Email this article 
Open Access
Subscription or Fee Access
Modernization of Machining Centers Through Integration of Laser Systems Into Their Composition
(*) Corresponding author
DOI: https://doi.org/10.15866/ireme.v14i2.18242
Abstract
The purpose of this paper is to consider the problem of expanding the technological capabilities of numerically controlled metalworking machines, vertical machining centers (MC) in particular. One of the ways to solve this problem lies within the method of integrating fiber laser systems into the MC. The integration of lasers into CNC machines allows extending traditional cutting processes with technologies for microprocessing the surfaces of materials, which is possible due to the usage of energy flows concentrated on small areas as a new additional working tool. This article establishes an overview of the problem and focuses on formulating the main goals to conduct further research and find possible solutions.
Copyright © 2020 Praise Worthy Prize - All rights reserved.
Keywords
References
Kartavtsev I S Expansion of the functionality of a CNC lathe for calculating the parameters of the process of monitoring and adjusting equipment/Modern engineering, Science and education: materials of the 3rd International Scientific and Practical Conference Ed. M.M. Radkevich and A.N. Evgrafova. - SPb .: Polytechnic Publishing House. University, 2013. - P.905-914. – 1205p
Petkova A P, Ganzulenko O Yu Technological aspects of the marking of engineering products by a precision pulsed laser Modern engineering / Science and education: materials of the 4th International Scientific and Practical Conference. Ed. M.M. Radkevich and A.N. Evgrafova. - SPb .: Polytechnic Publishing House. University, 2014. - P.1177-1187. – 1308p.
Vasilev O S, Ruzankina J S Laser forming micro geometric structures on the surface of roller rolling mill / Journal of Physics: Conference Series. – 2016. – Vol. 735, – No. 1, – pp. 1–5. 30 August 2016 IOP Publishing.
https://doi.org/10.1088/1742-6596/735/1/012046
Olt J J, Maksarov V V, Efimov A E Impacts of gradient structure on the dynamic characteristics of machining process system / 29th DAAAM International Symposium On Intelligent Manufacturing And Automation, n 1, V 1,2018. pp. 190 - 196.
https://doi.org/10.2507/29th.daaam.proceedings.027
Andreev A O, Kosenko M S, Petrovskiy V N, Mironov V D 2016 Prototyping of Dental Structures Using Laser Milling / Journal of Physics: Conference Series 691(1) 012007
https://doi.org/10.1088/1742-6596/691/1/012007
Mohd Noor Firdaus Bin Haron, Fadlur Rahman Bin Mohd Romlay 2019 Parametric study of laser engraving process of AISI 304 Stainless Steel by utilizing fiber laser system / IOP Conference Series: Materials Science and Engineering 469(1) 012124
https://doi.org/10.1088/1757-899x/469/1/012124
Przestacki D, Jankowiak M 2014 Surface roughness analysis after laser assisted machining of hard to cut materials / Journal of Physics: Conference Series 483(1)012019
https://doi.org/10.1088/1742-6596/483/1/012019
ZengJie Ma, Yigang Wang, Yukun Li. Processing of Three-Dimensional Models for the Crystal Laser Engraving (2016) 2016 Nicograph International (NicoInt).
https://doi.org/10.1109/nicoint.2016.21
Vasilev O S, Veiko V P, Gorny S G, Ruzankina J S Laser device for microstructuring a metal surface using a fiber laser / Optical journal - 2015. - T. 82. – no. 12. - P. 70–77, ISSN 0030–4042
https://doi.org/10.1364/jot.82.000831
Vasilev O S, Gorny, S G Technology for creating surface microstructures on sheet materials using a fiber laser / Metalworking, Politekhnika Publishing House. - 2016. – no. 3 (93) 2016. - p. 20–25. - ISSN 1684–6702
Nasedkin Yu V, Khmelnitsky A K 2018 Laser cutting of carbon fiber-reinforced plastic thin sheets / Journal of Physics: Conference Series 1109(1) 012041
https://doi.org/10.1088/1742-6596/1109/1/012041
Larin M V, Pevzner Y B, Grinin O I, Lasota I T 2018 The use of single-mode fiber laser for welding of stainless steel thin thickness / Journal of Physics: Conference Series 1109(1) 012036
https://doi.org/10.1088/1742-6596/1109/1/012036
Efimov A E, Timofeev D Y, Maksarov V V, Modeling dynamic processes at stage of formation of parts previously subjected to high-energy laser effects / IOP Conf. Series: Materials Science and Engineering, № 1, V 327, 2018. pp. 22026 - 22026.
https://doi.org/10.1088/1757-899x/327/2/022026
Maksarov, V., Khalimonenko, A., Quality Assurance During Milling of Precision Elements of Machines Components with Ceramic Cutting Tools, (2018) International Review of Mechanical Engineering (IREME), 12 (5), pp. 437-441.
https://doi.org/10.15866/ireme.v12i5.14570
Maksarov V V, Khalimonenko A D, Forecasting performance of ceramic cutting tool / Key Engineering Materials, № 1, V 736, 2017. pp. 86 - 90.
https://doi.org/10.4028/www.scientific.net/kem.736.86
Maksarov V V, Timofeev D Y, Khalimonenko A D, Machining quality when lathing blanks with ceramic cutting tools / Agronomy Research, № 1, V 12, 2014. pp. 269 - 278.
Maksarov V V, Keksin A I. Forming conditions of complex-geometry profiles in corrosion-resistant materials / IOP Conference Series: Earth and Environmental Science, № 4, V 194, 2018. pp. 62016 – 62016
https://doi.org/10.1088/1755-1315/194/6/062016
Vukolov A., Egorova O. New perspectives of real and virtual mechanisms models in theory of mechanisms and machines (2015) 2015 IFToMM World Congress Proceedings, IFToMM 2015.
https://doi.org/10.6567/IFToMM.14TH.WC.OS7.006
Nacer-Eddine Demagh, Assia Guessoum, Rabah Zegari, Tijani Gharbi. Self-centring technique for fibre optic microlens mounting using a concave cone-etched fibre / Measurement Science and Technology 22(11) 115302
https://doi.org/10.1088/0957-0233/22/11/115302
Sokolov S A. Operational risk assessment in technological systems (2016) Russian Engineering Research, 36 (1), pp. 10-15.
https://doi.org/10.3103/S1068798X16010184
Refbacks
- There are currently no refbacks.
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize
