Open Access Open Access  Restricted Access Subscription or Fee Access

A Proposed Modification to the JAYA Optimization Algorithm - Application to an Abrasive Water Suspension Jet Machining Process


(*) Corresponding author


Authors' affiliations


DOI: https://doi.org/10.15866/ireme.v16i8.22425

Abstract


Optimization plays a vital role in the application of the Industry 4.0 features in the manufacturing sector. Several optimization techniques are in use to date and immensely benefit the user. JAYA is a metaheuristic optimization method that doesn’t require any algorithm-specific parameters. This algorithm has the disadvantage of sometimes getting locked at local optima. This article offers a Modified-JAYA (ModJAYA) algorithm that incorporates the concept of ‘diversity’ into the JAYA algorithm to address the above-mentioned problem. It also hastens the entry of elite solution candidates from diverse solution space. The proposed algorithm ModJAYA is tested on two standard benchmark functions. It is then applied to an Abrasive Water Suspension Jet (AWSJ) machining process to optimize the process parameters. The effectiveness of the ModJAYA algorithm is compared with that of the JAYA algorithm and verified with that of the PSO algorithm. The ModJAYA algorithm outperformed JAYA and PSO algorithms by taking the least mean number of generations for convergence.
Copyright © 2022 Praise Worthy Prize - All rights reserved.

Keywords


Abrasive Water Suspension Jet Machining; Metaheuristic Optimization; JAYA; Particle Swarm Optimization

Full Text:

PDF


References


Dhanalakshmi, S., Babu, T., Parametric Optimization of CNC Turning on LM25 Aluminum Alloy Using Taguchi Based Grey Relational Analysis, (2019) International Review of Mechanical Engineering (IREME), 13 (5), pp. 311-317.
https://doi.org/10.15866/ireme.v13i5.17410

Samantaraya, D., Lakade, S., Optimization of Machining Parameters in Hard Turning of Automotive Gears with PCBN tool using Taguchi Method, (2021) International Review of Mechanical Engineering (IREME), 15 (5), pp. 278-286.
https://doi.org/10.15866/ireme.v15i5.21070

Paloboran, M., Gani, H., Saharuna, S., Musa, M., Performance Optimization of a Spark Ignition Engine Fueled with Gasoline-Bioethanol (E85) Using RSM and Non-Linear Programming Approach, (2021) International Review of Mechanical Engineering (IREME), 15 (2), pp. 67-78.
https://doi.org/10.15866/ireme.v15i2.19798

Yadav, S., Kumar, S., Goyal, M., PID Tuning and Stability Analysis of Hybrid Controller for Robotic Arm Using ZN, PSO, ACO, and GA, (2022) International Review of Mechanical Engineering (IREME), 16 (5), pp. 257-264.
https://doi.org/10.15866/ireme.v16i5.21982

Diaz, J., Valencia, G., Duarte, J., Multi-Objective Optimization of a Concentric Tube Heat Exchanger for Waste Heat Recovery in a Natural Gas Turbocharged Engine, (2019) International Review of Mechanical Engineering (IREME), 13 (10), pp. 619-626.
https://doi.org/10.15866/ireme.v13i10.18385

A. M. Zain, H. Haron, S. Sharif, Estimation of the Minimum Machining Performance in the Abrasive Water Jet Machining using Integrated ANN-SA. Expert Systems with Applications, Vol. 38, n. 7, pp. 8316-8326, 2011.
https://doi.org/10.1016/j.eswa.2011.01.019

A.M Zain, H. Haron, S. Sharif, Optimization of Process Parameters in the Abrasive Water Jet Machining using Integrated SA-GA. Applied Soft Computing, Vol. 11, pp. 5350-5359, 2011.
https://doi.org/10.1016/j.asoc.2011.05.024

P. R. Vundavilli, M. B. Parappagoudar, S. P. Kodali, S. Benguluri, Fuzzy Logic-Based Expert System for Prediction of Depth of Cut in Abrasive Water Jet Machining Process. Knowledge-Based Systems, Vol. 27, pp. 456-464, 2012.
https://doi.org/10.1016/j.knosys.2011.10.002

M.A. Mellal, E.J. Williams, Parameter Optimization of Advanced Machining Processes using Cuckoo Optimization Algorithm and Hoopoe Heuristic. Journal of Intelligent Manufacturing, Vol. 27, pp. 927-942, 2016.
https://doi.org/10.1007/s10845-014-0925-4

R. Shukla, D. Singh, Selection of Parameters for Advanced Machining Processes using Firefly Algorithm. Engineering Science and Technology, an International Journal, Vol. 20, pp. 212-221, 2017.
https://doi.org/10.1016/j.jestch.2016.06.001

A. Wibowo, Hybrid Kernel Principal Component Regression and Penalty Strategy of Multiple Adaptive Genetic Algorithms for Estimating Optimum Parameters in Abrasive Water Jet Machining. Applied Soft Computing, Vol. 62, n. 1, pp. 102-1112, 2018.
https://doi.org/10.1016/j.asoc.2017.09.048

R. Shukla, D. Singh, Experimentation Investigation of Abrasive Water Jet Machining Parameters using Taguchi and Evolutionary Optimization Techniques. Swarm Evolutionary Computation, Vol. 32, pp. 167-183, 2017.
https://doi.org/10.1016/j.swevo.2016.07.002

D. Vijayan, T. Rajmohan, Modeling and Evolutionary Computation on Drilling of Carbon Fiber-reinforced Polymer Nanocomposite: An Integrated Approach using RSM and PSO. Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 41, pp. 395, 2019.
https://doi.org/10.1007/s40430-019-1892-7

G. Prudencio, C. Celis, J. S. Armacanqui, J. Sinchitullo, Development of an evolutionary artificial neural network-based tool for selecting suitable enhanced oil recovery methods. Journal of the Brazilian Society of Mechanical Sciences and Engineering. Vol. 44, n. 121, 2022
https://doi.org/10.1007/s40430-022-03403-3

B. Rajeswari, K.S. Amirthagadeswaran, Study of Machinability and Parametric Optimization of End Milling on Aluminum Hybrid Composites using Multi-objective Genetic Algorithm. Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 40, n. 377, 2018.
https://doi.org/10.1007/s40430-018-1293-3

Jai Aultrin, K., Anand, M., Optimization of Machining Parameters in AWJM Process for Lead Tin Alloy Using RSM and Regression Analysis, (2015) International Review of Mechanical Engineering (IREME), 9 (2), pp. 136-144.
https://doi.org/10.15866/ireme.v9i2.4791

Zainuddin, F., Abd Samad, M., A Mating Technique for Various Crossover in Genetic Algorithm for Optimum System Identification, (2021) International Review of Mechanical Engineering (IREME), 15 (11), pp. 574-581.
https://doi.org/10.15866/ireme.v15i11.21102

A. Nair, S. Kumanan, K.P. Shanavas, Heuristic optimization techniques in Abrasive Water Jet hole making - A case study. Proc. of Material Today: Proceedings, 2nd International Conference on Functional Materials, Manufacturing and Performances, 2021, pp. 1291-1299.
https://doi.org/10.1016/j.matpr.2021.08.230

Zainuddin, F., Abd Samad, M., Comparison of Crossover in Genetic Algorithm for Discrete-Time System Identification, (2021) International Review of Mechanical Engineering (IREME), 15 (2), pp. 59-66.
https://doi.org/10.15866/ireme.v15i2.19726

R.V. Rao, Jaya: A Simple and New Optimization Algorithm for solving Constrained and Unconstrained Optimization Problems. International Journal of Industrial Engineering Computations, Vol. 7, pp. 19-34, 2016.
https://doi.org/10.5267/j.ijiec.2015.8.004

H. Louis, F. Pude, C. Von Rad, R. Versemann, Abrasive Water Suspension Jet Technology Fundamentals, Application and Developments. Welding in the World, Vol. 51, n. 9-10, pp. 11-16, 2007.
https://doi.org/10.1007/BF03266595

Z. Li, S. Yao, F. Yun, X. Wang, L. Wang, Y. Wu, Simulation and Optimization of the Nozzle Section Geometry for a Suspension Abrasive Water Jet. Machines, Vol. 10, n. 1, pp. 1-19, 2022.
https://doi.org/10.3390/machines10010003

A. Perec, A. Radomska-zalas, A.Fajdek-bieda, F. Pude, Process Optimization by Applying the Response Surface Methodology (RSM) to the Abrasive Water Suspension Jet Cutting of Phenolic Composites. Facta Universitatis, pp. 1-16, 2022.

K. Agarwal, S. Joshi, D. Asudani, D. Savani, D. Patel, A. R. Prajapati, K.P. Desai, H.K. Dave, Optimization of electro discharge machining parameters, using non-traditional optimization techniques, Proc. of Lecture Notes in Mechanical Engineering, 2nd International Conference on Recent Advances in Manufacturing, Surat, 2022, pp. 329-340.
https://doi.org/10.1007/978-981-16-9952-8_30

A. Khamari, R.K. Hasda, Implementation of Jaya algorithm on ultrasonic machining for constrained optimization of process parameters, Proc. of Lecture Notes in Mechanical Engineering, 4th International E-Conference on Advanced Materials and Modern Manufacturing, 2022, pp. 1073-1083.
https://doi.org/10.1007/978-981-19-0244-4_99

M.U. Gaikwad, A. Krishnamoorthy, V.S. Jatti, Implementation of Jaya algorithm for process parameter optimization during EDM processing of NiTi 60alloy, Proc. of Materials Today: Proceedings, 3rd International E-Conference on Frontiers in Mechanical Engineering and Nanotechnology, 2021, pp. 5701-5708.
https://doi.org/10.1016/j.matpr.2021.04.157

A.V. Vishnu, S.S. Babu, Mathematical Modeling and Multi Response Optimization for Improving Machinability of Alloy Steel using RSM, Grey Relational Analysis and Jaya Algorithm, International Journal of Engineering Transactions C: Aspects, Vol. 34, n. 9, 2021.
https://doi.org/10.5829/ije.2021.34.09c.13

V. Rajashekar, S.N. Yeole, Multi-objective optimization of machining parameters in µ-EDM drilling of SS317L using novel JAYA and TLBO algorithms, Proc. of Lecture Notes in Mechanical Engineering, 1st International Conference on Energy and Material Sciences and Mechanical Engineering, New Delhi, 2022, pp. 1363-1376.
https://doi.org/10.1007/978-981-16-2794-1_115

Kesarwani, S., Verma, R.K. & Debnath, K. Modified JAYA Algorithm for Machinability Assessment and Conflicting Response Optimization During Milling of Nanostructured Carbon Onions Reinforced Epoxy Composites. Exp Tech 46, 1007-1025 (2022).
https://doi.org/10.1007/s40799-021-00543-4

K. V. J. Bhargav, P. S. Balaji, Ranjeet Kumar Sahu & Jitendra Kumar Katiyar (2022) Exemplary approach using tool rotation-assisted µ-ECDM for CFRP composites machining, Materials and Manufacturing Processes.
https://doi.org/10.1080/10426914.2022.2072879

D.C. Montgomery, Design and Analysis (8th edition, John Wiley & Sons, Inc., New York, USA, 2005).

N. Agarwal, N. Shrivastava, M.K. Pradhan, Optimization of EDM Process Parameters using Jaya Algorithm. Material Today Proceedings, Vol. 24, pp. 825-834, 2020.
https://doi.org/10.1016/j.matpr.2020.04.391

M. Singh, J. Ramkumar, R. V. Rao, J. Balic, Experimental Investigation and Multi-objective Optimization of Micro-wire Electrical Discharge Machining of a Titanium Alloy using Jaya Algorithm. Advances in Production Engineering and Management, Vol. 14, pp. 251-263, 2019.
https://doi.org/10.14743/apem2019.2.326

R.V. Rao, Jaya: An advanced optimization algorithm and its engineering applications (1st edition, Springer, Cham, Cham, Switzerland 2019).

R.V. Rao, D.P. Rai, J. Balic, Multi-objective Optimization of Abrasive Water Jet Machining Process using Jaya Algorithm and PROMETHEE Method. Journal of Intelligent Manufacturing, Vol. 30, pp. 2101-2127, 2019.
https://doi.org/10.1007/s10845-017-1373-8

N. Agarwal, N. Shrivastava, M. K. Pradhan, Optimization of EDM Process Parameters using Jaya Algorithm. Proc. of Material Today: Proceedings, International Conference on Advances in Materials and Manufacturing Application, Bangaluru, 2020, pp. 825-834.
https://doi.org/10.1016/j.matpr.2020.04.391

Singh, M., Ramkumar, J., Rao, R. V., Balic, J.: Experimental Investigation and Multi-objective Optimization of Micro-wire Electrical Discharge Machining of a Titanium Alloy using Jaya Algorithm. Advances in Production Engineering and Management, Vol. 14, n. 2, pp. 251-263, 2019.
https://doi.org/10.14743/apem2019.2.326

J. Kennedy, R. Eberhart, Particle Swarm Optimization, Proc. of the IEEE International Conf. on Neural networks, 1995, pp. 1942-1948.

M. Clerc, J. Kennedy, The Particle Swarm-Explosion, Stability, and Convergence in a Multidimensional Complex Space. IEEE Transactions on Evolutionary Computation, Vol. 6, n. 1, pp. 58-73, 2002.
https://doi.org/10.1109/4235.985692

K. Hussain, M.N.M. Salleh, S. Cheng, R. Naseem, Common Benchmark Functions for Metaheuristic Evaluation: A Review. International Journal on Informatics Visualization, Vol. 1, n. 4-2, pp. 218-223, 2017.
https://doi.org/10.30630/joiv.1.4-2.65

A. Devineni, AWSJ cutting of glass - An experimental study of the effect of process parameters on the depth of cut and kerf width using DOE, Proc. International Conf. on Mechanical and Electrical Technology, pp. 15-19, 2010.
https://doi.org/10.1109/ICMET.2010.5598481


Refbacks

  • There are currently no refbacks.


Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize