-30%wt Zn Alloy | |
M. Borodachenkova, S. Santos, F. Barlat, J. J. Gracio | 1115-1120 |
The Post-Buckling Behavior of the Composite Plates with Embedded Shape Memory Alloy Subjected to Combined Loading Using Finite Element Method | |
Z. A. Rasid, R. Zahari, A. Ayob | 1121-1127 |
Analysis of Cenosphere - Aluminium Metal Matrix Composite for Engine Block | |
V. Saravanan, P. R. Thyla, S. R. Balakrishnan | 1128-1132 |
Experimental Investigations on Surface Roughness, Cutting Force and Tool Wear of Duplex Stainless Steel in End Milling Using Taguchi Method | |
D. Philip Selvaraj, P. Chandramohan, M. Mohanraj, P. K. Rajesh | 1133-1141 |
Microstructure and Dry Sliding Wear Behavior of AA2218 Based Self-Lubricating Metal Matrix Composites | |
A. Anandha Moorthy, N. Natarajan, P. K. Palani, M. Manojkumar | 1142-1146 |
Finite Element Analysis of Super Energy Saving Locking System Towards Enhancing Door Lock Performance and Security | |
Sivarao Subramonian, Abdul Alif bin Abdul Aziz, Raja Izamshah bin Raja Abdullah, - Taufik, Hambali Arep | 1147-1151 |
Experimental Study to Identify Common Engine Part Load Conditions between Malaysian City Driving and NEDC Test | |
I. Zahari, M. A. Abas, N. I. Mat Arishad, S. F. Zainal Abidin, M. F. Muhamad Said | 1152-1158 |
CFD and Experimental Analysis of a Condenser for Domestic Desalination System | |
Shashikant S. Patil, A. B. Auti, T. P. Singh | 1159-1163 |
Brake Motion Control for Quadruped Hopping Robot by Using Reference Height Control System | |
A. M. Kassim, T. Yasuno, Subramonian Sivarao, H. I. Jaafar, F. A. Jafar | 1164-1170 |
An Innovative Study and Binary Modeling of Thermal Power Plant Using Artificial Neural Network and Multiple Linear Regression | |
S. Devi, L. Sivakumar, M. Saravanan | 1171-1179 |
Review of Structural Assessment of Pipe Bends | |
S. Sellakumar, R. Venkatasamy | 1180-1188 |
Stresses in Thin, Multi-Layer Pipes in Large Radial Vibrations | |
Shahin Nayyeri Amiri, Asad Esmaeily, Javad Safadoust | 1189-1193 |
Numerical Simulation of Hot Isostatic Pressing Process for the Manufacture of Parts Used in Biomechanics | |
A. Kherraf, K. Zidani, H. Mazouz, L. Chelghoum, L. Rezoug | 1194-1197 |
Development of On-Line Drill Wear Monitoring System in Machining of AISI 1018 Steel Using Virtual Instrumentation | |
S. Rajesh, K. Marimuthu | 1198-1206 |
Properties of Silica Sand-Based Castings Prepared with Different Proportions of Steel Industry Fly Ash | |
P. Karunakaran, C. Jegadheesan, C. Rangasami, P. Sengottuvel | 1207-1212 |
Active Disturbance Rejection Control of Nonlinear Thermal Process | |
Maruthai Suresh, Chinnappan Selvakumar, Ranganathan Rani Hemamalini | 1213-1217 |
Numerical Solution to Thermal Fluid Flow Through Porous Media Using Lattice Boltzmann Method | |
Nor Azwadi C. Sidik, Syahrullail Samion | 1218-1222 |
A Comparison of Cylindrical and Row Trenched Cooling Holes with Alignment Angle of 90 Degree Near the Combustor Endwall | |
Ehsan Kianpour, Nor Azwadi C. Sidik, Syahrullail Samion | 1223-1228 |
Feasibility Study of Dish Stirling Systems in Malaysia | |
M. E. Zailani | 1229-1235 |
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize