Open Access Open Access  Restricted Access Subscription or Fee Access

Effects of Temperature and Turbulence on Characteristics and Morphological Variations of Urea Deposits in Urea-SCR Systems. A Study Using SEM and XRD


(*) Corresponding author


Authors' affiliations


DOI: https://doi.org/10.15866/ireme.v15i4.20406

Abstract


The Urea-Water Solution (UWS) is sprayed into the diesel engine exhaust gases of automobiles in order to generate reducing agent NH3 in Urea-Selective Catalytic Reduction (SCR) systems adopted to diesel engines of modern automobiles to mitigate oxides of nitrogen (NOx). Although it is a very efficient technique, deposit formation at low temperatures is a major concern. The growth of deposits not only reduces the efficiency of NH3 generation but also generates non-depleting complex compounds. The temperature of exhaust gas and the Reynolds number of the flow have significant effects on this deposit formation. In this study, the compositional variation and the crystallinity of the deposits are investigated using Energy Dispersive X-ray Spectroscopy (EDX) and X-ray diffraction analysis (XRD) with respect to variation in temperature and flow rate at the preliminary stage. The elemental analysis is done for different samples using EDX that indicates urea as a major constituent in most of the deposits for a temperature range of 423-523K for overdosed conditions. The XRD results indicate the evolution of various traces of urea-related compounds at different temperatures and for turbulent flow of Reynolds Number 9000-32000. Using Scanning Electron Microscopy (SEM), the morphological variations of the deposits have been studied for various temperature and flow conditions. The comparative study of the morphology of deposits during the initial stages of deposit formation indicates an extent to which growth can occur and probable areas of deposits for further growth.
Copyright © 2021 Praise Worthy Prize - All rights reserved.

Keywords


SCR; Deposit Formation; Temperature; Flow Rate; SEM

Full Text:

PDF


References


M. Koebel and E. O. Strutz, Thermal and hydrolytic decomposition of urea for automotive selective catalytic reduction systems: Thermochemical and practical aspects, Ind. Eng. Chem. Res., vol. 42, no. 10, pp. 2093-2100, 2003.
https://doi.org/10.1021/ie020950o

Miroslav Radojevic, Reduction of nitrogen oxides in flue gases, Environmental Pollution, Volume 102, Issue 1, Supplement 1, 1998, Pages 685-689, ISSN 0269-7491.
https://doi.org/10.1016/S0269-7491(98)80099-7

H. L. Fang and H. F. M. DaCosta, Urea thermolysis and NOx reduction with and without SCR catalysts, Appl. Catal. B Environ., vol. 46, no. 1, pp. 17-34, 2003.
https://doi.org/10.1016/S0926-3373(03)00177-2

G. Zheng, A. Fila, A. Kotrba, and R. Floyd, Investigation of Urea Deposits in Urea SCR Systems for Medium and Heavy Duty Trucks, SAE Tech. Pap., 2010.
https://doi.org/10.4271/2010-01-1941

A. Varna, A. C. Spiteri, Y. M. Wright, P. Dimopoulos Eggenschwiler, and K. Boulouchos, Experimental and numerical assessment of impingement and mixing of urea-water sprays for nitric oxide reduction in diesel exhaust, Appl. Energy, vol. 157, no. APRIL, pp. 824-837, 2015.
https://doi.org/10.1016/j.apenergy.2015.03.015

G. M. H. Shahariar and O. T. Lim, A study on urea-water solution spray-wall impingement process and solid deposit formation in urea-scr de-nox system, Energies, vol. 12, no. 1, 2019.
https://doi.org/10.3390/en12010125

P. M. Schaber, J. Colson, S. Higgins, D. Thielen, B. Anspach, and J. Brauer, Thermal decomposition (pyrolysis) of urea in an open reaction vessel, Thermochim. Acta, vol. 424, no. 1-2, pp. 131-142, 2004.
https://doi.org/10.1016/j.tca.2004.05.018

H. Zhang, Y. Xi, C. Su, and Z. G. Liu, Lab Study of Urea Deposit Formation and Chemical Transformation Process of Diesel Aftertreatment System, SAE Tech. Pap., vol. 2017-March, no. March, 2017.
https://doi.org/10.4271/2017-01-0915

L. Xu et al., Laboratory and Engine Study of Urea-Related Deposits in Diesel Urea-SCR After-Treatment Systems, SAE Tech. Pap. 2007-01-1582, 2007.
https://doi.org/10.4271/2007-01-1582

Luigi Stradella, Massimo Argentero, A study of the thermal decomposition of urea, of related compounds and thiourea using DSC and TG-EGA, Thermochimica Acta, Volume 219, 1993, Pages 315-323, ISSN 0040-6031.
https://doi.org/10.1016/0040-6031(93)80508-8

Papadogianni, V., Romeos, A., Perrakis, K., Panidis, T., Thermal Decomposition and Fire Behavior of Carbon Fiber/Nomex Honeycomb Composite, (2021) International Review of Mechanical Engineering (IREME), 15 (1), pp. 1-12.
https://doi.org/10.15866/ireme.v15i1.20207

S. Bai, S. Lang, K. Yuan, Y. Liu, and G. Li, Experimental Study of Urea Depositions in Urea-SCR System, Adv. Mater. Res., vol. 937, pp. 74-79, 2014.
https://doi.org/10.4028/www.scientific.net/AMR.937.74

K. I. Jian Ping Chen, Thermal Decomposition of Urea and its derivatives by simultaneous TG/DTA/MS, J. Mass Spectrom. Soc. JapanVol, vol. 46, no. 4, 1998.
https://doi.org/10.5702/massspec.46.299

Y. Liao, P. Dimopoulos Eggenschwiler, D. Rentsch, F. Curto, and K. Boulouchos, Characterization of the urea-water spray impingement in diesel selective catalytic reduction systems, Appl. Energy, vol. 205, no. August, pp. 964-975, 2017.
https://doi.org/10.1016/j.apenergy.2017.08.088

M. Börnhorst, S. Langheck, H. Weickenmeier, C. Dem, R. Suntz, and O. Deutschmann, Characterization of solid deposits from urea water solution injected into a hot gas test rig, Chem. Eng. J., vol. 377, no. 1 December, p. 119855, 2019.
https://doi.org/10.1016/j.cej.2018.09.016

H. Smith et al., Analytical Investigation of Urea Deposits in SCR System, SAE Int. J. Fuels Lubr., vol. 2, no. 2, pp. 612-626, 2014.
https://doi.org/10.4271/2015-01-1037

C. L. Weeks, D. R. Ibeling, S. Han, L. Ludwig, and P. Ayyappan, Analytical Investigation of Urea Deposits in SCR System, SAE Int. J. Engines, vol. 8, no. 3, pp. 2015-01-1037, 2015.
https://doi.org/10.4271/2015-01-1037

V. O. Strots, S. Santhanam, B. J. Adelman, G. a. Griffin, and E. M. Derybowski, Deposit Formation in Urea-SCR Systems, SAE Int. J. Fuels Lubr., vol. 2, no. 2, pp. 283-289, 2009.
https://doi.org/10.4271/2009-01-2780

S. Sadashiva Prabhu, N. S. Nayak, N. Kapilan, and V. Hindasageri, An experimental and numerical study on effects of exhaust gas temperature and flow rate on deposit formation in Urea-Selective Catalytic Reduction (SCR) system of modern automobiles, Appl. Therm. Eng., vol. 111, no. x, pp. 1211-1231, 2017.
https://doi.org/10.1016/j.applthermaleng.2016.09.134

S. Eakle, S. Kroll, and C. Henry, Investigation of Urea Derived Deposits Composition in SCR Systems, SAE Tech. Pap. 2016-01-0989, 2016.
https://doi.org/10.4271/2016-01-2327

H. Smith, T. Lauer, M. Mayer, and S. Pierson, Optical and Numerical Investigations on the Mechanisms of Deposit Formation in SCR Systems, SAE Int. J. Fuels Lubr., vol. 7, no. 2, pp. 525-542, 2014.
https://doi.org/10.4271/2014-01-1563

S. Grout, J. B. Blaisot, K. Pajot, and G. Osbat, Experimental investigation on the injection of an urea-water solution in hot air stream for the SCR application: Evaporation and spray/wall interaction, Fuel, vol. 106, no. x, pp. 166-177, 2013.
https://doi.org/10.1016/j.fuel.2012.09.022

V. Betageri and M. Rajagopalan, Effects of Diesel Exhaust Fluid (DEF) Injection Configurations on Deposit Formation in the SCR System of a Diesel Engine, SAE Tech. Pap. 2016-28-0109, 2016.
https://doi.org/10.4271/2016-28-0109

W. Brack, B. Heine, F. Birkhold, M. Kruse, and O. Deutschmann, Formation of Urea-Based Deposits in an Exhaust System : Numerical Predictions and Experimental Observations on a Hot Gas Test Bench, Emiss. Control Sci. Technol., pp. 115-123, 2016.
https://doi.org/10.1007/s40825-016-0042-2

. Sadashiva Prabhu, N. S. Nayak, and N. Kapilan, Characteristics of deposit formation in scr system for varying temperature and flow rate of exhaust gases -a study using xrd, Int. J. Mech. Prod. Eng. Res. Dev., vol. 10, no. 2, pp. 689-700, 2020.
https://doi.org/10.24247/ijmperdapr202068

M. Börnhorst, C. Kuntz, S. Tischer, and O. Deutschmann, Urea derived deposits in diesel exhaust gas after-treatment: Integration of urea decomposition kinetics into a CFD simulation, Chem. Eng. Sci., vol. 211, p. 115319, 2020.
https://doi.org/10.1016/j.ces.2019.115319

U. Budziankou, M. Börnhorst, C. Kuntz, O. Deutschmann, and T. Lauer, Deposit Formation from Urea Injection: a Comprehensive Modeling Approach, Emiss. Control Sci. Technol., vol. 6, no. 2, pp. 211-227, 2020.
https://doi.org/10.1007/s40825-020-00159-x

S. Tischer, M. Bo, and J. Amsler, decomposition †, Phys. Chem. Chem. Phys, vol. 2019, 21, no. 21, pp. 16785-16797, 2019.
https://doi.org/10.1039/C9CP01529A


Refbacks

  • There are currently no refbacks.


Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize