Open Access Open Access  Restricted Access Subscription or Fee Access

Method and Technology for Continuous Control of Performance and Operating Quality of Automotive and Combine Machinery

Ildar Gabitov(1*), Samat Insafuddinov(2), Ildar Badretdinov(3), Viktor Pavlenko(4), Filyus Safin(5)

(1) Federal State Budgetary Educational Establishment of Higher Education “Bashkir State Agrarian University”, Russian Federation
(2) Federal State Budgetary Educational Establishment of Higher Education “Bashkir State Agrarian University”, Russian Federation
(3) Federal State Budgetary Educational Establishment of Higher Education “Bashkir State Agrarian University”, Russian Federation
(4) Federal State Budgetary Educational Establishment of Higher Education “Bashkir State Agrarian University”, Russian Federation
(5) Federal State Budgetary Educational Establishment of Higher Education “Bashkir State Agrarian University”, Russian Federation
(*) Corresponding author


DOI: https://doi.org/10.15866/ireme.v14i3.18731

Abstract


Directions for the development of diagnostics of domestic automotive and combine machinery are considered in the paper. The target analysis of the current situation was carried out, and perspective directions of agricultural engineering development were defined. Innovative methods and technology of continuous performance (remote diagnostics) and quality control of domestic automotive and agricultural machinery are presented. A distinctive feature of the method is periodically performed remote technical diagnostics and, as a result, early detection and prediction of defects and malfunctions, which contributes to the timely elimination of technical failures during motor maintenance, improving the reliability and efficiency of operation of automotive and combine machinery. The novelty of the proposed technology is remote diagnostics with the use of a continuous diagnostics system, which makes it possible to predict the malfunctioning behavior and recommend measures to change the properties of the exposed object. The system provides both the owner and the service company with information about upcoming events.
Copyright © 2020 Praise Worthy Prize - All rights reserved.

Keywords


Diagnostics; Forecasting; Indicating Test; Controller; Telematics; Automobile; Tractor; Combine; Aggregate

Full Text:

PDF


References


D. S. Buklagin, Development of agricultural machinery testing technologies, International Research Journal 4(46) (2016) 45–51.

doi: https://doi.org/10.18454/IRJ.2016.46.278

E. Cavallo, E. Ferrari, M. Coccia, Likely technological trajectories in agricultural tractors by analysing innovative attitudes of farmers, International Journal of Technology Policy and Management 15(2) (2015) 158–177.
https://doi.org/10.1504/ijtpm.2015.069203

doi: https://doi.org/10.1504/IJTPM.2015.069203

D. Siano, F. Bozza, D. D’Agostino, M.A. Panza, The Use of Vibrational Signals for On-Board Knock Diagnostics Supported by In-Cylinder Pressure Analyses, SAE/JSAE 2014 Small Engine Technology Conference & Exhibition (2014) 2014-32-0063.
https://doi.org/10.4271/2014-32-0063

D. Taraza, Estimation of the Mean Indicated Pressure from Measurements of the Crankshafts Angular Speed Variation, International Off-Highway & Powerplant Congress & Exposition (1993) no. 932413.
https://doi.org/10.4271/932413

D. Taraza, Possibilities to Reconstruct Indicator Diagrams by Analysis of the Angular Motion of the Crankshaft, International Off-Highway & Powerplant Congress & Exposition (1993) no. 932414.
https://doi.org/10.4271/932414

D. Taraza, Accuracy Limits of IMEP Determination from Crankshaft Speed Mesurements, SAE 2002 World Congress & Exhibition (2002) no. 2002-01-0331.
https://doi.org/10.4271/2002-01-0331

F. J. J. Espadafor, J. A. B. Villanueva, D. P. Guerrero, M. T. Garcia, E. C. Trujillo, F. F. Vacas, Measurement and analysis of instantaneous torque and angular velocity variations of a low speed two stroke diesel engine, Mechanical Systems and Signal Processing 49(1-2) (2018) 135–153.
https://doi.org/10.1016/j.ymssp.2014.04.016

F. Mocanu, D. Taraza, Estimation of Main Combustion Parameters from the Measured Instantaneous Crankshaft Speed, SAE 2013 World Congress & Exhibition (2013) no. 2013-01-0326.
https://doi.org/10.4271/2013-01-0326

F. Taglialatela, N. Cesario, M. Lavorgna, S.S. Merola, B.M. Vaglieco, Use of Engine Crankshaft Speed for Determination of Cylinder Pressure Parameters, 9th International Conference on Engines and Vehicles (2009) no. 2009-24-0108.
https://doi.org/10.4271/2009-24-0108

F. Ponti, V. Ravaglioli, G. Serra, F. Stola, Instantaneous Engine Speed Measurement and Processing for MFB50 Evaluation, SAE International Journal of Engines 2(2) (2010) 235-244.
https://doi.org/10.4271/2009-01-2747

G. Rizzoni, Diagnosis of individual Cylinder Misfires by Signature Analysis of Crankshaft Speed Fluctuations, SAE International Congress and Exposition (1989) no. 890884.
https://doi.org/10.4271/890884

G. Rizzoni, F.T. Connolly, Estimate of IC Engine Torque from Measurement of Crankshaft Angular Position. International Off-Highway & Powerplant Congress & Exposition, International Off-Highway & Powerplant Congress & Exposition (1993) no. 932410.
https://doi.org/10.4271/932410

I. Gabitov, A. Negovora, E. Khasanov, R. Galiullin, M. Farhshatov, R. Khamaletdinov, V. Martynov, D. Gusev, N. Yunusbaev, M. Razyapov, Risk Reduction of Thermal Damages of Units in Machinery Heat Preparation for Load Acceptance, Journal of Engineering and Applied Sciences 14 (2019) 709–716.
https://doi.org/10.36478/jeasci.2019.709.716

I. Gabitov, S. Insafuddinov, D. Kharisov, F. Safin, А. Negovora, N. Yunusbaev, A. Akhmetov, T. Farhutdinov, A. Sharafeev, Diagnostics and Regulation of Fuel Equipment of Diesels on Stands with Injection to Medium with Counter-Pressure, Journal of Engineering and Applied Sciences 13 (2018) 8782-8788.

J.K. Ball, M.J. Bowe, R. Stone, P.D. Mcfadden, Torque Estimation and Misfire Detection using Block Angular Acceleration, SAE 2000 World Congress (2000) no. 2000-01-0560.
https://doi.org/10.4271/2000-01-0560

J. Williams, An Overview of Misfiring Cylinder Engine Diagnostic Techniques Based on Crankshaft Angular Velocity Measurements, International Congress & Exposition (1996), no. 960039.
https://doi.org/10.4271/960039

J. Williams, M.C. Witter, Individual Cylinder IMEP Estimation Using Crankshaft Angular Velocity Measurements, SAE 2001 World Congress (2001) no. 2001-01-0990.
https://doi.org/10.4271/2001-01-0990

L.U. Subasinghe, D. Mendis, T. Chandima, N. Jayaweera, S. De Silva, A Mathematical Model for Simulating Instantaneous Angular Speed Variation of a Crankshaft of an Automobile Engine, SAE Technical Paper (2015) no. 2015-01-0209

L. Zhang, W. Liu, F. Zhang, B. Wu, Diagnosis of the Working Unevenness of Each Cylinder by the Transient Crankshaft Speed, International Congress & Exposition (1996), no. 960463.
https://doi.org/10.4271/960463

M. Schmidt, F. Kimmich, H. Straky, R. Isermann, Combustion Supervision by Evaluating the Crankshaft Speed and Acceleration, SAE 2000 World Congress (2000) no. 2000-01-0558.
https://doi.org/10.4271/2000-01-0558

G.W. Malaczynski, R.V. der Poel, Phase Diagrams of Different Modes of Misfire Calculated from the Digital Fourier Transformation of Angular Crankshaft Velocity, SAE 2010 World Congress & Exhibition (2010) no. 2010-01-0167.
https://doi.org/10.4271/2010-01-0167

P.M. Azzoni, G. Minelli, D. Moro, R. Flora, G. Serra, Indicated and Load Torque Estimation using Crankshaft Angular Velocity Measurement, International Congress & Exposition (1999) no. 1999-01-0543.
https://doi.org/10.4271/1999-01-0543

P.R. Johnston, L.M. Shusto, Analysis of Diesel Engine Crankshaft Torsional Vibrations, SAE International Truck and Bus Meeting and Exposition (1987) no. 872540.
https://doi.org/10.4271/872540

R.M. Bashirov, S.Z. Insafuddinov, Patent № 2429373 rus. Stand for testing and adjustment of diesel fuel equipment. Filed. 12.12.2011. Pub. 24.02.2012.

R. Longwic, Dynamic Aspects of the Diesel Engine Work, SAE 2007 Commercial Vehicle Engineering Congress & Exhibition (2007) no. 2007-01-4210.
https://doi.org/10.4271/2007-01-4210

Y. Ge, Y. Huang, D. Hao, G. Li, H. Li, An indicated torque estimation method based on the Elman neural network for a turbocharged diesel engine, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 230(10) (2015) 1299–1313.
https://doi.org/10.1177/0954407015606271

S. Raikwar, L.J. Wani, S.A. Kumar, M.S. Rao, Hardware-in-the-Loop test automation of embedded systems for agricultural tractors, Measurement 133 (2019) 271-280.
https://doi.org/10.1016/j.measurement.2018.10.014

S. Drakunov, G. Rizzoni, Y.-Y. Wang, On-Line Estimation of Indicated Torque in IC Engines Using Nonlinear Observers. International Congress & Exposition, International Congress & Exposition (1995) no. 950840.
https://doi.org/10.4271/950840

S.F. Rezeka, N.A. Henein, A Diagnostic Technique for the identification of Misfiring Cylinder(s), SAE International Congress and Exposition (1987) no. 870546.
https://doi.org/10.4271/870546

S. Mudarisov, E. Khasanov, Z. Rakhimov, I. Gabitov, M. Davletshin, R. Aipov, Specifying Two-Phase Flow in Modeling Pneumatic Systems Performance of Farm Machines, Journal of Mechanical Engineering Research and Developments 40(4) (2017) 706-715.

Ż. Staszak, J. Selech, J. Marcinkiewicz, D. Romek, K. Włodarczyk, Ł. Gierz, D. Wojcieszak, The diagnostic information valuation method in servicing tractors, MATEC Web of Conferences 182(100) (2018) 01013.
https://doi.org/10.1051/matecconf/201818201013

D. Sun, D. Chen, S. Wang, X. Wang, A dynamic instability detection and prediction system for high clearance tractor, IFAC-PapersOnLine 49(16) (2016) 50-54.
https://doi.org/10.1016/j.ifacol.2016.10.010

Y.G. Zhang, T.X. Su, W.H. Li, H.P. Mao, N. Zhou, Dynamic Analysis of Diesel Engine Piston Based on Time Spectral Element Method, Automatic Control and Mechatronic Engineering II, Proceedings Paper 415 (2013) 565-568.
https://doi.org/10.4028/www.scientific.net/amm.415.565

N.I. Govorushchenko, I.V. Gorbik, Methods of system calculation-analytical and bench diagnostics of automobiles, Proceedings of International Scientific and Technical Conference. "Transport system engineering" (Kharkov State Technical University, 2018).

GOST R 53564-2009, National Standard of the Russian Federation. Condition monitoring and diagnostics of machines.

A.A. Zangiev, O.N. Didmanidze, G.E. Mitiagin, Improving the efficiency of maintenance departments of machinery depots (Agroconsult, 2001).

S.Z. Inshafuddin, F.R. Safin, E.M. Gaisin, A.F. Davletov, Diagnostics of diesel engines when injected into a medium with back pressure, Certificate of registration of the computer program RUS 2014611323, 2013.

I.F. Lachuga, Strategy of machine-technological modernization of agriculture in Russia for the period up to 2020 (Federal State Scientific Institution "Rosinformagrotekh", 2009).

I.A. Tsarev, A.A. Riabykh, Optimization of a multi-level storage facility of service enterprises, Tractors and agricultural machines 12 (2010) 37-39.

V.I. Chernoivanov, I.I. Gabitov, A.V. Negovora, Digital technologies and electronic means in the system of maintenance and repair of automotive and combine machinery, Proceedings of the International Scientific and Technical Conference "Intellectual machine technologies and machinery in agriculture" (Russian Academy of Sciences, Federal State Funded Research Institution Federal Engineering and Agricultural Centre, 2017).

Bosch Mobility Solutions.
https://www.bosch-mobility-solutions.com/en/products-and-services/mobility-services/predictive-diagnostics/


Refbacks

  • There are currently no refbacks.



Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2020 Praise Worthy Prize