Open Access Open Access  Restricted Access Subscription or Fee Access

Ensuring the Operability of the Hinge Coupled with the Turning Mechanism of the Loaders and Dump Trucks


(*) Corresponding author


Authors' affiliations


DOI: https://doi.org/10.15866/ireme.v16i11.23261

Abstract


The article considers the problem of ensuring the operability of articulated units of load haul dumpers. The hinge units were found to have an insufficiently reliable design and lack technical state controllability. It was identified that the pivot skew assembly units used in load haul dumpers based on articulated truck frames are the least reliable design elements.  Tests and experiments have proven that the worn-out hinge units tend to dismantle from the vehicles when exposed to vibration causing the pin to come out from the coupling. This results in critical vehicle failures caused by the loss of the unit assembly integrity since the unit ensures vehicle safety.  Certain technical design solutions aimed at improving the operability and controllability of the hinge assembly. This article reviews a concept method based on the Maintenance 4.0 approach for managing operability and reliability of load haul dumpers.
Copyright © 2022 Praise Worthy Prize - All rights reserved.

Keywords


Machines; Loader; Dumper; Turning Mechanism; Hinge Unite; Operability

Full Text:

PDF


References


SME Mining Engineering Handbook. (Third Edition, Edited by Peter Darling. Published by Society for Mining, Metallurgy, and Exploration, Inc. 2011. 1912 p.) ISBN 978-0-87335-264-2. Ebook 978-0-87335-341-0.

Machinery's Handbook. (29th Edition. NEW YORK, INDUSTRIAL PRESS, 2012. 3915 p.). ISBN 978-0-8311-2905-7.

Piotr A. Dudziński. Design characteristics of steering systems for mobile wheeled earthmoving equipment. Journal of Terramechanics. Volume 26, Issue 1, 1989, pp. 25-82.
https://doi.org/10.1016/0022-4898(89)90025-6

Yuming Yin, Subhash Rakheja, Jue Yang, Paul-Émile Boileau. Design optimization of an articulated frame steering system. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 232(10):095440701772905. November 2017.
https://doi.org/10.1177/0954407017729052

Adam Rehnberg, Lars Drugge, Annika Stensson Trigell. Snaking stability of articulated frame steer vehicles with axle suspension. International Journal of Heavy Vehicle Systems. Vol. 17, No. 2. 2010. pp 119-138.
https://doi.org/10.1504/IJHVS.2010.033178

Tao Xu, Yanhua Shen, Yanjun Huang, Amir Khajepour. Study of Hydraulic Steering Process for Articulated Heavy Vehicles Based on the Principle of the Least Resistance. IEEE/ASME Transactions on Mechatronics. Volume: 24, Issue: 4, August 2019. pp. 1662-1673. ISSN 1083-4435.
https://doi.org/10.1109/TMECH.2019.2924191

Y.P. Sofronov, Y.P. Stoyanova, N.E. Kopralev, G.D. Todorov. Kinematic study of the articulated trucks operating layout of turn for articulated vehicles, IOP Conference Series: Materials Science and Engineering, Volume 618, 8th International Scientific Conference "TechSys 2019" - Engineering, Technologies and Systems 16-18 May 2019, Plovdiv, Bulgaria. IOP Publishing.
https://doi.org/10.1088/1757-899X/618/1/012044

Yu. S. Bochkarev, I. V. Zyryanov. Reliability of dump trucks in placer mining in permafrost zone. April 2022. Gornyi Zhurnal.
https://doi.org/10.17580/gzh.2022.04.15

M.A.Chowdhury, D.M.Nuruzzaman. Experimental Investigation on Friction and Wear Properties of Different Steel Materials. Tribology in Industry. Vol. 35. No. 1 (2013). Pp:42-50.
https://doi.org/10.4018/ijseims.2013010103

Hamid Ghaednia, Xianzhang Wang, Swarna Saha,Yang Xu, Aman Sharma, Robert L. Jackson. A Review of Elastic-Plastic Contact Mechanics. Applied Mechanics Reviews. NOVEMBER 2017, Vol. 69(6) / 060804-3.
https://doi.org/10.1115/1.4038187

Y.N. Oteny, V.F. Kazak, E.V. Morozova. Determination of Geometrical Parameters Contact Zone for Detail Machining Surface Plastic Deformation. Procedia Engineering, December 2017, 206 (2017). Pp. 1482-1487.
https://doi.org/10.1016/j.proeng.2017.10.665

Van-Long Hoang, Hung Nguyen Dang, Jean-Pierre Jaspart, Jean-François Demonceau. An overview of the plastic-hinge analysis of 3D steel frames. Asia Pacific Journal on Computational Engineering. Vol. 2, No. 4 (2015).
https://doi.org/10.1186/s40540-015-0016-9

Bagmutov V.P., Dudkina N.G., Zakharov I.N., Romanenk M.D., Chekunov V.V. Influence of structure and properties of surface layer on fatigue durability of hardened steels strengthened by combined electromechanical treatment. Izvestiya. Ferrous Metallurgy. 2019;62(6):438-450. (In Russ.)
https://doi.org/10.17073/0368-0797-2019-6-438-450

James A. Greenwood. Metal Transfer and Wear. Frontiers in Mechanical Engineering. August 2020. Volume 6. Article 62.
https://doi.org/10.3389/fmech.2020.00062

Koh-ichi Sugimoto , Tomohiko Hojo, Yuta Mizuno. Surface-hardened Layer Properties of Newly Developed Case-hardening Steel. ISIJ International. Vol. 58 (2018). Issue 4. Pp. 727-733.
https://doi.org/10.2355/isijinternational.ISIJINT-2017-460

Alexey Beskopylny, Besarion Meskhi, Nikolay Onishkov, Lubov Kotelnitskaya, Oxana Ananova. Deep Contact Strength of Surface Hardened Gears. Metals, 2020. 10(5). 600.
https://doi.org/10.3390/met10050600

V. P. Radchenko, T. I. Bochkova, V. V. Tsvetkov. Residual stresses relaxation in surface-hardened half-space under creep conditions. Vestn. Samar. Gos. Tekhn. Univ., Ser. Fiz.-Mat. Nauki [J. Samara State Tech. Univ., Ser. Phys. Math. Sci.], 19:3 (2015), pp. 504-522.
https://doi.org/10.14498/vsgtu1428

Bolobov V.I., Kremcheev E.A., Korotkova O.Yu. Study of energy capacity of friction wear of steel 45 samples after various heat treatment. Modern high technologies. - 2019. - № 1 - P. 26-30. (In Russ.) ISSN 1812-7320.

Kombayev K., Muzdybayev M., Muzdybayeva A., Myrzabekova D., Wieleba W., Leśniewski T. Functional Surface Layer Strengthening and Wear Resistance Increasing of a Low Carbon Steel by Electrolytic-Plasma Processing. Strojniški vestnik - Journal of Mechanical Engineering 68(2022) 9, pp. 542-551. ISSN 0039-2480.
https://doi.org/10.5545/sv-jme.2022.147

Shets, S.P., Gorlenko, A.O. & Boldyrev, D.A. Wear of Steel Friction Pair at the Level of the Real Contact Area. Steel Transl. 52, 245-250 (2022).
https://doi.org/10.3103/S0967091222020218

Mr. Rajesh S. Godse , Dr. S.H.Gawande. Some Investigations on Friction & Wear Properties of Different Steel Materials. International Engineering Research Journal (IERJ) Special Issue 2 Page 4980-4984, 2015, ISSN 2395-1621.

Alexey Rodichev, Aleksander Novikov, Andrei Gorin, Maria Tokmakova. Analysis of the wear resistance of a hard anti-friction coating, applied to a plain bearing, under the conditions of boundary friction, October 2021. Transportation Research Procedia 57(5):573-580.
https://doi.org/10.1016/j.trpro.2021.09.086

Yuting Li, Xie Mingling, Qi Sun, Xiaojun Xu, Xiaoqiang Fan, Guangan Zhang, Hao Li, Minhao Zhu. The effect of atmosphere on the tribological behavior of magnetron sputtered MoS2 coatings. October 2019 Surface and Coatings Technology 378:125081.
https://doi.org/10.1016/j.surfcoat.2019.125081

Goncharov, S.V. Improving the Reliability of Hinge Joint Oil Pumps. Chem Petrol Eng 53, 621-626 (2018).
https://doi.org/10.1007/s10556-018-0391-5

P.A. Lebedev et al. Lebedev P.A., Lebedev A.T., Pavlyk R.V. and Zakharin A.V. Improving the reliability of machine and tractor units in technological processes, 2022. IOP Conf. Ser.: Earth Environ. Sci. 996 012004.
https://doi.org/10.1088/1755-1315/996/1/012004

A D Pogrebnjak, M A Lisovenko, A Turlybekuly and V V Buranich. Protective coatings with nanoscale multilayer architecture: current state and main trends. Uspekhi Fizicheskikh Nauk, Russian Academy of Sciences and IOP Publishing. Physics-Uspekhi, Volume 64, Number 3.
https://doi.org/10.3367/UFNe.2020.08.038823

Rakhadilov Bauyrzhan, Pogrebnjak Alexander, Sagdoldina Zhuldyz, Buitkenov Dastan, Beresnev Vyacheslav and Amina Mukhamedova. Effect of Bilayer Thickness and Bias Potential on the Structure and Properties of (TiZr/Nb)N Multilayer Coatings as a Result of Arc-PVD Deposition / Materials 2022, 15(21), 7696;
https://doi.org/10.3390/ma15217696

Robert M. Gresham, George E. Totten. Lubrication and Maintenance of Industrial Machinery: Best Practices and Reliability. (CRC Press, 2008. 296 p.) ISBN 978-1-4200-8935-6.

A. Dykha, Juozas Padgurskas, Yu. Kukurudzyak, O. Babak. Wear and reliability of cylindrical vehicle joints. Problems of Tribology, V.25, No 3/97-2020, 64-69. September 2020.
https://doi.org/10.31891/2079-1372-2020-97-3-64-69

Grzegorz Wszelaczy'nski, Dymitry Capanidis, Maciej Paszkowski, and Tadeusz Le'sniewski. Operating Problems of Lubrication of Friction Nodes in Mining MachinesWorking in an Aggressive Environment. Advances in Hydraulic and Pneumatic Drives and Control 2020 (NSHP 2020, LNME, 2021. 228-240).
https://doi.org/10.1007/978-3-030-59509-8_20

Allahkarami, Z., Sayadi, A.R. & Ghodrati, B. Identifying the mixed effects of unobserved and observed risk factors on the reliability of mining hauling system. Int J Syst Assur Eng Manag 12, 281-289 (2021).
https://doi.org/10.1007/s13198-021-01073-3

Alangghya Susatya Adigama, Gunawan Dwi Haryadi, Sulistyo, Mohammad Tauviqirrahman, Agus Suprihanto, Prima Febriyana, Gilar Pandu Annanto, Didik Djoko Susilo, and Seon Jin Kim. Reliability analysis and critical part lifetime prediction of heavy duty articulated dump truck on coal mining industry, AIP Conference Proceedings 2097, 030088 (2019).
https://doi.org/10.1063/1.5098263

Jiao Long Liu, Xi Zhi Hu. Reliability Analysis and Optimization of Large Mining Dump Truck Steering Knuckle. September 2013. Key Engineering Materials 579-580:405-410.
https://doi.org/10.4028/www.scientific.net/KEM.579-580.405

Agustina Hotma Uli Tumanggor. Reliability value analysis of dump truck 108 unit (case study: South Kalimantan coal mining company), AIP Conference Proceedings 2044, 020019 (2018).
https://doi.org/10.1063/1.5080072

Liudmyla Kovalevych, Oleksandr Tolkach, Hanna Kireitseva, Dmytro Bilobrov, Mykhailo Kachurovskyi. Research of reliability of vehicle dump park in the conditions of Omelyan's career. SCIENTIFIC PAPERS OF DONNTU Series: "The Mining and Geology" January 2021.
https://doi.org/10.31474/2073-9575-2021-1(25)-2(26)-44-51

S. Zh. Kabikenov, T. S. Intykov, E. Zh. Kyzylbaeva, N. B. Zharkenov. Procedure for acquisition and processing of information on reliability of parts and units of open pit dump trucks. September 2015. Gornyi Zhurnal 2015(9):69-71.
https://doi.org/10.17580/gzh.2015.09.15

Dinara Myrzabekova, Mikhail Dudkin, Marek Młyńczak, Alfiya Muzdybayeva, Murat Muzdybayev. Concept of Preventive Maintenance in the Operation of Mining Transportation Machines . Engineering in Dependability of Computer Systems and Networks, 2019. Volume 987. P. 349-357. ISSN 2194-5365.
https://doi.org/10.1007/978-3-030-19501-4_35

D.M. Myrzabekova, M.S. Muzdybayev, A.S. Muzdybayeva. Ensuring the Operability of Hinge Units of Underground Loaders on Swivelling Frames. Bulletin of D. Serikbayev EKTU, 2020, №4. P. 136-140. ISSN 1561-4212.
https://doi.org/10.51885/15614212_2020_4_136

Kuznetsov A.V., Shalkov A.V. Methods of improving the reliability of dump trucks hydraulic system. Izvestiya MGTU MAMI. - 2015. - Vol. 9. - N. 3-1. - P. 45-55.
https://doi.org/10.17816/2074-0530-67191

Mining Equipment Reliability (pp.183-197) DOI:10.1201/9781003132103-10 / in Book: Applied Reliability for Engineers. By B.S. Dhillon. 1st Edition First Published. 2021. 232 Pages. eBook Published 19 April 2021. Pub. LocationBoca Raton. Imprint CRC Press. eBook ISBN 9781003132103.
https://doi.org/10.1201/9781003132103

A. Bolotnev, P. Batudayev, V. Bashelkhanov. On the issue of reconstructing pivot actuator pins of load-haul-dump trucks. Young Researchers' Journal of ISTU. 2016. № 6-2 (85). Pp. 127-130.

GOST R 55153-2012 The mountain-mine equipment. Underground loading-transport machines. The safety requisitions and test methods. Moskow: Standartinform, 2014. 24 p.
https://docs.cntd.ru/document/1200101758

Cat 3306B DITA Propulsion.
https://pdf.nauticexpo.com/pdf/caterpillar-marine-power-systems/cat-3306b-dita-propulsion/19997-19158.html

Boris Gerike, Aleksandr Zacharov, Pavel Gerike and Yuriy Drozdenko. Problems of Operational Safety of Dump Trucks in Open Pit Mine / January 2019 E3S Web of Conferences 134(2):01005.
https://doi.org/10.1051/e3sconf/201913401005

Andrii Slipchuk, Petro Pukach, Vovk Myroslava, Olha Slyusarchuk . Advancing asymptotic approaches to studying the longitudinal and torsional oscillations of a moving beam. June 2022. Eastern-European Journal of Enterprise Technologies 3(7(117)):31-39.
https://doi.org/10.15587/1729-4061.2022.257439

Mattia Cenedese, Joar Axås, H. Yang, Melih Eriten, George Haller. Data-driven nonlinear model reduction to spectral submanifolds in mechanical systems. August 2022. Philosophical Transactions of The Royal Society A Mathematical Physical and Engineering Sciences 380(2229).
https://doi.org/10.1098/rsta.2021.0194

Jerzy Warminski, Krzysztof Kecik. Instabilities in the main parametric resonance area of a mechanical system with a pendulum. May 2009 Journal of Sound and Vibration 322(3):612-628.
https://doi.org/10.1016/j.jsv.2008.06.042

Gavasheli L, Gavasheli A (2021) Random oscillations of nonlinear systems with distributed Parameter. Ann Math Phys 4(1): 084-091.
https://doi.org/10.17352/amp.000027

Lu, Hao & Zhu, Zhencai & Shuang, Cao & Wang, Zhihua. (2022). Reliability Analysis on Vibration Wear for Main Bearing of a Mine Hoist. Zhendong Ceshi Yu Zhenduan. Journal of Vibration, Measurement and Diagnosis. 42. 687-663.

