Influence of Partial Replacement of Cement by Various Percentage of Scoria in Self-Compacting Concrete on Thermal Conductivity in the Jordan Building Construction for Energy Saving
(*) Corresponding author
DOI: https://doi.org/10.15866/ireme.v15i7.20929
Abstract
The objective of this study has been to investigate the effect partial percentages of Scoria on Self-Compacting Concrete (SCC) in order to evaluate thermal conductivity in the Jordan building construction. The mechanical properties slump flow test, the compressive strength, the thermal conductivity (k-value) values, and the expected model for energy performance have been assessed. The slump flow test has revealed that the workability of fresh concrete has increased with increased partial replacement of scoria and vice versa. The compressive strength result has indicated that the maximum compressive strength obtained at 25% replacement has been 49.78 MPa. The thermal conductivity (k-value) result has showed that inversely proportional to the connection between scoria ratio and concrete thermal conductivity, indicating increases an insulating effect by reducing the thermal conductivity from 6.2 to 3.3 W/m K. as well as influence of scoria in the SCC is a suitable option for energy performance in the construction of buildings.
Copyright © 2021 Praise Worthy Prize - All rights reserved.
Keywords
Full Text:
PDFReferences
Ahmad O. Hasan, Ahmed I. Osman, Ala'a H. Al-Muhtaseb, Hani Al-Rawashdeh, Ahmad Abu-jrai, Riad Ahmad, Mohamed R. Gomaa, Tanmay J. Deka, David W. Rooney. An experimental study of engine characteristics and tailpipe emissions from modern DI diesel engine fuelled with methanol/diesel blends. Fuel Processing Technology 220 (2021) 106901.
https://doi.org/10.1016/j.fuproc.2021.106901
Mohamed R. Gomaa, Hegazy Rezk, Ramadan J. Mustafa, Mujahed Al-Dhaifallah. Evaluating the Environmental Impacts and Energy Performance of a Wind Farm System Utilizing the Life-Cycle Assessment Method: A Practical Case Study. Energies 2019, 12 (17), 3263.
https://doi.org/10.3390/en12173263
Mohamed R. Gomaa, Nesrien Al-Dmour, Hani A. AL-Rawashdeh, Mohammad Shalby. Theoretical model of a fluidized bed solar reactor design with the aid of MCRT method and synthesis gas production. Renewable Energy 148 (2020) 91-102.
https://doi.org/10.1016/j.renene.2019.12.010
Mohamed R. Gomaa, Ramadan J. Mustafa, Nesrien Al-Dmour. Solar Thermochemical Conversion of Carbonaceous Materials into Syngas by Co-Gasification. Journal of Cleaner Production (2020), 248, 119185
https://doi.org/10.1016/j.jclepro.2019.119185
Mohamed R. Gomaa, Mujahed Al-Dhaifallah, Ali Alahmer, Hegazy Rezk. Design, Modeling and Experimental Investigation of Active Water Cooling Concentrating Photovoltaic System. Sustainability 2020, 12(13), 5392.
https://doi.org/10.3390/su12135392
Saha, S. and Rajasekaran, C. (2016), Mechanical properties of recycled aggregate concrete produced with Portland Pozzolana Cement, Adv. Concrete Constr., 4(1), 27-35.
https://doi.org/10.12989/acc.2016.4.1.027
Abdessamed, A.R., Mohamed, C., Amina, A.B. (2020), Rheological, physico-mechanical and durability properties of multi-recycled concrete. Advances in Concrete Construction, 9(1), 9-22.
Mustafa, R., Al-Rawashdeh, H., Hassan, A., Gomaa, M., Enhancement of a Hydrogen Engine Cavitation Utilizing Mixed Fuel: a Review and Experimental Case Study, (2020) International Review of Mechanical Engineering (IREME), 14 (1), pp. 33-42.
https://doi.org/10.15866/ireme.v14i1.17311
Al-Rawashdeh, H., Behiri, M., Mustafa, R., Hassan, A., Efficiency and Exergy Enhancement of ORC Powered by Recovering Flue Gases-Heat System in Cement Industrials: a Case Study, (2019) International Review of Mechanical Engineering (IREME), 13 (3), pp. 185-197.
https://doi.org/10.15866/ireme.v13i3.16713
Okamura, H., Ouchi, M., (2003), Applications of self-compacting concrete in Japan. The 3rd International RILEM Symposium on Self-Compacting Concrete. Wallevik OH, Nielsson I, editors, RILEM Publications SARL, Bagneux, France, 3-5.
Al-Hwaiti, M. (2015), Influence of treated waste phosphogypsum materials on the properties of Ordinary Portland Cement. Bangladesh J. Sci. Ind. Res., 50(4), 241-250.
https://doi.org/10.3329/bjsir.v50i4.25831
Yahiaoui, W., Kenai, S., Menadi, B. and Kadri, E. (2017), Durability of self-compacted concrete containing slag in hot climate, Adv. Concrete Constr., 5(3), 271-288.
Meesaraganda, L.V., Saha, P., Laskar, A.I. (2018), Behaviour of self-compacting reinforced concrete beams strengthened with hybrid fiber under static and cyclic loading. International Journal of Civil Engineering 16, 169-178.
https://doi.org/10.1007/s40999-016-0114-2
Su, N., Hsu, K.C., Chai, H.W. (2001), A simple mix design method for self-compacting concrete. Cement and concrete research, 31, 1799-1807.
https://doi.org/10.1016/S0008-8846(01)00566-X
Ye, G., Liu, X., De Schutter, G. (2007), Influence of limestone powder used as filler in SCC on hydration and microstructure of cement pastes. Cement and Concrete Composites, 29, 94-102.
https://doi.org/10.1016/j.cemconcomp.2006.09.003
Grdic', Z., Despotovic', I., Toplicic-Curcic', G. (2008), Properties of self-compacting concrete with different types of additives. Facta universitatis-series: Architecture and Civil Engineering 6, 173-177.
https://doi.org/10.2298/FUACE0802173G
Girish, S., Ranganath R.V., Vengala J. (2010), Influence of powder and paste on flow properties of SCC. Construction and Building materials, 24, 2481-2488.
https://doi.org/10.1016/j.conbuildmat.2010.06.008
Heba A.M. (2011), Effect of fly ash and silica fume on compressive strength of self-compacting concrete under different curing conditions. Ain Shams Engineering Journal, 2, 79-86.
https://doi.org/10.1016/j.asej.2011.06.001
Quercia, G., Spiesz, P., Husken, G., Brouwers, H. (2014), SCC modification by use of amorphous nano-silica. Cement and Concrete Composites, 45, 69-81.
https://doi.org/10.1016/j.cemconcomp.2013.09.001
Schwartzentruber, L.A., Leroy, R., Cordin J. (2006), Rheological behaviour of fresh cement pastes formulated from a Self-Compacting Concrete (SCC). Cement and Concrete Research, 36, 1203-1213.
https://doi.org/10.1016/j.cemconres.2004.10.036
Chandra, S., Bjornstrom, J. (2002). Influence of cement and superplasticizers type and dosage on the fluidity of cement mortars-Part I. Cement and Concrete Research, 32, 1605-1611.
https://doi.org/10.1016/S0008-8846(02)00839-6
Bagrade, M.A., Satone, S. (2012), An experimental investigation of partial replacement of cement by various percentage of Phosphogypsum in cement concrete, International Journal of Engineering Research and Applications (IJERA) ISSN, 2248-9622.
Al-Sibahy A., Edwards R., (2012), Thermal behaviour of novel lightweight concrete at ambient and elevated temperatures: experimental, modelling and parametric studies. Construction and Building Materials, 31, 174-187.
https://doi.org/10.1016/j.conbuildmat.2011.12.096
Grieu, S., Faugeroux, O., Traore, A., (2011), Artificial intelligence tools and inverse methods for estimating the thermal diffusivity of building materials. Energy and Buildings, 43, 543-554.
https://doi.org/10.1016/j.enbuild.2010.10.020
Mourhly A., Khachani M., Hamidi A.E. 2015. The synthesis and characterization of low-cost mesoporous silica SiO2 from local pumice rock. Nanomaterials and Nanotechnology 5, 35.
https://doi.org/10.5772/62033
Zhang W., Min H., Gu X. (2015), Mesoscale model for thermal conductivity of concrete. Construction and Building Materials, 98, 8-16.
https://doi.org/10.1016/j.conbuildmat.2015.08.106
Qureshi, L. A., Ali, B. & Ali, A. 2020. Combined Effects of Supplementary Cementitious Materials (Silica Fume, Ggbs, Fly Ash and Rice Husk Ash) And Steel Fiber On the Hardened Properties of Recycled Aggregate Concrete. Construction and Building Materials, 263, 120636.
https://doi.org/10.1016/j.conbuildmat.2020.120636
Nuroji, N., Hung, C., Prasetya, B., Han, A., The Behavior of Reinforced Concrete Members with Section Enlargement Using Self-Compacting Concrete, (2020) International Review of Civil Engineering (IRECE), 11 (3), pp. 121-126.
https://doi.org/10.15866/irece.v11i3.18574
Mangi, S., Memon, Z., Khahro, S., Memon, R., Memon, A., Potentiality of Industrial Waste as Supplementary Cementitious Material in Concrete Production, (2020) International Review of Civil Engineering (IRECE), 11 (5), pp. 214-221.
https://doi.org/10.15866/irece.v11i5.18779
Kherraf, L., Belachia, M., Hebhoub, H., Abdelouehed, A., Effects of the Incorporation of Combined Additions in Cement on the Properties of Concretes, (2018) International Review of Civil Engineering (IRECE), 9 (1), pp. 31-39.
https://doi.org/10.15866/irece.v9i1.14315
Zakham, N., Ammari, A., El Rhaffari, Y., Cherraj, M., Bouabid, H., Gueraoui, K., Samaouali, A., The Effect of Cement Content on the Thermo-Mechanical Performance of Compressed Earth Block, (2020) International Review of Civil Engineering (IRECE), 11 (6), pp. 249-256.
https://doi.org/10.15866/irece.v11i6.17438
Pizoń, J., Gołaszewski, J., Alwaeli, M. & Szwan, P. 2020. Properties of Concrete with Recycled Concrete Aggregate Containing Metallurgical Sludge Waste. Materials, 13, 1448.
https://doi.org/10.3390/ma13061448
Cajka, R., Marcalikova, Z., Bilek, V. & Sucharda, O. 2020. Numerical Modeling and Analysis of Concrete Slabs in Interaction with Subsoil. Sustainability, 12, 9868.
https://doi.org/10.3390/su12239868
Marcalikova, Z., Sucharda, O., Modeling of Fiber-Reinforced Concrete and Finite Element Method, (2021) International Review of Civil Engineering (IRECE), 12 (1), pp. 11-19.
https://doi.org/10.15866/irece.v12i1.18636
Saeed, I., Mohammed, T., Jihad, S., Partial Replacement of Sand with Attapulgite in Concrete, (2020) International Review of Civil Engineering (IRECE), 11 (2), pp. 73-79.
https://doi.org/10.15866/irece.v11i2.17092
Belarouf, S., Samaouali, A., Gueraoui, K., Rahier, H., Mechanical Properties of Concrete with Recycled Concrete Aggregates, (2020) International Review of Civil Engineering (IRECE), 11 (6), pp. 268-274.
https://doi.org/10.15866/irece.v11i6.18478
Alymac K.E., Aydin A.B. (2015), Concrete properties containing fine aggregate marble powder. KSCE Journal of Civil Engineering, 19, 2208-2216.
https://doi.org/10.1007/s12205-015-0327-y
Khan, M. (2002), Factors affecting the thermal properties of concrete and applicability of its prediction models. Building and Environment, 37, 607-614.
https://doi.org/10.1016/S0360-1323(01)00061-0
Tam V.W., Gao X., Tam C.M. (2009), Physio-chemical reactions in recycle aggregate concrete. Journal of Hazardous Materials, 163, 823-828.
https://doi.org/10.1016/j.jhazmat.2008.07.031
Silva, Y.F., Robayo, R.A., Mattey, P.E. (2016), Properties of self-compacting concrete on fresh and hardened with residue of masonry and recycled concrete. Construction and Building Materials 124, 639-644.
https://doi.org/10.1016/j.conbuildmat.2016.07.057
Nuroji, N., Hung, C., Prasetya, B., Han, A., The Behavior of Reinforced Concrete Members with Section Enlargement Using Self-Compacting Concrete, (2020) International Review of Civil Engineering (IRECE), 11 (3), pp. 121-126.
https://doi.org/10.15866/irece.v11i3.18574
Khan, M., Ali M. (2018), Effect of super plasticizer on the properties of medium strength concrete prepared with coconut fiber. Construction and Building Materials, 182, 703-715.
https://doi.org/10.1016/j.conbuildmat.2018.06.150
Alzoubi, H.H., Al-Olaimat, D.J., (2019), The Effect of Using Naphthalene and Local Soil with Concrete Mixture on Thermal Conductivity, Case of Mafraq City-Jordan. Journal of Ecological Engineering, 20.
https://doi.org/10.12911/22998993/102615
European (2005), Guidelines for Self-Compacting Concrete. BIBM, 22.
Dubois, S., Lebeau, F. (2015), Design, construction and validation of a guarded hot plate apparatus for thermal conductivity measurement of high thickness crop-based specimens. Materials and Structures, 48, 407-421.
https://doi.org/10.1617/s11527-013-0192-4
Asadi, I., Shafigh, P., Hassan, Z.F.B.A., Mahyudin, N.B. (2018). Thermal conductivity of concrete-A review. Journal of Building Engineering, 20, 81-93.
https://doi.org/10.1016/j.jobe.2018.07.002
EFNARC (2002), Specifications and guidelines for self-compacting concrete.
Hassanpour, M., Shafigh, P., Mahmud, H.B. (2012), Lightweight aggregate concrete fiber reinforcement-a review. Construction and Building Materials, 37, 452-461.
https://doi.org/10.1016/j.conbuildmat.2012.07.071
Real, S., Gomes, M. G., Rodriguesetal, A. M. (2016), Contribution of structural lightweight aggregate concrete to the reduction of thermal bridging effect in buildings. Construction and Building Materials, 121, 460-470.
https://doi.org/10.1016/j.conbuildmat.2016.06.018
Refbacks
- There are currently no refbacks.
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize