Open Access Open Access  Restricted Access Subscription or Fee Access

Determination of Maintenance Task on Tanker Vessel’s Marine Boiler Using Reliability Centered Maintenance (RCM) II Method


(*) Corresponding author


Authors' affiliations


DOI: https://doi.org/10.15866/ireme.v15i5.19061

Abstract


There are several types of tanker accidents: collision, fire, grounding etc. In fire accident, the major causes of ship accidents are explosions on marine boilers and damage to ship components. In addition to operational factors, maintenance factors are also the major cause of the accident. In this case, consideration is needed to improve the safety factor of the marine to the operational side. It is also needed to develop the maintenance with the Reliability Centered Maintenance (RCM) approach. This study explores the method of maintenance for marine boiler maintenance systems on tankers using the RCM II method. This study also determines the characteristics of asset failure to assist in assessing the level of risk to asset operations. Based on the results of the RCM analysis, it could be seen that there are 128 maintenance tasks consisting of 3 types of activities: Condition Monitoring (CM), planned maintenance (PM) and One-Time Change (OTC). For failure modes that have high risk, preventive maintenance is performed at intervals every 1 to 7 days. For the longest preventive maintenance, intervals carried out on the safety valve are every 2 years.
Copyright © 2021 Praise Worthy Prize - All rights reserved.

Keywords


Maintenance; Marine Boiler; RCM; Ship Accident

Full Text:

PDF


References


Baalisampang, T.; Abbassi, R.; Garaniya, V.; Khan, F.; Dadashzadeh, M. Review and analysis of fire and explosion accidents in maritime transportation. Ocean Eng. 2018,158, 350-366.
https://doi.org/10.1016/j.oceaneng.2018.04.022

F. Corvaro, G. Giacchetta, B. Marchetti, and M. Recanati, Reliability, Availability, Maintainability (RAM) study, on reciprocating compressors API 618. Petroleum, Vol. 3, no. 2, pp. 266-272, 2019.
https://doi.org/10.1016/j.petlm.2016.09.002

U˘gurlu, Ö. Analysis of fire and explosion accidents occurring in tankers transporting hazardous cargoes. Int. J. Ind. Ergon. 2016 , pp.55, 1-11.
https://doi.org/10.1016/j.ergon.2016.06.006

Srinivasan Chandrasekaran and G. Venkata Kiran, Reliability, Availability and Maintainability (RAM) Assessment of a Process Plant, Journal of Adv Research in Dynamical & Control Systems, Vol. 11, no. 10 pp 167-179, 2019.

V. Bianco, M. Szubel, B. Matras, M. Filipowicz, K. Papis, S. Podlasek, CFD analysis and design optimization of an air manifold for a biomass boiler, Renewable Energy, vol. 163, pp. 2018-2028, 2021.
https://doi.org/10.1016/j.renene.2020.10.107

H. Gu, H. Zhu, Y. Cui, F. Si, R. Xue, H. Xi, J. Zhang, Optimized scheme in coal-fired boiler combustion based on information entropy and modified K-prototypes algorithm, Results in Physics, vol. 9, pp. 1262-1274, 2018.
https://doi.org/10.1016/j.rinp.2018.04.045

Moubray, John. Reliability-Centered Maintenance II. London : Butterworth-Heinemann Ltd., 1997.

R. Shaneza F, T. Pitana, N. Siswantoro, Reviewing the RCM on Cooling Water Pump of LNG Production Company, International Journal of Marine Engineering Innovation and Research, Vol. 3, n 3, pp. 109-117, 2019.

American Bureau of Shipping. Guide for Surveys Based on Machinery Reliability and Maintenance Techniques. Houston: American Bureau of Shipping, 2016.

Q. Wang, Z. Chen, J. Wang, L. Zeng, X. Zhang, X. Li, Z. Li, Effects Of Secondary Air Distribution In Primary Combustion Zone On Combustion And NOx Emissions Of S Large Scale Down Fired Boiler With Air Staging, Energy, vol. 165, pp. 399-410, 2018.
https://doi.org/10.1016/j.energy.2018.09.194

H. Y. Park, J. E. Lee, H. H. Kim, S. Park, S. H. Baek, I. Yee, C. Ryu, Thermal Resistance By Slagging And Its Relationship With Ash Properties For Six Coal Blends In A Commercial Coal Fired Boiler, Fuel, vol. 235, pp. 1377-1386, 2019.
https://doi.org/10.1016/j.fuel.2018.08.134

Y. Wang, J. Jin, D. Liu, H. Yang, X. Kou, Understanding Ash Deposition For Zhundong Coal Combustion In 330MW Utility Boiler: Focusing On Surface Temperature Effects, Fuel, vol. 216, pp. 697-706, 2018.
https://doi.org/10.1016/j.fuel.2017.08.112

W.J. Shi, L.X. Kong, J. Bai, J. Xu, W.C. Li, Z.Q. Bai, W. Li, Effect Of CaO/Fe 2 O 3 On Fusion Behaviors Of Coal Ash At High Temperatures, Fuel Processing Technology, vol. 181, pp. 18-24, 2018.
https://doi.org/10.1016/j.fuproc.2018.09.007

Li, H.; Liu, T.; Wu, X.; Chen, Q. Research on bearing fault feature extraction based on singular valuedecomposition and optimized frequency band entropy. Mech. Syst. Signal Process. 2019,118, 477-502.
https://doi.org/10.1016/j.ymssp.2018.08.056

Glowacz, A. Fault diagnosis of single-phase induction motor based on acoustic signals. Mech. Syst. Signal Process. 2019,117, 65-80.
https://doi.org/10.1016/j.ymssp.2018.07.044

S. Carpitella, A. Certa, J. Izquierdo and C. M. La Fata, A Combined Multi-Criteria Approach to Support FMECA Analyses: A Real-World Case, Reliability Engineering & System Safety, Vol. 169, pp. 394-402, 2018.
https://doi.org/10.1016/j.ress.2017.09.017

Emovon, I.; Norman, R.A.; Murphy, A.J. Elements of maintenance systems and tools for implementationwithin the framework of reliability centred maintenance-A review. J. Mech. Eng. Technol.2016,8, 1-34.

Agarwal, M.; Narayanan, G.A.; Srivastava, P. Risk Prioritization in a Gas Power Plant Using FuzzyInference System. In Proceedings of the 8th International Conference on Cloud Computing, Data Science & Engineering, Nodia, India, 11-12 January 2018; pp. 753-757
https://doi.org/10.1109/CONFLUENCE.2018.8442610

M. Alrifaey, T. S. Hong, E. E. Supeni, A. As'arry and C. K. Ang, Identification and Prioritization of Risk Factors in an Electrical Generator Based on the Hybrid FMEA Framework, Energies, Vol. 12, pp. 1-22, 2019.
https://doi.org/10.3390/en12040649

J. Balaraju, M. G. Raj and C. S. Murthy, Fuzzy-FMEA Risk Evaluation Approach for LHD Machine-A Case Study, Journal of Sustainable Mining, Vol. 18, pp. 257-268, 2019.
https://doi.org/10.1016/j.jsm.2019.08.002

H. Cheung and S. Wang, Reliability and availability assessment and enhancement of water-cooled multi-chiller cooling systems for data centers, Reliability Engineering & System Safety, Vol. 191, pp. 106573, 2019.
https://doi.org/10.1016/j.ress.2019.106573

S. Ahmadi, S. Moosazadeh, M. Hajihassani, H. Moomivand, & M. M. Rajaei, Reliability, availability and maintainability analysis of the conveyor system in mechanized tunneling. Measurement, Vol. 145, pp. 756-764, 2019.
https://doi.org/10.1016/j.measurement.2019.06.009

A. Al-Douri, V. Kazantzi, F.T. Eljack, M. S. Mannan and M. M. El-Halwagi, Mitigation of operational failures via an economic framework of reliability, availability, and maintainability (RAM) during conceptual design, Journal of Loss Prevention in the Process Industries, Vol. 67, pp. 104261, 2020.
https://doi.org/10.1016/j.jlp.2020.104261

H. C. Liu, L. E Wang, X. Y You and S. M. Wu, Failure Mode and Effect Analysis with Extended Grey Relational Analysis Method in Cloud Setting, Total Quality Management & Business Excellence, Vol. 30, n. 7-8, pp. 745-767, 2019.
https://doi.org/10.1080/14783363.2017.1337506

Zaman, MB, Semin, Pitana T, Siswantoro N, Hanugrah F,. Application of Reliability Centered Maintenance For Tugboat Kresna 315 Cooling System. Journal of Southwest Jiaotang University. 2020, 55.4. 1-9.
https://doi.org/10.35741/issn.0258-2724.55.4.51

Siswantoro, N., Semin, S., Zaman, M., Criticality Assessment for Marine Diesel Engine Using Failure Mode and Effect Criticality Analysis (FMECA) Approach: Case Study on Lubricating Oil System, (2020) International Review of Mechanical Engineering (IREME), 14 (4), pp. 258-263.
https://doi.org/10.15866/ireme.v14i4.18060

Paprocka, I. The model of maintenance planning and production scheduling for maximising robustness. Int. J. Prod. Res. 2018, 1-22.

Vishnu, C.R.; Regikumar, V. Reliability Based Maintenance Strategy Selection in Process Plants: A CaseStudy. Procedia Technol. 2016,25, 1080-1087.
https://doi.org/10.1016/j.protcy.2016.08.211

X. Lia, H. Lia, B. Suna and F. Wanga, Assessing Information Security Risk for An Evolving Smart City Based on Fuzzy and Grey FMEA, Journal of Intelligent & Fuzzy Systems, Vol. 34, pp. 2491-2501, 2018.
https://doi.org/10.3233/JIFS-172097

R. Islam, F. Khan, R. Abbassi and V. Garaniya, Human Error Probability Assessment During Maintenance Activities of Marine Systems, Safety and Health at Work, Vol. 9, n. 1, pp. 42-52, 2018.
https://doi.org/10.1016/j.shaw.2017.06.008

K. Zakikhani, F. Nasiri, & T. Zayed, Availability-based reliability-centered maintenance planning for gas transmission pipelines. International Journal of Pressure Vessels and Piping, Vol. 183, pp 104105, 2020.
https://doi.org/10.1016/j.ijpvp.2020.104105

Afolalu, A.S.; Salawu, E.Y.; Kehinde, O.; Samuel, U.A.; Ikechi, V.I.; Remilekun, R.E. Failure Mode and Effect Analysis a Tool for Reliability Evaluation. Eur. J. Eng. Res. Sci. 2018,3, 65-68.
https://doi.org/10.24018/ejers.2018.3.4.636

M. Alrifaey, T. S. Hong, E. E. Supeni, A. As'arry and C. K. Ang, Identification and Prioritization of Risk Factors in an Electrical Generator Based on the Hybrid FMEA Framework, Energies, Vol. 12, pp. 1-22, 2019.
https://doi.org/10.3390/en12040649

K. Antosz, & R. C. Ratnayake, Spare parts' criticality assessment and prioritization for enhancing manufacturing systems' availability and reliability, Journal of Manufacturing Systems, Vol. 50, pp. 212-225, 2019.
https://doi.org/10.1016/j.jmsy.2019.01.003

ABS, ABS Guidance Notes On Reliability-CenteredMaintenance, USA: American Bureau of Shipping, 2004.

ABS, "ABS Guide for Survey Based On Reliability-Centered Maintenance", USA: American Bureau of Shipping, 2003.

A. K. Agrawal, V. M. S. R. Murthy and S. Chattopadhyaya, Investigations into reliability, maintainability and availability of tunnel boring machine operating in mixed ground condition using Markov chains, Engineering Failure Analysis, Vol. 105, pp. 477-489, 2019.
https://doi.org/10.1016/j.engfailanal.2019.07.013

J. Zhang, C. Haskins, Y. Liu, & M. A. Lundteigen, A systems engineering-based approach for framing reliability, availability, and maintainability: A case study for subsea design. Systems Engineering, Vol. 2, no. 6, pp. 576-592, 2018.
https://doi.org/10.1002/sys.21462

Patil, R., Kothavale, B., Failure Modes and Effects Analysis (FMEA) of Computerized Numerical Control (CNC) Turning Center, (2018) International Review of Mechanical Engineering (IREME), 12 (1), pp. 78-87.
https://doi.org/10.15866/ireme.v12i1.14156

Siswantoro, N., Priyanta, D., Zaman, M.B., Semin 2020 Failure mode and effect criticality analysis (FMECA) fuzzy to evaluate critical level on main engine supporting system, IOP Conference Series: Earth and Environmental Science, 557 1 012036.
https://doi.org/10.1088/1755-1315/557/1/012036

Ibrahim, K., Eltuhamy, R., Rady, M., Mahmoud, H., Failure Mode and Effects Analysis of CIGS Thin Film PV Modules Using Thermography Analysis and IV Measurements, (2021) International Journal on Energy Conversion (IRECON), 9 (1), pp. 17-28.
https://doi.org/10.15866/irecon.v9i1.19350

Di Nardo, M., Clericuzio, M., Murino, T., Madonna, M., An Adaptive Resilience Approach for a High Capacity Railway, (2020) International Review of Civil Engineering (IRECE), 11 (3), pp. 98-105.
https://doi.org/10.15866/irece.v11i3.19025

Aswed, G., Mohammed, H., Ahmed, M., Factors Affecting Safety in Construction Projects, (2020) International Review of Civil Engineering (IRECE), 11 (3), pp. 135-140.
https://doi.org/10.15866/irece.v11i3.17142

Fioriti, M., Vercella, V., A Parametric Cost Model for Estimating Civil Aircraft Line and Base Maintenance, (2019) International Review of Aerospace Engineering (IREASE), 12 (6), pp. 250-260.
https://doi.org/10.15866/irease.v12i6.17333

Baradits, G., Madár, J., Abonyi, J., Novel Failure Model for the Purpose of Modeling the Imperfect Proof-Testing, (2018) International Journal on Engineering Applications (IREA), 6 (3), pp. 82-90.
https://doi.org/10.15866/irea.v6i3.15687


Refbacks

  • There are currently no refbacks.


Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize