Open Access Open Access  Restricted Access Subscription or Fee Access

Behavior of Composite Bolted Joint Under Tension-Shear and Compression-Shear Load Cases


(*) Corresponding author


Authors' affiliations


DOI: https://doi.org/10.15866/ireme.v17i1.23002

Abstract


Composite materials are widely used to derive benefits such as improved performance of gadgets and machines by reducing weight. While connecting composite parts, bolted connections are preferred. This paper discusses the performance analysis of composite bolted connections based on peak load and stiffness for the two load cases, tension-shear and compression-shear loading. Experimental research on the behavior of the joint has led to the development of regression equations that can forecast the peak load and stiffness of the connection. The predicted and experimental responses have a reasonable correlation. The regression models were validated using additional experiments. Desirability function analysis was done to identify the optimum parameter settings to enhance the responses to the applied loadings. The results of the desirability function analysis were verified through the Taguchi analysis of S/N ratios.
Copyright © 2023 Praise Worthy Prize - All rights reserved.

Keywords


Composite Bolted Joint; Tension-Shear Loading; Compression Shear Loading; Peak Load; Joint Stiffness

Full Text:

PDF


References


Panding Wang, Rujie He, Hansen Chen, Xiaolei Zhu, Qilin Zhao, Dining Fang, A novel predictive model for mechanical behavior of single-lap GFRP composite bolted Joint under static and dynamic loading, Composites Part B, 79,322-330, 2015.
https://doi.org/10.1016/j.compositesb.2015.04.053

Andrew Joe Vander Klok, Metal to composite bolted joint behavior evaluated at impact rates of loading, Composite Structures, 106, 446-452, 2013.
https://doi.org/10.1016/j.compstruct.2013.06.004

B. L. Agarwal, Static Strength Prediction of Bolted Joint in Composite Material, 18, 11, 1371, 1980.
https://doi.org/10.2514/3.50892

Yuxing Yang, Xueshu Liu, Yi-Qi Wang, Hang Gao, Yongjie Bao, Rupeng Li, An enhanced spring-mass model for stiffness prediction in single-lap composite joints with considering assembly gap and gap shimming, Composite Structures, 187, 18-26, 2018
https://doi.org/10.1016/j.compstruct.2017.12.041

H. M. Hsiao, I. M. Daniel, Strain rate behavior of composite materials, Composites Part B, 29B, 521-533, 1998.
https://doi.org/10.1016/S1359-8368(98)00008-0

M.A. McCarthy, C.T. McCarthy, G.S. Padhi, A simple method for determining the effects of the bolt-hole clearance on load distribution in single-column multi-bolt composite joints, Composite Structures, 73, 78-87, 2006.
https://doi.org/10.1016/j.compstruct.2005.01.028

A. Olmedo, C. Santiuste, E. Barbero, An analytical model for the secondary bending prediction in single-lap composite bolted-joints, Composite Structures, 111, 354-361, 2014.
https://doi.org/10.1016/j.compstruct.2014.01.015

Arul Raj, K., Karthikeyan, M., Mariappan, R., Sakthisubaraja, S., Akilan, A., Taguchi Approach for the Optimization of Process Parameters of Wear in AISI 202 Tested at Elevated Temperature, (2014) International Review of Mechanical Engineering (IREME), 8 (1), pp. 116-123.

Muhmmed, A., Hussain, M., Khudadad, A., Mahdi, H., Mejbel, M., Mechanical Behavior of Laser Engraved Single Lap Joints Adhered by Polymeric Material, (2021) International Review of Mechanical Engineering (IREME), 15 (12), pp. 622-628.
https://doi.org/10.15866/ireme.v15i12.21278

Chupava, C., Thinvovgpituk, C., The Study on Collapse Behavior and Crashworthiness Capacity of AL/CFRP Tubes Focusing on Fiber Angles and Stacking Sequence, (2021) International Review of Mechanical Engineering (IREME), 15 (8), pp. 442-452.
https://doi.org/10.15866/ireme.v15i8.21339

Afif, F., Mokas, N., Boulanouar, L., Influence of Cutting Parameters on the Service Life of Twist HSS Drill Bit When Drilling C35 Steel, (2021) International Review of Mechanical Engineering (IREME), 15 (7), pp. 378-384.
https://doi.org/10.15866/ireme.v15i7.21174

Devarasiddappa Devarajaiah, Chandrasekaran Muthumari, Evaluation of power consumption and MRR in WEDM of Ti-6Al-4V alloy and its simultaneous optimization for sustainable production, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40, 400, 2018.
https://doi.org/10.1007/s40430-018-1318-y

P. Sivaiah, D. Chakradhar, Modeling and optimization of a sustainable manufacturing process in the machining of 17-4 PH stainless steel, Measurement, 134, 142-152, 2019.
https://doi.org/10.1016/j.measurement.2018.10.067

K. I. Tserpes, P. Papanikos, TH. Kermanidis, A three-dimensional progressive damage model for bolted joints in composite laminates subjected to tensile loading, Fatigue & Fracture of Engineering Materials & Structures, 24, 663-675, 2001.
https://doi.org/10.1046/j.1460-2695.2001.00424.x

FU-KUO CHANG, Kuo-Yen Chang, Post-Failure Analysis of Bolted Composite Joints in Tension or Shear-Out Mode Failure, Journal of Composite Materials, 21, 9, 809-833, 1987.
https://doi.org/10.1177/002199838702100903

Matekar, S., Fulambarkar, A., Tolerance Design of Path Generating Four Bar Mechanism, (2019) International Review of Mechanical Engineering (IREME), 13 (12), pp. 700-709.
https://doi.org/10.15866/ireme.v13i12.18328

AR Shamaei- Kashani and MM Shokrieh, Strain rate effects on the mechanical behavior of single-lap glass/carbon nanofiber/epoxy composite bolted joints, Journal of Composite Materials 0(0) 1-13, 2020.

Amin Ekhtiyari, Mahmood M. Shokrieh, René Alderliesten, Loading rate effects on mode-I delamination in glass/epoxy and glass/CNF/epoxy laminated composites, Engineering Fracture Mechanics, 228, 2020.
https://doi.org/10.1016/j.engfracmech.2020.106908

Ahmet Can, Ahmet Meram, Dynamic behavior of screwed joints for CFRP composite laminate structures under impact loading, Journal of Manufacturing Processes, Volume 75, March 2022, Pages 232-242.
https://doi.org/10.1016/j.jmapro.2022.01.016

Yangjie ZUO, Ting YUE, Ruisong JIANG, Zengqiang CAO, Liu YANG, Bolt insertion damage and mechanical behaviors investigation of CFRP/CFRP interference fit bolted joints, Chinese Journal of Aeronautics, Volume 35, Issue 9, 2022, Pages 354-365.
https://doi.org/10.1016/j.cja.2022.01.027

El Aissaoui El Meliani, M., Debab, A., Benhamou, A., Amen, T., Terashima, M., Yasui, H., Modelling the (α)-factor in a Pneumatic Bioreactor Using the Taguchi Approach, (2020) International Review on Modelling and Simulations (IREMOS), 13 (4), pp. 252-259.
https://doi.org/10.15866/iremos.v13i4.19173

Alrashdan, M., Quality and Damping Factors Optimization Using Taguchi Methods in Cantilever Beam Based Piezoelectric Micro-Power Generator for Cardiac Pacemaker Applications, (2020) International Review on Modelling and Simulations (IREMOS), 13 (2), pp. 74-84.
https://doi.org/10.15866/iremos.v13i2.18347

Al-Sawalmeh, W., Alrashdan, M., Alnaanah, M., Alasha'ary, H., Daqrouq, K., Study of the Effects of Control Factors on Speech Features Using Taguchi Method, (2022) International Review of Electrical Engineering (IREE), 17 (1), pp. 99-104.
https://doi.org/10.15866/iree.v17i1.21145

Setyawan, M., Mahardika, M., Sriani, T., Prihandana, G., Miki, N., Precision Electropolishing on Fabricating SS 316L Microchannel - A Taguchi Approach, (2021) International Journal on Engineering Applications (IREA), 9 (4), pp. 209-216.
https://doi.org/10.15866/irea.v9i4.19947

Sabry, I., Idrisi, A., Mourad, A., Friction Stir Welding Process Parameters Optimization Through Hybrid Multi-Criteria Decision-Making Approach, (2021) International Review on Modelling and Simulations (IREMOS), 14 (1), pp. 32-43.
https://doi.org/10.15866/iremos.v14i1.19537


Refbacks

  • There are currently no refbacks.


Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize