Open Access Open Access  Restricted Access Subscription or Fee Access

Modeling and Numerical Simulation of the Motion of a Solid Particle in a Fluid Flow


(*) Corresponding author


Authors' affiliations


DOI: https://doi.org/10.15866/ireme.v11i9.11385

Abstract


The transport of solid particles within fluid flows occurs in many fields related to industrial processes and environmental applications. In fact, it plays a role in nuclear safety, air pollution and wind transport of mineral dust or surface contamination in electronics (alteration of microelectronic devices). The general context of this work deals with the modeling of two-phase flows (solid / liquid).The work carried out concerns the understanding and the modeling of the mechanisms of transport of solid particles in a fluid. The approach of the phenomenon is made using analytical and numerical ways by using the method of Runge Kutta. The goal is to establish a numerical code, using the FORTRAN language, which makes it possible the determination of the trajectories of solid particles in a fluid flow. The objective is to investigate the effect of fluid velocity and particle diameter.
Copyright © 2017 Praise Worthy Prize - All rights reserved.

Keywords


Solid Transport; Two-Phase Flow; Runge-Kutta Method

Full Text:

PDF


References


K. Gueraoui, M. Taibi, M. Tricha, Y. Belkassmi, A. Elbouzidi, B. Bahrar, A. Mzerd, G. Zeggwagh. “Analytical and numerical modeling of the dispersion of particles in blood flow through elastic pipe” J. Mater. Environ. Sci. 7 (9) (2016) 3437-3446
http://dx.doi.org/10.12988/ams.2015.411986

S. Zouaoui, H.Djebouri, A. Menguelti, K. Mohammedi and A.Ouaked “Analytical Approach Modelling of the Motion of a Solid Particle in a Fluid Flow inside a Pipe” ACMA2014
http://dx.doi.org/10.1007/s11786-017-0315-3

M. Tricha. « modélisations analytique et numérique de la dispersion de particules dans un écoulement sanguin en conduite élastique ». Thèse de doctorat université mohamed 5, 2016

S. Zouaoui. « modélisation et simulation des écoulements multiphasiques basées sur une approche multi-échelle. -application au transport solide- ». Thèse de doctorat. Université Mouloud Maamri de Tizi Ouzou. 2016

J. El hijri. « contribution expérimentale et numérique à l’étude de la remise en suspension des particules par l’activité humaine ». Thèse de doctorat cotutelle. Université Abdelmalek Essaâdi, Université de La Rochelle. 2008

M. Coquerelle, G.-H. Cottet. “A vortex level set method for the two-way coupling of an incompressible fluid with colliding rigid bodies” Journal of Computational Physics 227 (2008).
http://dx.doi.org/10.1016/j.jcp.2008.03.041

M.D. de Tullio_, G. Pascazio_ and M. Napolitano. “Arbitrarily shaped particles in shear flow” Computational Fluid Dynamics (ICCFD7), Big Island, Hawaii, July 9-13, 2012
http://dx.doi.org/10.1007/s00397-006-0110-6

Belcadi M., El Rhaleb H., Gueraoui K., Driouich M., Hybridization microwave and laser for melting of ceramic surface, Adv. Studies Theo. Phys., 8 (2014).
http://dx.doi.org/10.12988/astp.2014.39109

Gueraoui ,K., Hammoumi , A., Zeggwagh, G.(1996), Ecoulements pulsés de fluides inélastiques en conduites déformables poreuses et anisotropes, C.R. Acad. Sci., Paris, 323, série B, pp. 825-832.
http://dx.doi.org/10.1051/lhb/1998075

Abdelhak Ghouli, Kamal Gueraoui, Myrieme Walid, Ilham Aberdane, Abdellah El Hammoumi, Mohammed Kerroum, Gamal Zeggwagh, Yehia Mohammed Haddad, Numerical Study of Pollutant Propagation Process in Homogeneous Porous Unsaturated Media, (2009) International Review of Mechanical Engineering (IREME), 3 (3), pp. 358-362.

M. Driouich, K. Gueraoui, Y. M. Haddad, A. El Hammoumi, M. Kerroum, O. Fassi Fehri, Mathematical modeling of non permanent flows of molten polymers, (2010) International Review of Mechanical Engineering (IREME), 4 (6), pp. 689-694.

Men-la-yakhaf, S. , Gueraoui, K., Driouich, M.,(2014), Numerical and Mathematical Modeling of Reactive Mass Transfer and Heat Storage Installations of Argan Waste, Advanced Studies in Theoretical Physics, Vol. 8, no. 10, 485-498.
http://dx.doi.org/10.12988/astp.2014.4331

Belcadi, M., El Rhaleb, H., Gueraoui, K., Driouich, M., Combined Processes: Laser Assisted Microwave Sintering of Alumina, (2013) International Review of Mechanical Engineering (IREME), 7 (7), pp. 1451-1458.

Men-la-yakhaf, S., Gueraoui, K., Maaouni, A., Driouich, M., Numerical and Mathematical Modeling of Reactive Mass Transfer and Heat Storage Installations of Argan Waste, (2014) International Review of Mechanical Engineering (IREME), 8 (1), pp. 236-240.
http://dx.doi.org/10.15866/ireme.v8i1.1265

A. Saad, A. Echchelh, F. Lahlou, K. Gueraoui, P.Cardot, The Kinematic Elution of 99mtc Radio Labelled Red Blood Cells in a Channel of Gravitational Field Flow Fractionation (Grfff), (2008) International Review of Mechanical Engineering (IREME), 2 (2), pp. 233-240.

Belcadi, M., Gueraoui, K., El Rhaleb, H., Driouich, M., Dhiri, A., Numerical Simulation of Microwave Assisted Laser Melting Alumina, (2015) International Review of Mechanical Engineering (IREME), 9 (5), pp. 429-437.
http://dx.doi.org/10.15866/ireme.v9i5.2042

Chammami R., Taibi M., Hami M., Gueraoui K., Zeggwagh G.,Influence of the kind of duct on two-fluid pulsatile flows model. Application to the microcirculation, Houille Blanche (2001).
http://dx.doi.org/10.1051/lhb/2001030

Taibi M., Chammami R., Kerroum M., Gueraoui K., El Hammoumi A., Zeggwagh G., Pulsating flow of two phases in deformable or rigide tubes, ITBM-RBM (2002).
http://dx.doi.org/10.1016/s1297-9562(02)80012-2

EL-Tourroug, H., Gueraoui, K., Hassanain, N., Driouich, M., Men-La-Yakhaf, S., Numerical Modeling of the Phenomenon of Crystallization of Incompressible Fluid Flows into Rigid Pipes. Application to Polymer Melts, (2015) International Review on Modelling and Simulations (IREMOS), 8 (1), pp. 99-103.
http://dx.doi.org/10.15866/iremos.v8i1.5141

Ilham Aberdane, Kamal Gueraoui, Mohammed Taibi, Abdelhak Ghouli, Abdellah El Hammoumi, Mohammed Cherraj, Mohammed Kerroum, Myrieme Walid, Omar Fassi Fihri, Yehia Mohammed Haddad, Two-Dimensional Theoretical and Numerical Approach of Pollutant Transport in the Lowest Layers of the Atmosphere, (2009) International Review of Mechanical Engineering (IREME), 3 (4), pp. 494-502.

M. Sammouda, K. Gueraoui, M. Driouich, A. El Hammoumi, A. Iben Brahim, The Variable Porosity Effect on the Natural Convection in a non-Darcy Porous Media, (2011) International Review on Modelling and Simulations (IREMOS), 4 (5), pp. 2701-2707.

K. Gueraoui, M. Taibi, A. Ghouli, A. Mrabti, G. Zeggwagh, Y. M. Haddad, Pulsating Flows of Inelastic Fluids in Anisotropic Porous Viscoelastic Tubes, (2008) International Review of Mechanical Engineering (IREME), 2 (3), pp. 506-512.

A Mrabti, K Gueraoui, A Hihi, O Terhmina, Effects of microstructure on natural convection flow of micropolar fluids in a vertical cylinder heated from below. International journal of engineering science 38 (7), 823-831, (2000)
http://dx.doi.org/10.1016/s0020-7225(99)00037-3

K Gueraoui, A Hammoumi, M Kerroum, G Zeggwagh, Modélisation théorique d'écoulements de fluides non newtoniens en conduites élastiques, poreuses et isotropes. Journal of hydraulic research 35 (3), 301-322, (1997)
http://dx.doi.org/10.1016/s1251-8069(98)80021-5

Sammouda, M., Gueraoui, K., Driouich, M., El-Hammoumi, A., Iben Brahim, A., Non-Darcy natural convection heat transfer along a vertical cylinder filled by a porous media with variable porosity, (2012) International Review of Mechanical Engineering (IREME), 6 (4), pp. 698-704.

Sammouda, M., Gueraoui, K., Driouich, M., Ghouli, A., Dhiri, A., Double Diffusive Natural Convection in Non-Darcy Porous Media with Non-Uniform Porosity, (2013) International Review of Mechanical Engineering (IREME), 7 (6), pp. 1021-1030.

El Khaoudi, F., Gueraoui, K., Driouich, M., Sammouda, M., Numerical and Theoretical Modeling of Natural Convection of Nanofluids in a Vertical Rectangular Cavity, (2014) International Review on Modelling and Simulations (IREMOS), 7 (2), pp. 350-355.
http://dx.doi.org/10.15866/iremos.v7i2.585

Tricha, M., Gueraoui, K., Zeggwagh, G., Mzerd, A., New Numerical and Theoretical Approaches to Study the Blood Flows at Microcirculation Level, (2014) International Review of Mechanical Engineering (IREME), 8 (6), pp. 1043-1046.
http://dx.doi.org/10.15866/ireme.v8i6.2725


Refbacks

  • There are currently no refbacks.



Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize