Open Access Open Access  Restricted Access Subscription or Fee Access

Atmospheric-Pressure Annealing Effect on the Impact Fracture Toughness of Injection-Molded Zeolite-HDPE Composite


(*) Corresponding author


Authors' affiliations


DOI: https://doi.org/10.15866/ireme.v12i6.15034

Abstract


This study focuses on an investigation of the fracture behavior of zeolite-HDPE composites after annealing treatment under atmospheric pressure. Annealing processes were carried out at various holding time (12, 24, 36, and 48 hours). The fracture toughness of composites was investigated based on the essential work of fracture (EWF) concept, and the surface morphology of composite was evaluated using scanning electron microscope (SEM). The results show that the essential work of the fracture increases with the increase of the holding time of annealing process up to 36 hours. However, all tested materials exhibit negative values in term of non-essential fracture work. The outer plastic deformation zone cannot be observed around the ligaments of the fracture propagation pathway on the surface of the broken sample. Thus, all the fracture energy was used to create a new fracture surface in the inner fracture process zone.
Copyright © 2018 Praise Worthy Prize - All rights reserved.

Keywords


Annealing; Zeolite; HDPE; Impact Fracture

Full Text:

PDF


References


J. K. Liu, O. N. Gottfried, C. D. Cole, W. R. Dougherty, W. T. Couldwell, Porous polyethylene implant for cranioplasty and skull base reconstruction, Neurosurgical Focus, Vol. 16. n. 3, ECP1, 2004.
http://dx.doi.org/10.3171/foc.2004.16.3.14

N. J. Mokal, M. F. Desai, Calvarial reconstruction using high-density porous polyethylene cranial hemispheres, Indian Journal Plastic Surgery, Vol. 44. n. 3, pp. 422-431, 2011.
http://dx.doi.org/10.4103/0970-0358.90812

Purnomo, R. Soenoko, A. Suprapto, Y. S. Irawan, Impact Fracture Toughness Evaluation by Essential Work of Fracture Method in High-Density Polyethylene Filled with Zeolite, FME Transactions, Vol. 44, n. 2, pp. 180-186, 2016.
http://dx.doi.org/10.5937/fmet1602180p

Purnomo, P., Subri, M., Post-Yield Fracture Behavior of Zeolite-Reinforced High Density Polyethylene Annealed Composite, (2017) International Review of Mechanical Engineering (IREME), 11 (1), pp. 87-93.
http://dx.doi.org/10.15866/ireme.v11i1.10542

Purnomo, R. Soenoko, Y. S. Irawan, A. Suprapto, Deformation Under Quasi Static Loading In High Density Polyethylene Filled With Natural Zeolite, Journal of Engineering Science and Technology, Vol. 12, n. 5, pp. 1191-2203, 2017.

Purnomo, M. Subri, P. Setyarini, Fracture Development and Deformation Behavior Of Zeolite-Filled High-Density Polyethylene Annealed Composites In The Plane Stress Fracture, FME Transactions, Vol. 46, n. 2, pp. 165-170, 2018.
http://dx.doi.org/10.5937/fmet1802157z

P. Kar, B. B. Khatua, Effect of Coefficient of Thermal Expansion on Positive Temperature Coefficient of Resistivity Behavior of HDPE-Cu Composites, Journal of Applied Polymer Science, Vol. 118, n. 2, pp. 950-959, 2010.
http://dx.doi.org/10.1002/app.32455

J.–W. Zha, D.–H. Wu, Y. Yang, Y.–H. Wu, R. K. Y. Li, Z.-M. Dang, Enhanced Positive Temperature Coefficient Behavior of The High-Density Polyethylene Composites with Multi-Dimensional Carbon Fillers and Their Use for Temperature-Sensing Resistors, RSC Advances, Vol. 7, n. 19, pp. 11338-11344, 2017 .
http://dx.doi.org/10.1039/c6ra27367j

P. Lightfoot, D. A. Woodcock, M. J. Maple, L. A.Villaescusa, P. A. Wright, The Widespread Occurrence of Negative Thermal Expansion in Zeolites, Journal of Materials Chemistry, Vol. 11, n. 1, pp. 212–216, 2001.
http://dx.doi.org/10.1039/b002950p

B. A. Marinkovic, P. M. Jardim, A. Saavedra, L. Y. Lau, C. Baehtz, R. R. de Avillez, F. Rizzo, Negative Thermal Expansion in Hydrated HZSM-5 Orthorhombic Zeolite, Microporous and Mesoporous Materials, Vo. 71, n. 1-3, pp. 117-124, 2004.
http://dx.doi.org/10.1016/j.micromeso.2004.03.023

M. M. Martinez-Inesta, R. F. Lobo. Investigation of the Negative Thermal Expansion Mechanism of Zeolite Chabazite Using the Pair Distribution Function Method, Journal of Physical Chemistry B, Vol. 109, n. 19, pp. 9389-9396, 2005.
http://dx.doi.org/10.1021/jp044165w

A. B. Martinez, J. Gamez-Perez, M. Sanchez-Soto, J. I. Velasco, O. O. Santana, M. L. Maspoch, The Essential Work of Fracture (EWF) Method – Analyzing the Post-Yielding Fracture Mechanics of Polymers, Engineering Failure Analysis, Vol. 16, n. 8, pp. 2604-2617, 2009.
http://dx.doi.org/10.1016/j.engfailanal.2009.04.027

T. Kuno, Y. Yamagishi, T. Kawamura, K. Nitta, Deformation Mechanism Under Essential Work of Fracture Process in Polycyclo-Olefin Materials, Express Polymer Letters, Vol. 2, n. 6, pp. 404-412, 2008.
http://dx.doi.org/10.3144/expresspolymlett.2008.49

H. J. Kwon, P.-Y. B. Jar, Application of Essential Work of Fracture Concept to Toughness Characterization of High-Density Polyethylene, Polymer Engineering and Science, Vol. 47, n. 9, pp. 1327-1337, 2007.
http://dx.doi.org/10.1002/pen.20814

Purnomo, R. Soenoko, Y. S. Irawan, A. Suprapto, Fracture Behavior of Zeolite-Filled High Density Polyethylene Based on Energy Partitioning Work of Fracture, International Journal of Applied Engineering Research, Vol. 9, n. 24, pp. 28737-28747, 2014.

Purnomo, R. Soenoko, Y. S. Irawan, A. Suprapto, Morphological and Mechanical Properties of Natural Zeolite-High Density Polyethylene Composite, International Journal of Applied Engineering Research, Vol. 10, n. 11, pp. 28001-28012, 2015.

S. C. Tjong, S. A. Xu, Y. W. Mai, Impact Fracture Toughness of Short Glass Fiber-Reinforced Polyamide 6,6 Hybrif Composites Containing Elastomer Particles Using Essential Work of Fracture Concept, Materials Science and Engineering: A, Vol. 347, n. 1-2, pp. 338-345, 2003.
http://dx.doi.org/10.1016/s0921-5093(02)00609-3

F. Awaja, S. Zhang, M. Tripathi, A. Nikiforov, N. Pugno, Cracks, Microcracks and Fracture in Polymer Structures: Formation, Detection, Autonomic Repair, Progress in Materials Science, Vol. 83, pp. 536-573, 2016 .
http://dx.doi.org/10.1016/j.pmatsci.2016.07.007

T. Vu-Khanh, Impact Fracture Characterization of Polymer with Ductile Behavior, Theoretical and Applied Fracture Mechanics, Vol. 21, pp. 83–90, 1994.
http://dx.doi.org/10.1016/0167-8442(94)00027-1

T. Vu-Khanh, The Impact Fracture of Polymers: Unanswered Question, Trends Polymer Science, Vol. 5, pp. 356–360, 1997.
http://dx.doi.org/10.1016/0032-3861(88)90170-x

J. Huang, D. R. Paul. Comparison of Fracture Behavior of Nylon 6 Versus an Amorphous Polyamide Toughened with Maleated Poly(ethylene1-octene) Elastomers, Polymer, Vol.47, n. 10, pp. 3505–3519, 2006.
http://dx.doi.org/10.1016/j.polymer.2006.03.038

D. M. Laura, H. Keskkula, J. W. Barlow, D. R. Paul, Effect of Rubber Particle Size and Rubber Type on the Mechanical Properties of Glass Fber Reinforced, Rubber-Toughened Nylon 6. Polymer, Vol. 44, n. 11, pp. 3347–3361, 2003.
http://dx.doi.org/10.1016/s0032-3861(03)00221-0

O. Okada, H. Keskkula, D. R. Paul. Fracture Toughness of Nylon-6 Blends with Maleated Rubbers, Journal of Polymer Science Part B: Polymer Physics, Vol. 42, n. 9, pp. 1739–1758, 2004.
http://dx.doi.org/10.1002/polb.20052

Y. J. Yoo, R. K. Shah, D. R. Paul, Fracture Behavior of Nanocomposites Based on Poly(ethylene-co-methacrylic acid) ionomers, Polymer, Vol. 48, n. 16, pp. 4867 – 4873, 2007.
http://dx.doi.org/10.1016/j.polymer.2007.06.007

L. Wang, Q.–P. Zhang, J.–H. Wang, B. Yang, M.–B. Yang, J.–M. Feng, Effects of Annealing on the Hierarchical Crystalline Structures and Mechanical Properties of Injection-Molded Bars of High-Density Polyethylene, Polymer International, Vol. 63, n. 2, pp. 296-306, 2014.
http://dx.doi.org/10.1002/pi.4505

C. L. Shan, J. B. P. Soares, A. Penlidis. HDPE/LLDPE Reactor Blends with Bimodal Microstructures–Part 1:Mechanical Properties, Polymer, Vol. 43, n. 26, pp. 7345 – 7365, 2002.
http://dx.doi.org/10.1016/s0032-3861(02)00703-6

M. Basiura, R. I. Gearba, D. A. Ivanov, J. Janicki, H. Reynaers, G. Groeninckx, W. Bras, B. Goderis, Rapid Cooled Polyethylene: On the Thermal Stability of the Semicrystalline Morphology, Macromolecules, Vol. 39, n. 24, pp. 8399 – 8411, 2006.
http://dx.doi.org/10.1021/ma060588f

W. K. Wong, B. F. Yousif, K. O. Low, Y. Ng, S. L. Tan, Effects of Filler on the Fracture Behaviour of Particulate Polyester Composites, Journal of Strain Analysis for Engineering Design, Vol. 45, n. 1, pp. 67-78.
http://dx.doi.org/10.1243/03093247jsa553

R. Kitey, H. V. Tippur, Role of Particles Size and Filler-Matrix Adhesion on Dynamic Fracture of Glass-Filled Epoxy. II. Linkage between Macro and Micro-Measurement, Acta Materialia, Vol. 53, n. 4, pp. 1167-1178, 2005.
http://dx.doi.org/10.1016/j.actamat.2004.11.011


Refbacks

  • There are currently no refbacks.


Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize