Experimental Studies of the Physical Model of the Milling-Rotary Snow Cleaner

Mikhail Doudkin; Alina Kim; Bekbolat Moldakhanov; Gennady Kustarev; Nikita Andryukhov; Valery Rogovsky; Yelena Doudkina

doi:10.15866/ireme.v15i9.20952

Experimental Studies of the Physical Model of the Milling-Rotary Snow Cleaner

Mikhail Doudkin⁽¹⁾, Alina Kim^(2*), Bekbolat Moldakhanov⁽³⁾, Gennady Kustarev⁽⁴⁾, Nikita Andryukhov⁽⁵⁾, Valery Rogovsky⁽⁶⁾, Yelena Doudkina⁽⁷⁾

^(*) Corresponding author

Authors' affiliations

DOI: https://doi.org/10.15866/ireme.v15i9.20952

Abstract

The article discusses the problem of minimizing the specific energy consumption of the working process of the snowplow milling-rotary equipment in order to determine its rational geometric and design parameters and operating modes. The article describes an experimental study of the milling feeder interaction of the physical model of a snowplow with the developed snow mass, carried out on a material equivalent to snow, the influence of geometric parameters and operating modes of the milling feeder on the energy indicators of the massif development is determined. The problem of minimizing the specific energy consumption of the cutter working process has been solved in order to determine rational geometric parameters and operating modes. This research is funded by the Science Committee of the Ministry of Education and Science of the Republic of Kazakhstan (Grant No. AP09260192 Development of innovative milling-rotary snow-clearing working equipment with increased efficiency»).
Copyright © 2021 Praise Worthy Prize - All rights reserved.

Keywords

Snow; Snow Blockages; Rotary-Milling Snow Blowers; Drawing Prism; Screw Feeder; Helical Tilt Angle

Full Text:

PDF

References

Doudkin, M., Kim, A., Savelyev, A., Zhileikin, M., Gribb, V., Mikhailovskaya, V., Modernization of the Metal Structure of the Grader Working Equipment, (2020) International Review of Mechanical Engineering (IREME), 14 (1), pp. 1-8.
https://doi.org/10.15866/ireme.v14i1.17990

Surashev, N., Yelemes, D., Dudkin, M., Kalieva, A. The planetary vibroexciter with elliptic inner race. Advanced Materials Research 694 697, 2019, pp. 229-232.
https://doi.org/10.4028/www.scientific.net/AMR.694-697.229

Saveliev A., Zhileykin M., Mikhailovskaya V., Doudkin M., Kim A., Mlynczak M., Kustarev G., Grib V. Increasing the reliability of the autograder metal construction by modeling and re-assembling of the working equipment. News of the National Academy of Sciences of the Republic of Kazakhstan, Series of Geology and Technical Sciences, Vol. 6, Issue 438, 2019, p. 276-286.
https://doi.org/10.32014/2019.2518-170X.179

B. O. Bostanov, E. S. Temirbekov, M. V. Dudkin, and A. I. Kim. Mechanics-Mathematical Model of Conjugation of a Part of a Trajectory with Conditions of Continuity, Touch and Smoothness. Communications in computer and information science, Vol. 998, 2019, p. 71-81.
https://doi.org/10.1007/978-3-030-12203-4_8

K. K. Kombayev, M. V. Doudkin, A. I. Kim, M. Mlynczak, B. K. Rakhadilov. Surface hardening of the aluminum alloys AL3 by electrolytic-plasma treatment. News of the national academy of sciences of the republic of Kazakhstan series of geology and technical sciences. Volume 4, Number 436 (2019), pp. 222- 229.
https://doi.org/10.32014/2019.2518-170X.117

Doudkin M., Apshikur B., Kim A., Ipalakov T., Asangaliyev E., Mlynczak M. Development of an installation for shear ground testing in the railway track construction. News of the National Academy of Sciences of the Republic of Kazakhstan, Series of Geology and Technical Sciences, Vol. 6, Issue 438,2019, p. 22-35.
https://doi.org/10.32014/2019.2518-170X.152

Doudkin M., Apshikur B., Kim A., Ipalakov T., Asangaliyev E., Mlynczak M., Tungushbayeva Z. Development of mathematical models describing the processes occurring in the railway track construction as a whole, or in the work of its individual elements. News of the National Academy of Sciences of the Republic of Kazakhstan, Series of Geology and Technical Sciences, Vol. 5, Issue 437, 2019, p. 6-15.
https://doi.org/10.32014/2019.2518-170X.120

Doudkin M., Kim A., Guryanov G., Mlynczak M., Eleukenov M., Bugaev A., Rogovsky V. Process modeling and experimental verification of the conditions of ice coverage destruction of automobile roads. Journal of Mechanical Engineering Research and Developments (JMERD), Vol.42, No. 4, 2019, p. 01-08.
https://doi.org/10.26480/jmerd.04.2019.01.08

Doudkin M., Kim A., Kim V., Mlynczak M., Kustarev G. Computer Modeling Application for Analysis of Stress-strain State of Vibroscreen Feed Elements by Finite Elements Method. Communications in computer and information science, Vol. 998, 2019, p. 82-96.
https://doi.org/10.1007/978-3-030-12203-4_9

Doudkin M., Kim A., Kim V. Application of FEM Method for Modeling and Strength Analysis of Feed Elements of Vibroscreen. Lecture notes in mechanical engineering, 2019, p. 155-162.
https://doi.org/10.1007/978-3-030-04975-1_19

Kostov, B., Impact of Cold Water Temperature Variation on the Energy Efficiency of a Water Supply Pump System with Variable Demand, (2018) International Review of Mechanical Engineering (IREME), 12 (7), pp. 604-611.
https://doi.org/10.15866/ireme.v12i7.14953

Harinaldi, H., Budiarso, B., Megawanto, F., Karim, R., Bunga, N., Julian, J., Flow Separation Delay on NACA 4415 Airfoil Using Plasma Actuator Effect, (2019) International Review of Aerospace Engineering (IREASE), 12 (4), pp. 180-186.
https://doi.org/10.15866/irease.v12i4.16219

Némethová, H., Neštrák, D., Čekanová, A., Rozenberg, R., Internal and External Factors Increasing the Error Rate of ATCO Students' Performance, (2021) International Review of Aerospace Engineering (IREASE), 14 (1), pp. 1-7.
https://doi.org/10.15866/irease.v14i1.19804

Mendoza Casseres, D., Valencia, G., Duarte Forero, J., In-Cylinder Pressure Signal Processing Applied to the Diagnosis of Combustion in Low Displacement Diesel Engine, (2020) International Journal on Communications Antenna and Propagation (IRECAP), 10 (2), pp. 137-144.
https://doi.org/10.15866/irecap.v10i2.18640

Tonon, D., Garcia, E., Thermodynamic Analysis of a Spark Ignition Internal Combustion Engines by Computational Simulations, (2018) International Review of Mechanical Engineering (IREME), 12 (8), pp. 705-713.
https://doi.org/10.15866/ireme.v12i8.15082

Hawashin, D., Alkhateri, M., Alnuaimi, N., Saif, F., Omer, Z., Shareef, H., Performance Evaluation of Recent Metaheuristic Optimization Algorithms for Photovoltaic System Parameter Extraction, (2021) International Review of Electrical Engineering (IREE), 16 (1), pp. 60-67.
https://doi.org/10.15866/iree.v16i1.18955

Boote, D., Vergassola, G., Di Matteo, V., Strength Analysis of Superyacht Superstructures with Large Openings, (2017) International Review of Mechanical Engineering (IREME), 11 (1), pp. 1-9.
https://doi.org/10.15866/ireme.v11i1.9289

Aleshkov D.S. Geometric and kinematic characteristics of feeder and thrower of milling and rotary snowblower. The Russian Automobile and Highway Industry Journal. Vol. 15, no. 5. 2018. Continuous issue - 63. Omsk, Russia, pр. 638-648.
https://doi.org/10.26518/2071-7296-2018-5-638-648

Mulak, D., Gaume, J. Numerical investigation of the mixed-mode failure of snow. Computational Particle Mechanics, volume 6, pages 439-447 (2019).
https://doi.org/10.1007/s40571-019-00224-5

Birkeland Karl W., van Herwijnen A., Reuter B., Bergfeld B. Temporal changes in the mechanical properties of snow related to crack propagation after loading. Cold Regions Science and Technology. Volume 159, March 2019, Pages 142-152.
https://doi.org/10.1016/j.coldregions.2018.11.007

Siyang Huang, Yan Huang, Jianqiao Sun. Experimental Investigations on Snow Cover Effect on the Navigating Resistance of an Icebreaker. The 29th International Ocean and Polar Engineering Conference, June 16-21, 2019. Honolulu, Hawaii, USA.

Temirbekov, E.S., Bostanov, B.O., Dudkin, M.V., Kaimov, S.T., Kaimov, A.T. Combined trajectory of continuous curvature. Mechanisms and Machine Science 68, 2019, pp. 12-19.
https://doi.org/10.1007/978-3-030-03320-0_2

Vavilov A., Kim A., Guryanov G., Likunov A. New Technology of The Steel Fiber Manufacturing From Technogenic Waste. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) Vol. 10, Issue 3, Jun 2020, 611-622

Alina Kim, Mikhail Doudkin, Alexandr Ermilov, Gennadiy Kustarev, Murat Sakimov, Marek Mlynczak. Analysis of vibroexciters working process of the improved efficiency for ice breaking, construction and road machines. Journal of vibroengineering. May 2020. Volume 22, issue 3, 465-485
https://doi.org/10.21595/jve.2020.20446

Doudkin, M., Kim, A., Młyńczak, M., Kustarev, G., Kim, V. Development and parameter justification of vibroscreen feed elements. Mining Machines and Earth-Moving Equipment: Problems of Design, Research and Maintenance, 203-226
https://doi.org/10.1007/978-3-030-25478-0_10

Doudkin, M., Kim, A., Moldakhanov, B., Determination of Forces in the Working Unit of the Milling-Rotary Snow Cleaner, (2021) International Review of Mechanical Engineering (IREME), 15 (2), pp. 96-105.
https://doi.org/10.15866/ireme.v15i2.20859

Refbacks

There are currently no refbacks.

Username
Password
Remember me