Operating Properties of Tools Manufactured on 3d Printers Used in the Manufacture of Construction Materials
(*) Corresponding author
DOI: https://doi.org/10.15866/ireme.v14i6.18724
Abstract
Currently used 3D printing methods allow the production of tools from many different materials and for various applications. There are printers that use metals and plastics. The use of plastic as an inexpensive material for a production tool has been considered. Considering the production requirements, two 3D printing methods have been used: FDM and SL. In order to assess the suitability of these 3D printing methods for the modernization of production tools, it has been proposed to test the abrasion resistance of printed parts. In order to determine the durability, the printed samples have been subjected to an abrasion resistance test and its results have been presented in the article. The obtained results have showed that the materials used in both the considered 3D printing methods show similar abrasion resistance. New information has been obtained regarding the use of printed parts. Higher abrasion resistance of samples printed by the SL method has been found.
Copyright © 2020 Praise Worthy Prize - All rights reserved.
Keywords
Full Text:
PDFReferences
Oczoś K. E.: Rapid Prototyping - significance, characteristics of methods and possibilities. Mechanik, 1997, t. 70, nr 10, s. 441-452.
Tatarczak J., Krzysiak Z., Samociuk W., Kaliniewicz Z., Krzywonos L. Review of modern 3D printing technologies of metal objects. Mechanik nr 7/2017.
https://doi.org/10.17814/mechanik.2017.7.89
Siemiński P. Budzik G. Additive manufacturing. 3d printing. 3d printers. Warsaw University of Technology Publishing House 2015, edition I.
Pieniak D., Zubrzycki J., Wojciechowski Ł.: The use of rapid prototyping technology for the design of machine elements. Scientific Notebooks of the Faculty of Electronics and Computer Science of the Koszalin University of Technology. Koszalin University of Technology Publishing House, No. 10/2016, pp. 61-79.
Oczoś K. E.: Rapid Prototyping i Rapid Tooling - development of methods and techniques for rapid production of models, prototypes and small series products. Mechanik, 1998, t. 71, nr 4, s. 177-187.
Oczoś K. E.: Progress in rapid incremental shaping - Rapid Prototyping. Mechanik, 1999, t. 72, nr 4, s. 197-208.
Chlebus E. et al., Scientific works of the Institute of Machine Technology of the Wrocław University of Technology., 2000, nr 78, ser. Conference, z. 36, t. 1, s. 79-106.
Kotliński J.: Printing machine parts. Monograph. UTH Radom Publishing House 2018.
Kotliński J. Mechanical Properties of Commercial Rapid Prototyping Materials. Rapid Prototyping Journal. Emerald 2014. Vol:20, iss:6.
https://doi.org/10.1108/rpj-06-2012-0052
Ahn S. H., Baek C., Lee S. Ahn I. S.: Anisotropic Tensile Failure Model of Rapid Prototyping Parts - Fused Deposition Modeling (FDM). International Journal of Modern Physics B: Condensed Matter Physics; Statistical Physics; Applied Physics, 17/2003, pp. 1510-1516.
https://doi.org/10.1142/s0217979203019241
Kim G. D., Oh Y. T.: A Benchmark Study on Rapid Prototyping Processes and Machines: Quantitative Comparisons of Mechanical Properties, Accuracy, Roughness, Speed, and Material Cost. Proceedings of the Institution of Mechanical Engineers - Part B - Engineering Manufacture, 222/2008, pp. 201-215.
https://doi.org/10.1243/09544054jem724
Bellini A. Guceri S.: Mechanical Characterization of Parts Fabricated Using Fused Deposition Modeling. Rapid Prototyping Journal, 9/2003, p. 252-264.
https://doi.org/10.1108/13552540310489631
Lee C. S., Kim S. G., Kim H. J. Ahn S. H.: Measurement of Anisotropic Compressive Strength of Rapid Prototyping Parts. Journal of Materials Processing Technology, 187-188/2007, pp. 627-630.
https://doi.org/10.1016/j.jmatprotec.2006.11.095
Mikulska A., Kotliński J. Examination of printed machine parts. Monograph. UTH Radom Publishing House 2019.
Bolobov, V., Chupin, S., Bochkov, V., About Increasing Wear Resistance of Rock-Breaking Tool to Abrasion by Using Mechanical and Thermo-Mechanical Treatment, (2017) International Review of Mechanical Engineering (IREME), 11 (5), pp. 301-304.
https://doi.org/10.15866/ireme.v11i5.11581
Saputra, E., Anwar, I., J., J., Heide, E., A Wear Formulation of Total Hip Prosthesis for Salat Activity, (2019) International Review of Mechanical Engineering (IREME), 13 (1), pp. 29-37.
https://doi.org/10.15866/ireme.v13i1.16340
Kaisarlis, G., Stathakis, G., A Novel Tolerance Design Approach to Manufacturing and Quality Loss Cost Optimization in Mechanical Assemblies, (2017) International Review of Mechanical Engineering (IREME), 11 (9), pp. 651-660.
https://doi.org/10.15866/ireme.v11i9.11794
Drgona, P., Stefun, R., Stefke, L., Design and Practical Realization of CNC Device Designed for Automation of the Application of Viscous Materials, (2018) International Review of Mechanical Engineering (IREME), 12 (8), pp. 714-720.
https://doi.org/10.15866/ireme.v12i8.15153
Buitrago Salazar, G., Rosário, J., Ramos Sandoval, O., Estimation of Design Parameters for the Development of Exoskeletons Based on Dynamic and Structural Analysis, (2018) International Review of Mechanical Engineering (IREME), 12 (1), pp. 18-25.
https://doi.org/10.15866/ireme.v12i1.13618
Refbacks
- There are currently no refbacks.
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize