Seeding Section Design Development and Determination of the Forces and Driving Resistance to the Penetration of its Disc Coulters into the Soil

Mikhail Doudkin; Alina Kim; Vladimir Yakovlev; Valery Rogovsky; Andrey Vavilov; Georgiy Guryanov; Timur Kurmangaliyev

doi:10.15866/ireme.v17i4.23371

Seeding Section Design Development and Determination of the Forces and Driving Resistance to the Penetration of its Disc Coulters into the Soil

Mikhail Doudkin⁽¹⁾, Alina Kim^(2*), Vladimir Yakovlev⁽³⁾, Valery Rogovsky⁽⁴⁾, Andrey Vavilov⁽⁵⁾, Georgiy Guryanov⁽⁶⁾, Timur Kurmangaliyev⁽⁷⁾

^(*) Corresponding author

Authors' affiliations

DOI: https://doi.org/10.15866/ireme.v17i4.23371

Abstract

The article presents a new approach to determining the influence of the working depth of disc coulters on their traction resistance. The study is based on the theory of improving the mechanization means of sowing grain with the simultaneous application of fertilizers. The research theory is based on the proven dependencies of soil mechanics, the process of furrow formation, as well as dependencies that make it possible to determine the conditions for the stability of the sowing section in the horizontal and vertical planes, which complements the theory of sowing units. The design scheme of a new disk sowing section of a grain-fertilizer seeder is presented, which ensures the performance of several technological operations in one pass of the sowing complex: loosening the soil in the sowing zone, sowing seeds above the fertilizer application level, applying the main fertilizer below the seed placement level, compacting the soil under and above the sown seeds. The results obtained are confirmed experimentally and, in certain cases, compared with the information presented in independent scientific sources.
Copyright © 2023 Praise Worthy Prize - All rights reserved.

Keywords

Angle of Sowing Discs Attack; Plant Residues; Disc Coulter; Lancet Share; Fertilizer Line; Compacting Roller; Penetration Force into the Soil

Full Text:

PDF

References

Doudkin, M., Kim, A., Moldakhanov, B., Kustarev, G., Andryukhov, N., Rogovsky, V., Doudkina, Y., Experimental Studies of the Physical Model of the Milling-Rotary Snow Cleaner, (2021) International Review of Mechanical Engineering (IREME), 15 (9), pp. 453-463.
https://doi.org/10.15866/ireme.v15i9.20952

Doudkin, M., Kim, A., Moldakhanov, B., Determination of Forces in the Working Unit of the Milling-Rotary Snow Cleaner, (2021) International Review of Mechanical Engineering (IREME), 15 (2), pp. 96-105.
https://doi.org/10.15866/ireme.v15i2.20859

Kim, A., Doudkin, M., Guryanov, G., Mlynczak, M., Eleukenov, M., Bugaev, A., Rogovsky, V. (2019). Process modeling and experimental verification of the conditions of ice coverage destruction of automobile roads. Journal of Mechanical Engineering Research and Developments (JMERD), 42(4), pp. 01-08.
https://doi.org/10.26480/jmerd.04.2019.01.08

Aleshkov, D.S., Sukovin, M.V. (2018). The model of the formation of snow piles at work milling and rotary snowblower. The Eurasian Scientific Journal, 6(10), 12 р.
https://esj.today/PDF/13SAVN618.pdf

Saveliev, A., Zhileykin, M., Mikhailovskaya, V., Doudkin, M., Kim, A., Mlynczak, M., Kustarev, G., Grib, V. (2019). Increasing the reliability of the autograder metal construction by modeling and re-assembling of the working equipment. News of the National Academy of Sciences of the Republic of Kazakhstan, Series of Geology and Technical Sciences, Vol. 6, Issue 438, p. 276-286.
https://doi.org/10.32014/2019.2518-170X.179

Doudkin, M., Kim, A., Savelyev, A., Zhileikin, M., Gribb, V., Mikhailovskaya, V., Modernization of the Metal Structure of the Grader Working Equipment, (2020) International Review of Mechanical Engineering (IREME), 14 (1), pp. 1-8.
https://doi.org/10.15866/ireme.v14i1.17990

Doudkin, M.V., Pichugin, S.Y.U., Fadeyev, S.N. (2013). The analysis of road machine working elements parameters. World Applied Sciences Journal, 23(2), pp. 151-158

Doudkin, M.V., Pichugin, S.Y.U., Fadeyev, S.N. (2013). Studying the machines for road maintenance. Life Science Journal, 2013, 10(SPL.ISSUE 12), pp. 134-138, 24

Doudkin, M., Apshikur, B., Kim, A., Ipalakov, T., Asangaliyev, E., Mlynczak, M., Tungushbayeva, Z. (2019). Development of mathematical models describing the processes occurring in the railway track construction as a whole, or in the work of its individual elements. News of the National Academy of Sciences of the Republic of Kazakhstan, Series of Geology and Technical Sciences, vol. 5, issue 437, 6-15.
https://doi.org/10.32014/2019.2518-170X.120

Doudkin, M., Kim, A., Sakimov, M. (2020). Mathematical and experimental study of deformations of a steel roll of a road roller with a variable geometry of a contact surface. Production Engineering Archives, Vol. 25, p. 1-7.
https://doi.org/10.30657/pea.2019.25.01

Doudkin, M., Kim, A., Młyńczak, M., Kustarev, G., Kim, V. (2019). Development and parameter justification of vibroscreen feed elements. Mining Machines and Earth-Moving Equipment: Problems of Design, Research and Maintenance, pp. 203-226.
https://doi.org/10.1007/978-3-030-25478-0_10

Vavilov, A., Kim, A., Guryanov, G., Likunov, A. (2020) New technology of the steel fiber manufacturing from technogenic waste. International Journal of Mechanical and Production Engineering Research and Development, 10 (3), pp. 611-622.
https://doi.org/10.24247/ijmperdjun202056

Doudkin, M., Kim, A., Moldakhanov, B., Determination of Forces in the Working Unit of the Milling-Rotary Snow Cleaner, (2021) International Review of Mechanical Engineering (IREME), 15 (2), pp. 96-105.
https://doi.org/10.15866/ireme.v15i2.20859

Sakimov, M.A., Ozhikenova, A.K., Abdeyev, B.M., Ozhiken, A.K., Azamatkyzy, S. (2018). Finding allowable deformation of the road roller shell with variable curvature. News of the National Academy of Sciences of the Republic of Kazakhstan, Series of Geology and Technical Sciences, 2018, 3(429), pp. 197-207

Kim A., Doudkin M., Ermilov A., Kustarev G., Sakimov M., Mlynczak M. Analysis of vibroexciters working process of the improved efficiency for ice breaking, construction and road machines. (2020). Journal of vibroengineering, vol. 22, issue 3, 465-485.
https://doi.org/10.21595/jve.2020.20446

Doudkin, M.V., Apshikur, B., Kim, A.I., Asangaliyev, E.A., Mlynczak, M. (2019). Development of an installation for shear ground testing in the railway track construction. News of the National Academy of Sciences of the Republic of Kazakhstan, Series of Geology and Technical Sciences, 2019, 6(438), pp. 22-35.
https://doi.org/10.32014/2019.2518-170X.152

Traoré, B., Doumiati, M., Olivier, J., Morel, C., Adaptive Power Sharing Algorithm Combined with Robust Control for a Multi-Source Electric Vehicle: Experimental Validation, (2022) International Review of Electrical Engineering (IREE), 17 (1), pp. 39-53.
https://doi.org/10.15866/iree.v17i1.21269

Doudkin M., Kim A., Kim V., Mlynczak M., Kustarev G. Computer Modeling Application for Analysis of Stress-strain State of Vibroscreen Feed Elements by Finite Elements Method. Communications in computer and information science, Vol. 998, 2019, p. 82-96.
https://doi.org/10.1007/978-3-030-12203-4_9

Kim, A., Guryanov, G., Vavilov, A., Bugayev, A., Doudkina, Y., Development of Mounted Impact-Rotor Working Equipment for Destruction of Snow-Ice Formations, (2021) International Review of Mechanical Engineering (IREME), 15 (5), pp. 258-267.
https://doi.org/10.15866/ireme.v15i5.20805

Alina Kim, Mikhail Doudkin, Alexandr Ermilov, Gennadiy Kustarev, Murat Sakimov, Marek Mlynczak. Analysis of vibroexciters working process of the improved efficiency for ice breaking, construction and road machines. Journal of vibroengineering. May 2020. Volume 22, issue 3, 465-485
https://doi.org/10.21595/jve.2020.20446

Refbacks

There are currently no refbacks.

Username
Password
Remember me