Closed Vector Contours in the Educational Course “Kinematics and Dynamics of Internal Combustion Engines”

Boris Kosenok; Valeriy Balyakin; Eduard Krylov

doi:10.15866/ireme.v12i9.15628

Closed Vector Contours in the Educational Course “Kinematics and Dynamics of Internal Combustion Engines”

Boris Kosenok⁽¹⁾, Valeriy Balyakin⁽²⁾, Eduard Krylov^(3*)

^(*) Corresponding author

Authors' affiliations

DOI: https://doi.org/10.15866/ireme.v12i9.15628

Abstract

A brief basis of the mathematical modeling method of closed vector contours is given in the paper. The necessity is shown for applying the method in the educational process to solve the problems of analysis and synthesis of mechanisms. The paper illustrates the application of the method for modeling closed vector contours in educational process; examples of such applications are given.
Copyright © 2018 Praise Worthy Prize - All rights reserved.

Keywords

Vector; Contour; Model; Modules; Internal Combustion Engines; Simulation; Sketch Design; Educational Process; Comparative Analysis

Full Text:

PDF

References

Lukanin V.N., Morozov K.A, Khachiyan A.S. et al., Internal Combustion Engines. Textbook for universities, Eds. Lukanin V.N. and Shatrov M.G. - 3rd ed. – M.: Higher School, 2007.

Kavtradaze R. Z. Theory of piston engines: Special chapters. Textbook for universities, 2nd ed. – M.: MSTU Publishing House, 2016. - 589 p.

Chaynov N. D., Ivashchenko N. A., Krasnokutsky A. N., Myagkov L. L., Design of internal combustion engines. Textbook for universities, Ed.: Chaynov N.D. - M .: Mashinostroenie, 2008. - 496 p.

Computer-information technologies in engine-building, Ed. Yamanin A.I. - M .: Mashinostroenie, 2005. - 480 p.

Basic ADAMS/Full Simulation (ADM 701) - М.: Moscow office of MSC. Software GmbH, 2005. – 754 p.

SolidWorks 2001: User documentation - М.: Moscow office of SolidWorks Corporation, 2001. – 286 p.

Universal Mechanism http://www.universalmechanism.com

MathWorks Simscape Multibody
https://www.mathworks.com/products/simmechanics.html

Zinoviev V. A. Vector method in the structural and kinematic study of mechanisms, Proceedings of high schools. Mechanical engineering. 1958. 6 - P. 3-9.

Semenov B. P., Kosenok B. B. Methods and Means of Dynamic Synthesis of the Mechanisms of Aviation Power Plants, Samara: Samara Scientific Center of the Russian Academy of Sciences, 2010. - 281 p.

Artobolevsky I.I. Theory of mechanisms and machines, – 4th ed., Moscow: Nauka, 2009. - 639 p.

Uicker, J., Pennock, G., and Shigley, J. Theory of machines and mechanisms. Fourth edition. New York – Oxford: Oxford university press, 2011. - 900p.
http://dx.doi.org/10.1115/1.1605769

Khurmi, R., S., Gupta J.K. Theory of machines. 14th edition: S Chand & Co Ltd. 2005. - 1071 p.

Savinov A. P., Yastrebov V. M., Korobova N. P. The theory of mechanisms and machines in aircraft industry. - Samara: SGAU, 2006. - 173 p.

Timofeev G.A. (ed.). Theory of mechanisms and machines. Course design. - 2 nd ed./ M.: Bauman MSTY, 2012 -169 p.

Evgrafov, A., Khisamov, A., Egorova, O. Experience of modernization of the curriculum TMM in St. Petersburg state polytechnical university, Mechanisms and Machine Science. 2014. 19, pp. 239-247.
http://dx.doi.org/10.1007/978-3-319-01836-2_26

Evgrafov A. N., Petrov G. N. Computer simulation of mechanisms, Lecture Notes in Mechanical Engineering. 2017. Pp. 45-56.
http://dx.doi.org/10.1007/978-3-319-53363-6_6

Evgrafov, A., Kozlikin, D., Leonid Assur (1878-1920) History of Mechanism and Machine Science. 2014. 26, Pp. 19-40.
http://dx.doi.org/10.1007/978-94-017-8947-9_2

DOI: 10.1007/978-94-017-8947-9_2

Evgrafov, A. N., Petrov, G. N., Calculation of the geometric and kinematic parameters of a spatial leverage mechanism with excessive coupling, Journal of Machinery Manufacture and Reliability. 2013. 42(3), Pp. 179-183.
http://dx.doi.org/10.3103/s1052618813030035

Babichev, D. Development of geometric descriptors for gears and gear tools, Mechanisms and Machine Science. 2018. 51, pp. 231-254.
http://dx.doi.org/10.1007/978-3-319-60399-5_11

Kosenok B. B. Analytical Decisions of the Spatial Vector Contours, Necessary for Kinematic Research of Lever Mechanisms, Mechatronics, Automation, Control. 2011. Vol. 6. p. 30-33.

Niola, V., Penta, F., Rossi, C., Savino, S., An underactuated mechanical hand: Theoretical studies and prototyping, International Journal of Mechanics and Control, Volume 16, Issue 1, pp. 11-19 (2015).

Penta F., Rossi C., Savino S. Analysis of suitable geometrical parameters for designing a tendon-driven under-actuated mechanical finger, . Front. Mech. Eng., 2016, 11(2): 184-194.
http://dx.doi.org/10.1007/s11465-016-0385-y

Karelina M., Krylov E., Rossi C., Savino S., Timpone F. A multibody model of Federica Hand, Engineering Letters. 2016. Vol. 24(4). p. 406-417.

Evgrafov, A., Kornishov, А., Geometric, kinematic and dynamic analysis of four degrees of freedom manipulating robot, using methods of nonlinear programming, Mechanisms and Machine Science. 2014. 17, Pp. 333-340.
http://dx.doi.org/10.1007/978-94-007-7485-8_41

Mazda CX-5 Diesel and Power Unit [Study guide], Mazda Motor Europe GmbH Training Services, 2012 –176 p.

Kosenok B. B., Balyakin V. B. Study of the Dynamic Characteristics of a Two-Cylinder Internal Combustion Engine Using Vector Models, Procedia Engineering, vol. 106, pp. 183-191, 2015.
http://dx.doi.org/10.1016/j.proeng.2015.06.023

Kosenok B. B. Crank–Rod Mechanism for an Internal Combustion Engine, Russian Engineering Research, Vol. 37, No. 1, pp. 19–22, 2017, Allerton Press.
http://dx.doi.org/10.3103/s1068798x17010105

Kosenok B. B., Balyakin V. B., Giltsov I. N., The Use of Vector Models to Study the Dynamic Characteristics of an Advanced Two-Shaft Internal Combustion Engine, Procedia Engineering, vol. 176, no. 1, рр 37–42, 2017.

http://dx.doi.org/10.1016/j.proeng.2017.02.270

Refbacks

There are currently no refbacks.

Username
Password
Remember me