Fatigue Performance of Hybrid Fibre Metal Laminate Structure
(*) Corresponding author
DOI: https://doi.org/10.15866/ireme.v11i1.10532
Abstract
Increasing the knowledge about the fatigue performance of thermoplastic-based fibre metal laminate is crucial for further extending their applications. In this study, the density and tension-tension fatigue performances of laminate structures with different hybrid layups are investigated. The fibre metal laminate structure is formed by bonding the composite laminate to annealed aluminium 5052 by using polypropylene adhesive through the hot press moulding compression method. The fatigue test was conducted at force controlled constant amplitude loading in accordance with ASTM E466. The results show that hybrid composite laminates layups of kenaf/glass/kenaf reinforced metal laminate improve the tensile and fatigue strength by 9%, compared to composite laminates layups of kenaf/kenaf/kenaf fibre reinforced metal laminate. Meanwhile, the hybrid composite laminates layups of glass/kenaf/glass reinforced metal laminate show an increase in tensile strength and fatigue strength by 30% and 4% respectively. In terms of fatigue sensitivity, a hybrid laminate system with kenaf/glass/kenaf composite construction had better performance than other layups.
Copyright © 2017 Praise Worthy Prize - All rights reserved.
Keywords
Full Text:
PDFReferences
E. C. Botelho, R. A. Silva, L. C. Pardini, M. C. Rezende, A Review on the Development and Properties of Continuous Fiber/Epoxy/Aluminum Hybrid Composites for Aircraft Structures, Materials Research, Vol. 9, n. 3, pp. 247–256, 2006.
http://dx.doi.org/10.1590/s1516-14392006000300002
S.Asgarinia, C.Viriyasuthee, S. Philips, M.Dube, J.Baets, A. V.Vuure, I.Verpoest, L. Lessard, Tension-tension Fatigue Behaviour of Woven Flax/Epoxy Composites, Journal of Reinforced Plastics &Composites, Vol.34, n. 11, pp. 857-867, 2015.
http://dx.doi.org/10.1177/0731684415581527
T.Alomayri, H.Assaedi, F.U.A. Shaikh, I.M. Low, Effect of Water Absorption on the Mechanical Properties of Cotton Fabric-Reinforced Geopolymer Composites, Journal of Asian Ceramic Societies, Vol.2, pp. 223-230,2014.
http://dx.doi.org/10.1016/j.jascer.2014.05.005
H.P.S.Aabdul Khalil, C.W. Kang, A.Khairul, R.Ridzuan, T. Adawi, The Effect of Different Laminations on Mechanical and Physical Properties of Hybrid Composites, Journal of Reinforced Plastics and Composites,Vol.28, pp. 1123-1137, 2009.
http://dx.doi.org/10.1177/0731684407087755
Z.Salleh, Y. M.Taib, K. M.Hyie, M.Mihat, M. N.Berhan, M. A. Ghani, Fracture Toughness Investigation on Long Kenaf/Woven Glass Hybrid Composite Due to Water Absorption Effect, Procedia Engineering, Vol. 41, pp. 1667–1673, 2012.
http://dx.doi.org/10.1016/j.proeng.2012.07.366
M. T.Paridah, A. B. Basher, S.Saiful, Z. Ahmed, Retting Process of Some Bast Plant Fibers and Its Effect on Fiber Quality: A Review, Bio Resources, Vol.6, pp. 5260–5281, 2011.
http://dx.doi.org/10.1016/j.indcrop.2012.12.015
O.Faruk, A. K.Bledzki, H. P. Fink, M. Sain, Biocomposites Reinforced with Natural Fibers: 2000– 2010, Progress in Polymer Science, Vol.37, pp. 1552–1596, 2012.
http://dx.doi.org/10.1016/j.progpolymsci.2012.04.003
S. DharMalingam, An Investigation into the Forming Behavior of Metal Composite Hybrids. PhD Thesis. The Australian University, November 2011.
http://dx.doi.org/10.1533/9781845692537.197
D.Sivakumar,Sivaraos, M.Z.Selamat, M.R. Said, S. Kalyanasundaram, Effects of Process Parameters during Forming of Glass Reinforced Polypropylene based Sandwich Structure, Advances in Environmental Biology, Vol.8, n. 8, pp. 3143-3150, 2014.
http://dx.doi.org/10.4028/www.scientific.net/amm.789-790.131
J. G. Carrillo, W. J. Cantwell, Mechanical Properties of a Novel Fiber–Metal Laminate Based on a Polypropylene Composite, Mechanics of Materials, Vol. 41, n. 7, pp. 828–838. 2009.
http://dx.doi.org/10.1016/j.mechmat.2009.03.002
T.Sinmazçelik, E.Avcu, M.Ö. Bora, O. Çoban, A Review: Fibre Metal Laminates, Background, Bonding Types and Applied Test Methods, Materials & Design, Vol.32, n. 7, pp. 3671–3685, 2011.
http://dx.doi.org/10.1016/j.matdes.2011.03.011
S. DharMalingam, P. Compston, S. Kalyanasundaram, Process Variables Optimisation of Polypropylene Based Fibre-Metal Laminates Forming Using Finite Element Analysis, Key Engineering Materials, Vol. 410-411, pp. 263-269, 2009.
http://dx.doi.org/10.4028/www.scientific.net/kem.410-411.263
N. M. Ishak, S. D. Malingam, M. R. Mansor, Selection of Natural Fibre Reinforced Composites using Fuzzy VIKOR for Car Front Hood, International Journal of Materials and Product Technology, Vol. 53, n. ¾, pp. 267-284, 2016.
http://dx.doi.org/10.1504/ijmpt.2016.10000368
M.M.Thwe, K. Liao, Durability of Bamboo-Glass Fibre Reinforced Polymer Matrix Hybrid Composites, Composites Science and Technology, Vol. 63, pp. 375-387, 2003.
http://dx.doi.org/10.1016/s0266-3538(02)00225-7
L.B.Vogelesang, A. Vlot, Development of Fibre Metal Laminates for Advanced Aerospace Structures, Journal of Materials Processing Technology, Vol. 103, pp. 1-5, 2000.
http://dx.doi.org/10.1016/s0924-0136(00)00411-8
J.J. Homan, Fatigue Initiation in Fibre Metal Laminates, International Journal of Fatigue, Vol. 28, pp. 366–374, 2006.
http://dx.doi.org/10.1016/j.ijfatigue.2005.07.030
Q. Liu, J.B. Ma, L. Kang, K.Y. Sun, Q. Li, An Experimental Study on Fatigue Characteristics of CFRP-Steel Hybrid Laminates, Materials and Design, Vol. 88, pp. 643-650, 2015.
http://dx.doi.org/10.1016/j.matdes.2015.09.024
R.Ramli, R.Yunus, M.Beg, D. Prasad, Oil Palm Fiber Reinforced Polypropylene Composites: Effects of Fiber Loading and Coupling Agents on Mechanical, Thermal, and Interfacial Properties, Journal of Composite Material, Vol.46, n. 11, pp. 1275–1284,2011.
http://dx.doi.org/10.1177/0021998311417647
Y. L. Lee, J. Pan, R. B. Hathaway, M. E. Barkey, Fatigue Testing and Analysis (Theory and Practice). Elsevier Butterworth-Heinemann (United State of America, 2005).
http://dx.doi.org/10.1016/b978-0-7506-7719-6.50015-4
A. Shahzad, Impact and Fatigue Properties of Hemp-Glass Fibre Hybrid Biocomposites, Journal of Reinforced Plastics & Composites, Vol. 30, n. 16, pp.1389-1398, 2011.
http://dx.doi.org/10.1177/0731684411425975
S. Asgarinia, Fatigue Behaviour of Flax/Glass/Epoxy Hybrid Composites. Master Thesis. McGill University, June 2014.
http://dx.doi.org/10.1016/j.compscitech.2012.01.011
G.Reyes, H. Kang, Mechanical Behaviour of Lightweight Thermoplastic Fibre-Metal Laminates, Journal of Materials Processing Technology, Vol, 186, pp. 284-294, 2007.
http://dx.doi.org/10.1016/j.jmatprotec.2006.12.050
Refbacks
- There are currently no refbacks.
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize