Test Methods of Increasing Precision Verification of Continuous Conveyor-Type Weighers

Igor Alexander Galin

doi:10.15866/ireme.v11i11.12237

Test Methods of Increasing Precision Verification of Continuous Conveyor-Type Weighers

Igor Alexander Galin^(1*)

^(*) Corresponding author

Authors' affiliations

DOI: https://doi.org/10.15866/ireme.v11i11.12237

Abstract

This paper presents a classification of belt weighers verification methods and their comparative analysis. It is justified the use of test methods with reference weight to increase the precision of belt weigher verification without stopping of the continuous production process. Some algorithms of the indirect test verification method and the results of the theoretical and experimental study of this method are presented, together with the analysis of the errors of the indirect test verification method. Some recommendations for minimizing the verification errors for dual-channel and multi-channel belt weighers are given.
Copyright © 2017 Praise Worthy Prize - All rights reserved.

Keywords

Belt Weigher; Test Method Verification; Reference Weight; Hoist; Dual-Channel and Multi-Channel Belt Weighers; Verification Error

Full Text:

PDF

References

OIML R 50-1:1997, Continuous Totalizing Automatic Weighing Instruments (beltweighers). Part 1: Metrological and Technical Requirements. Tests.

Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring Device. Section 2.22. Automatic Bulk Weighing Systems. NIST (National Institute of Standarts and Technology) Handbook 44-2017.
http://dx.doi.org/10.6028/nist.hb.44-2016

GOST 8.005–2002, GSI. Continuous Conveyor-Type Scales. Calibration Technique.

Guide to Dynamic Weighing for Industry, The institute of measurement and control, London, 2010.

V. K. Donis, A. E. Rachkovskii, and N. Yu. Gudovskaya, Methods of Verifying Continuous Automatic Belt Weighers: State and Prospects, Measurement Techniques, 46(9), 851-856.

V. K. Donis, I. A Galin, Dynamic Simulator of Conveyor Flow, Mining Journal [in Russian], No.8, 1993, 18-21.

Yu. V. Gugovskii, V. K. Donis, and V. M. Sin, Indirect Method of Checking Conveyor Scales, Measurement Techniques, 35(5), 553-556.

E. M. Bromberg and K. L. Kulikovskii, Test Methods of Increasing Measurement Precision, [in Russian] (Energiya, Moscow 1971).

Calibration Method of Continuous Automatic Belt Weighers. Patent No. 52-25107 Japan.

G. F. Alekseev et. al., Belt Weigher, Inventor' Sertificate 885817 SSSR, Byull. Izobret., No.44 (1981).

V. K. Donis et. al., Calibration and Verification Method of Belt Weighers, Patent 2289798 RF.

V. K. Donis, Increasing the Accuracy and Efficiency of a Conveyor Balance, Measurement Techniques, 39(9), 928-933.
http://dx.doi.org/10.1007/bf02369842

V. S. Ivanov, A.I. Chernyaev, Sell-Correcting Belt Scales with Digital Control, Measurement Techniques, 33(4), 327-329.
http://dx.doi.org/10.1007/bf00867818

I. A. Galin, Classification and Comparative Analysis of Belt Weigher Hoists, Mechanical Engineering Research, 6(1).
http://dx.doi.org/10.5539/mer.v6n1p1

I. A. Galin and V. K. Donis, Calibration of Continuous Conveyor-type Weighers Using Reference Weights without Stoppage of Production Process, Measurement Techniques, 57 (8), 884–890.
http://dx.doi.org/10.1007/s11018-014-0554-5

V. K. Donis, Yu. K. Broshel and Yu. A. Turtanov, Selecting of Installation Location for Automatic Belt Weighers, [in Russian] Mining Machines and Automatics, No. 8 (1968), 39-42, Moscow.

Ye. M. Vysochin, “Influence of Elastic Properties of a Belt on the Operation of Conveyor-Type Weighers,” in: Vopr. Rudnich. Transp. (1958), Iss. 2, pp. 142–152 [in Russian].

I.A. Galin, Verification of Continuous Multichannel Belt-Conveyor Weighers, Measurement Techniques, 59(1), 34-40.
http://dx.doi.org/10.1007/s11018-016-0912-6

V. K. Donis, A. V. Bocharov, and I. A. Galin, Application of similitude theory to the investigation of processes of measurement and proportioning of mass, [in Russian] Metrologiya, No.9, 30-37 (1997) [in Russian].

A. V. Bocharov, M. N. Budnev, I. A. Galin, V. K. Donis and A. E. Rachkovskii, Test and Experience from the Use of an Indirect Method of Calibration Proper and Calibration Measurement of Conveyor-type Weighers,” Glav. Metrolog, No. 6, 40–42 (2007)l [in Russian].

Refbacks

There are currently no refbacks.

Username
Password
Remember me