C. P. Liu, Ping Wu, Li Wang. Particle climbing along a vibrating tube: A vibrating tube that acts as a pump for lifting granular materials from a silo. April 2013. Soft Matter 9(19):4762-4766.
https://doi.org/10.1039/c3sm27955c

Fuweng Zhang, Li Wang, C. P. Liu, Ping Wu. Climbing motion of grains in vibrating tubes with different geometries. November 2016. Advanced Powder Technology 28(2).
https://doi.org/10.1016/j.apt.2016.09.027

Vira Malkina, Sergey Kiurchev, Taras Hutsol, Valentуna Verkholantseva, Lyidmila Kiurcheva, Mykola Miroshnichenko, Mykola Biliuk, Vitaliy Pidlisnyj, Hatice Gürgülü, Zbigniew Kowalczyk. Optimization of Parameters of a Vibroconveyor System for Infrared Drying of Soy. September 2022 Agricultural Engineering 26(1):157-166.
https://doi.org/10.2478/agriceng-2022-0013

Hiroyuki Kawamoto, Keita Kubo, Masato Adachi. Vertical Transportation of Lunar Regolith and Ice Particles Using Vibrating Tube. July 2021 Journal of Aerospace Engineering 34(6).
https://doi.org/10.1061/(ASCE)AS.1943-5525.0001346

Pat. 35087 Republic of Kazakhsnan, IPC B64D 29/06 (2006.01). Connecting device for connecting the first and second elements pivotally rotated relative to each other [Text] / Myrzabekova D.M.; Muzdybayev M.S.; Muzdybayeva A.S.; Mukhamedova A.I.; Młyńczak M.J.; Kadyrov Zh.N., patent holder Kadyrov Zhannat Nurgaliyevich. - No. 2020/0273.1; declared 28.04.2020; published 28.05.2021, Bulletin No. 21. - 4 p.

Chesworth, D.: Industry 4.0 Techniques as a Maintenance Strategy (A Review Paper). Glyndwr University (2018). Preprint January 2018.
https://doi.org/10.13140/RG.2.2.18116.32644

Małgorzata Jasiulewicz-Kaczmarek, Stanisław Legutko, Piotr Kluk. Maintenance 4.0 technologies - new opportunities for sustainability driven maintenance. Management and Production Engineering Review; 2020; vol. 11; No 2. pp. 74-87.
https://doi.org/10.24425/mper.2020.133730

Yuan Cheng. Predictive Analysis on Maintenance of Mining Dump Truck / July 2013. Applied Mechanics and Materials 340:848-851.
https://doi.org/10.4028/www.scientific.net/AMM.340.848

Li, Z., Wang, Y. & Wang, KS. Intelligent predictive maintenance for fault diagnosis and prognosis in machine centers: Industry 4.0 scenario. Adv. Manuf. 5, 377-387 (2017).
https://doi.org/10.1007/s40436-017-0203-8

Krupitzer, C., Wagenhals, T., Züfle, M., Lesch, V., Schäfer, D., Mozaffarin, A., ... & Kounev, S. (2020). A Survey on Predictive Maintenance for Industry 4.0. arXiv e-prints, arXiv-2002.
https://doi.org/10.48550/arXiv.2002.08224

Hajime IKEDA, Youhei KAWAMURA, Zedrick Paul L. TUNGOL, Yutaka ITO, Hyongdoo JANG, Development of Underground Space Communication Systems Using Wi-Fi Ad Hoc for Smart Mining, Geoinformatics, 2018, Volume 29, Issue 1, Pages 3-11, Released on J-STAGE March 25, 2018, Online ISSN 1347-541X, Print ISSN 0388-502X.
https://doi.org/10.6010/geoinformatics.29.1_3

Patri, Ashutosh. (2013). Wireless Communication Systems For Underground Mines - A Critical Appraisal. International Journal of Engineering Trends and Technology. (IJETT). Volume 4, Issue 7, July 2013. 3149-3153.


Refbacks

  • There are currently no refbacks.


Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize