Open Access Open Access  Restricted Access Subscription or Fee Access

Estimation of Diameters for Selection of B-Series Propeller Using Polynomial Method


(*) Corresponding author


Authors' affiliations


DOI: https://doi.org/10.15866/ireme.v17i2.23176

Abstract


Propeller selection is very important to obtain maximum efficiency from several existing propeller options. However, before choosing a propeller many parameters should be determined, one of which is the estimated diameter. From the existing literature, in order to determine the diameter the value of rotation should be given first. This can be an obstacle if the calculation of the new ship design has not determined the main engine power needed to push the ship. Whereas, in order to find the engine power requirements, the value of propeller efficiency is needed in the calculation of delivery power. With this diameter estimation, later it can bring up the performance and efficiency values of some B-Series propeller types by using the polynomial method.
Copyright © 2023 Praise Worthy Prize - All rights reserved.

Keywords


Propeller Selection; Propeller Diameter; B-Series; Polynomial

Full Text:

PDF


References


Chungen Yin, Christian Kjaer Rosenvinge, Marcus Pless Sandland, Anders Ehlers, Anders Ehlers, Keun Woo Shin, 2023, Improve Ship Propeller Efficiency via Optimum Design of Propeller Boss Cap Fins, Energies, 16(3), 1247.
https://doi.org/10.3390/en16031247

Lewis, E. V. 1988. Principles of naval architecture second revision. Jersey: SNAME, vol. 2.

Mossad, M. A., and Yehia, W. 2011. Skewed Propeller Design for Minimum Induced Vibrations. 1st international Symposium on Naval Architecture and Maritime. Istanbul. 24-25 October 2011.

Gaafary, M. M. 2009. Computerized method for propeller design of optimum diameter and rpm. in 13th Congress of IMAM, Istanbul, Turkey. 12-15 Oct 2009. 211-220.

Breslin, J. P., and Andersen, P. 1996. Hydrodynamics of ship propellers. Vol. 3. Cambridge University Press.

Mina Tadros, Manuel Ventura, Carlos Guedes Soares 2021. Design of Propeller series optimizing fuel consumption and propeller efficiency. J. Mar. Sci. Eng 9(11).
https://doi.org/10.3390/jmse9111226

Harvald, S. A. 1992. Resistance and propulsion of ships.

Jadmiko, E. 2019. Analysis Of The Effect Variation Skew Angle B-Series Propeller On Performance And Cavitation Using Computational Fluid Dynamic Methods. International Journal of Mechanical Engineering and Technology (IJMET). Vol. 10(5): 219-234.

Kuiper, G. 1992. The Wageningen propeller series. Marin.

Hae-ji Ju, Jung-sik Choi, 2022, Experimental Study of Cavitation Damage to Marine Propellers Based on the Rotational Speed in the Coastal Waters, Machines 2022, 10(9), 793.
https://doi.org/10.3390/machines10090793

Carlton, J. 2018. Marine propellers and propulsion. Butterworth - Heinemann.
https://doi.org/10.1016/B978-0-08-100366-4.00002-X

Van Lammeren, W. P. A., Van Manen, J. D., and M. W. C. Oosterveld, M.W.C. 1969. The Wageningen B-screw series. 269-317.

Oosterveld, M. W. C., and Van Oossanen, P. 1975. Further computer-analyzed data of the Wageningen B-screw series. International Shipbuilding Progress. Vol. 22:251-262.
https://doi.org/10.3233/ISP-1975-2225102

Sherbaz, S., and Duan, W. 2014. Ship trim optimization: assessment of influence of trim on resistance of MOERI container ship. The Scientific World Journal.1-6.
https://doi.org/10.1155/2014/603695

Yu Lu, Chunxiao Wu,Shewen Liu, Zhuhao Gu, Wu Shao, Chuang Li, 2021, Research on Optimization of Parametric Propeller Based on Anti-Icing Performance and Simulation of Cutting State of Ice Propeller, J. Mar. Sci. Eng 9(11).
https://doi.org/10.3390/jmse9111247

Wang, X.,2020. CFD-Based Performance Study of Large Skew Propellers; Dalian Maritime University: Dalian, China.

Sahak, Ahmad Sofianuddin A., Nor Azwadi Che Sidik, and Siti Nurul Akmal Yusof. "A Brief Review of Particle Dispersion of Cavity Flow." Journal of Advanced Research in Applied Sciences and Engineering Technology 20, no. 1 (2020): 27-41.
https://doi.org/10.37934/araset.20.1.2741

Triwibowo, Bayu, Heni Wahyu Widayanti, and Miftakhul Indra Rukmanasari. "Prediction of Erotion Rate in Two Elbows for Coal-Air Flow Based on Computational Fluid Dynamics Simulation." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 97, no. 2 (2022): 115-125.
https://doi.org/10.37934/arfmts.97.2.115125

Ariani, Betty, I. Made Ariana, and Aguk Zuhdi M. Fathallah. "Numerical Study of Emissions on DDF Engine with 20% CNG with Variation on Compression Ratio." In Recent Advances in Renewable Energy Systems, pp. 289-294. Springer, Singapore, 2022.
https://doi.org/10.1007/978-981-19-1581-9_32

Elsafty, Kareem Ahmed Ismail, Atif Mohamed Emad Elsherif, Ahmed Abdelhamid Ibrahim, Omar Sherif Mohamed, and Ahmed Mohamed Reda Elbaz. "Investigating the Performance of a Novel Multi-Element Airfoil Concept Using Numerical Analysis." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 97, no. 2 (2022): 126-145.
https://doi.org/10.37934/arfmts.97.2.126145

Purwana, Agung, I. Made Ariana, and Wisnu Wardhana. "Numerical study on the cavitation noise of marine skew propellers." Journal of Naval Architecture and Marine Engineering 18, no. 2 (2021): 97-107.
https://doi.org/10.3329/jname.v18i2.38099

Kusdiana, W., Sanuri, S., Ariana, I., Analysis of Ship Resistance Based on Horizontal Placement of Fin Stabilizer Using CFD Software, (2022) International Review on Modelling and Simulations (IREMOS), 15 (1), pp. 53-63.
https://doi.org/10.15866/iremos.v15i1.20104

Kunalan, Kerishmaa Theavy, Cheng Yee Ng, and Nauman Riyaz Maldar. "A performance investigation of a multi-staging hydrokinetic turbine for river flow." Progress in Energy and Environment 17 (2021): 17-31.
https://doi.org/10.37934/progee.17.1.1731

Prihandanu, R. B., I. M. Ariana, and D. W. Handani. "Analysis of Stern Shape Effect on Pre-Duct Propeller Performance Based on Numerical Simulation." In IOP Conference Series: Materials Science and Engineering, vol. 1052, no. 1, p. 012016. IOP Publishing, 2021.
https://doi.org/10.1088/1757-899X/1052/1/012016

Munazid, A., I. M. Ariana, and I. K. A. P. Utama. "Numerical Study of Pre-Duct on Traditional Fishing Vessels as Energy Saving Device (ESD)." In IOP Conference Series: Earth and Environmental Science, vol. 557, no. 1, p. 012049. IOP Publishing, 2020.
https://doi.org/10.1088/1755-1315/557/1/012049

Muhammad, Andi Haris, Muhammad Iqbal Nikmatullah, and Faisal Mahmuddin. "Water Depth Effect to Ferry Ship Resistance with Computational Fluid Dynamic Method." CFD Letters 14, no. 5 (2022): 98-105.
https://doi.org/10.37934/cfdl.14.5.98105

Aouimer, Y., Boutchicha, D., Hamoudi, B., Numerical and Experimental Study of Fluid-Structure Interaction of a Marine Propeller, (2020) International Review of Mechanical Engineering (IREME), 14 (5), pp. 282-289.
https://doi.org/10.15866/ireme.v14i5.17582

C Kusuma, et.al, Design Propeller of Fast Missile Boat 60m By using Gawn Series, IOP Conference Series: Materials Science and Engineering 1052 (1), 012026, 2021.
https://doi.org/10.1088/1757-899X/1052/1/012026

Siswantoro, N., Semin, S., Zaman, M., Criticality Assessment for Marine Diesel Engine Using Failure Mode and Effect Criticality Analysis (FMECA) Approach: Case Study on Lubricating Oil System, (2020) International Review of Mechanical Engineering (IREME), 14 (4), pp. 258-263.
https://doi.org/10.15866/ireme.v14i4.18060

C Kusuma, IM Ariana, B Ali, Redesign KCR 60m Bow with Axe Bow Type To Reduce Ship Resistance, IOP Conference Series: Earth and Environmental Science 557 (1), 012033, 2020.
https://doi.org/10.1088/1755-1315/557/1/012033

S Helma, Surprising Behaviour of the Wageningen B-Screw Series Polynomials, J. Mar. Sci. Eng. 2020, 8, 211, 2020.
https://doi.org/10.3390/jmse8030211

Setiawan, Wira, Amalia Ika Wulandari, Aditya Miftahul Huda, and Syerly Klara. "Comparative Study of Ship Resistance and Fuel Consumption between Axe Bow and Moor Deep Ram Bow using CFD Method." CFD Letters 14, no. 8 (2022): 71-80.
https://doi.org/10.37934/cfdl.14.8.7180

Sunarsih, Jadmiko E, Zaman MB , Maimun A and Ali A. "Enhancing A Reliable Ship Performance Evaluation in Dynamic Maneuvering Condition-A Gap analysis." International Journal of Technology (IJTECH), no. 3, Vol. 14 (2023).
https://doi.org/10.14716/ijtech.v14i3.5489


Refbacks

  • There are currently no refbacks.


Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize