Research of High-Level Control System for Centrifuge Engine

Alexander N. Evgrafov; Vladimir I. Karazin; Andrei V. Khisamov

doi:10.15866/ireme.v12i5.14529

Research of High-Level Control System for Centrifuge Engine

Alexander N. Evgrafov^(1*), Vladimir I. Karazin⁽²⁾, Andrei V. Khisamov⁽³⁾

^(*) Corresponding author

Authors' affiliations

DOI: https://doi.org/10.15866/ireme.v12i5.14529

Abstract

Complex centrifuge stands or other complex machines with an electrical motor require a complex control system. As a rule, control systems implemented as physical devices or modules are not replaceable or scalable while programmable control systems can be easily replaced or updated. This paper discusses the black-box electrical motor scheme of interaction based on computer-aided control system.
Copyright © 2018 Praise Worthy Prize - All rights reserved.

Keywords

Control System; Electrical Motor; Movidrivе

Full Text:

PDF

References

A. N. Evgrafov, V. I. Karazin, G.A. Smirnov, Rotary stands for motion variables simulation (in Russian), Scientific and technical reports of SPbGTU, n. 3(17), pp. 89–94, 1999.

A. N. Evgrafov, V. I. Karazin, I. O. Khlebosolov, Playing motion parameters on rotary stands (in Russian), Theory of mechanisms and machines, Vol. 1, n. 1, pp. 92-96, 2003.

J. Lee, C.-W. Park, K. Park, J.-Y. Ryu, Development of a New Automatic Control System for the Harmonics Analysis of Distribution Transformers, International Journal of Control, Automation, and Systems, Vol. 14, n. 3, pp. 796-803, 2016.
http://dx.doi.org/10.1007/s12555-014-0426-4

G.-B. Cho, P.-H. Kim, A precise control of AC servo motor using neural network PID controller, Current science, Vol. 89, n. 1, pp. 23-29, 2005.

F. Flacco, S. Haddadin, T. Kroeger, D. Lee, Planning, Control, and Sensing for Safe Human-Robot Interaction, 2015 IEEE International Conference on Robotics and Automation.
http://dx.doi.org/10.1109/icra.2011.5980549

H. Shibasaki, R. Yusof, Y. Ishida, A Design Method of a Model-following Control System, International Journal of Control, Automation, and Systems, Vol. 13, n. 4, pp. 843-852, 2015.
http://dx.doi.org/10.1007/s12555-014-0131-3

J. Friedrich, S. Scheifele, A. Verl, A. Lechler, Flexible and Modular Control and Manufacturing System, 9th CIRP Conference on Intelligent Computation in Manufacturing Engineering - CIRP ICME '14.
http://dx.doi.org/10.1016/j.procir.2015.06.022

Evgrafov, A., Karazin, V., Kozlikin, D., Khlebosolov, I., Centrifuges for Variable Accelerations Generation, (2017) International Review of Mechanical Engineering (IREME), 11 (5), pp. 280-285.
http://dx.doi.org/10.15866/ireme.v11i5.11577

V.I. Ksenofontov, V.N. Nikolaev, S.Yu. Chernokrylov, Multifunctional dynamic stand. Testing and control stands (LGTU, 1992).

MOVIDRIVE Operating Instructions Manual 16837614/EN (Edition 11/2001,SEW-EURODRIVE GmbH, 2001).

MOVIDRIVE Serial Communications Manual 1053 1610/EN (Edition 01/2010, SEW-EURODRIVE GmbH, 2010).

T. Goodman, Centrifuge rotor selection and maintenance, American laboratory, Vol. 39, n. 12, pp. 12-14, 2007.

T. Goodman, Selecting Centrifuge Consumables, G.I.T. Laboratory Journal Europe, Vol. 7-8, pp. 35-37, 2008.

A. V. Khisamov, Study of centrifuge rotor extension, Theory of mechanisms and machines, Vol. 11, n. 1, pp. 90-98, 2013.

J. C. Gamazo-Real, E. Vázquez-Sánchez, J. Gómez-Gil, Position and Speed Control of Brushless DC Motors Using Sensorless Techniques and Application Trends, Sensors (Basel), Vol. 10 n.7, pp. 6901–6947, 2010.
http://dx.doi.org/10.3390/s100706901

K. L. Goh, Performance of an automated centrifuge control system, Proc. of the international Conf. Centrifuge 94, Singapore, 1994.
http://dx.doi.org/10.1016/s0015-1882(16)30029-5

J. F. Lampón, P. Cabanelas, V. Frigant, The new automobile modular platforms: from the product architecture to the manufacturing network approach, Working Paper, 2017.
http://dx.doi.org/10.13140/RG.2.2.29942.40006

W. Hou, Ch. Shan, Y. Yu, P. Hu, H. Zhang, Modular platform optimization in conceptual vehicle body design via modified graph-based decomposition algorithm and cost-based priority method, Structural and Multidisciplinary Optimization, Vol. 55, n. 6, pp. 2087-2097, 2017.
http://dx.doi.org/10.1007/s00158-016-1629-5

J. Padayachee, G. Bright, Modular machine tools: Design and barriers to industrial implementation, Journal of Manufacturing Systems, Vol. 31, n. 2, pp. 92-102, 2012.
http://dx.doi.org/10.1016/j.jmsy.2011.10.003

Refbacks

There are currently no refbacks.

Username
Password
Remember me