Quality Assurance During Milling of Precision Elements of Machines Components with Ceramic Cutting Tools

Viacheslav Maksarov; Aleksei Khalimonenko

doi:10.15866/ireme.v12i5.14570

Quality Assurance During Milling of Precision Elements of Machines Components with Ceramic Cutting Tools

Viacheslav Maksarov^(1*), Aleksei Khalimonenko⁽²⁾

^(*) Corresponding author

Authors' affiliations

DOI: https://doi.org/10.15866/ireme.v12i5.14570

Abstract

The article considers matters related to the problems that arise during machining of mating surfaces and bed shears by fine milling with tools equipped with ceramic cutting bits on the basis of the analysis of the surface layer quality requirements and current quality assurance technologies. Research results have shown that one of the quality improvement methods during fine milling of machine component mating surfaces and bed shears is the determination of operability of tools equipped with replaceable ceramic cutting bits.
Copyright © 2018 Praise Worthy Prize - All rights reserved.

Keywords

Ceramic Cutting Tools; Tool Reliability; Milling; Machining Quality; Mating Surface

Full Text:

PDF

References

A. P. Minakov, I. D. Kamchitskaya, D. L. Zaitsev, A. V. Tyukov, Resource-saving pneumovibrodynamic hardening of plane surfaces for repair and production processes, Russian Engineering Research, Vol. 29, n. 7, pp. 678-686, 2009.
http://dx.doi.org/10.3103/s1068798x09070090

H. K. Matsumoto, A. E. Diniz, Evaluating the quality of turned hardened steel workpieces, Revista Brasileira de Ciencias Mecanicas / Journal of the Brazilian Society of Mechanical Sciences, Vol. 21, n. 2, pp. 343-354, 1999.

Y. Liu, T. Li, Y. Zhang, L. Dai, C. Lu, Study on modeling of milling processing system and parameter identification algorithm, Zhendong Ceshi Yu Zhenduan / Journal of Vibration, Measurement and Diagnosis, Vol. 34, n. 5, pp. 868-872, 2014.

B. Denkena, T. Grove, E. Hasselberg, Workpiece shape deviations in face milling of hybrid structures, Materials Science Forum, Vol. 825-826, pp. 336-343, 2015.
http://dx.doi.org/10.4028/www.scientific.net/msf.825-826.336

B. Denkena, E. Hasselberg, Influence of the cutting tool compliance on the workpiece surface shape in face milling of workpiece compounds, Procedia CIRP, Vol. 31, pp. 7-12, 2015.
http://dx.doi.org/10.1016/j.procir.2015.03.074

Q. Li, X. Ji, S. Y. Liang, Pattern recognition of tool wear in high-speed milling based upon nonlinear analysis, Proceedings of 2017 IEEE 7th International Conference on Electronics Information and Emergency Communication, ICEIEC 2017, 8076617, pp. 511-515, 2017.
http://dx.doi.org/10.1109/iceiec.2017.8076617

R. Torrecillas San Millan, A. E. Seleznev, V. D. Gurin, P. Y. Peretyagin, Specifics of wear of ceramic cutting tool inserts featuring Al2O3-TiC dies when face milling hardened cast iron, Materials Science Forum, Vol. 876, pp. 43-49, 2016.
http://dx.doi.org/10.4028/www.scientific.net/msf.876.43

W. Grzesik, Wear development on wiper Al2O3-TiC mixed ceramic tools in hard machining of high strength steel, Wear, Vol. 266 (9-10), pp. 1021-1028, 2009.
http://dx.doi.org/10.1016/j.wear.2009.02.010

Salem, S., Tool-Life Model for Ceramics through Experimental Design in High Speed Machining (HSM) of 36NiCrMo16 Steel, (2013) International Review of Mechanical Engineering (IREME), 7 (3), pp. 499-506.

J. Olt, M. Madissoo, V. Maksarov, Dynamic stabilization of technological systems for processing edge cutting through local metastability, Proceedings - 2011 IEEE International Symposium on Assembly and Manufacturing, n. 5942348, 2016.
http://dx.doi.org/10.1109/isam.2011.5942348

Selvaraj, D., Chandramohan, P., Mohanraj, M., Rajesh, P., Experimental Investigations on Surface Roughness, Cutting Force and Tool Wear of Duplex Stainless Steel in End Milling Using Taguchi Method, (2013) International Review of Mechanical Engineering (IREME), 7 (6), pp. 1133-1141.

Ain Souya, L., Berriche, Y., Gheldane, F., Louidi, S., Zouaghi, Z., Labidi, M., Mechanical and Tribological Characterization of a Composite Ceramics Al2O3-ZrO2-3Al2O3+2SiO2, (2015) International Journal on Numerical and Analytical Methods in Engineering (IRENA), 3 (5), pp. 112-117.

Suresh, P., Marimuthu, K., Ranganathan, S., Determination of Optimum Parameters in Turning of Aluminium Hybrid Composites, (2013) International Review of Mechanical Engineering (IREME), 7 (1), pp. 116-125.

P. Suresh, K. Marimuthu, S. Ranganathan, Determination of Optimum Parameters in Turning of Aluminium Hybrid Composites, International Journal on Advanced Materials and Technologies (IREAMT), Vol. 1, n. 2, pp. 84-94, 2013.

I. G. Euan, E. Ozturk, N. D. Sims, Modeling static and dynamic cutting forces and vibrations for inserted ceramic milling tools, Procedia CIRP, Vol. 8, pp. 564-569, 2013.
http://dx.doi.org/10.1016/j.procir.2013.06.151

V. Maksarov, A. Khalimonenko, D. Timofeev, Machining quality when lathing blanks with ceramic cutting tools, Agronomy Research, Vol. 12, n. 1, pp. 269-278, 2014.

V. Maksarov, A. Khalimonenko, J. Olt, Effect of porosity on the performance of cutting ceramics, Agronomy Research, Vol. 14, n. 1 (SI), pp. 1043-1052, 2016.

Refbacks

There are currently no refbacks.

Username
Password
Remember me