Open Access Open Access  Restricted Access Subscription or Fee Access

Numerical Comparison of Drag Coefficient between Nacelle Lip-Skin with and without Bias Acoustic Liner


(*) Corresponding author


Authors' affiliations


DOI: https://doi.org/10.15866/ireme.v10i6.9427

Abstract


The paper demonstrates the drag coefficient on the nacelle lip skin with and without bias acoustic liner. It is acknowledged that bias acoustic liner potentially reduces the drag coefficient and enhances the fuel efficiency of the aircraft. In the present study,the geometric mesh modelling of nacelle lip-skin has been developed using GAMBIT pre-processor, and FLUENT 14.0 CFD code is employed to obtain the numerical results. According to the results, drag coefficient of nacelle lip reduces by 90.5% with bias acoustic liner as compared to drag coefficient of nacelle lip-skin without bias acoustic liner. Therefore, bias acoustic liner with bias flow has potential to reduce the drag coefficient apart from being utilized in hot air anti-icing.
Copyright © 2016 Praise Worthy Prize - All rights reserved.

Keywords


Drag Coefficient; Efficiency; Nacelle Lip-Skin; Acoustic Liner; Bias Acoustic Liner

Full Text:

PDF


References


J. Li, C.-H. Lee, L. Jia, and X. Li, "Numerical study on flow control by micro-blowing," in Proc. of 47th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Orlando, Florida (USA), 2009, pp. 1-19.
http://dx.doi.org/10.2514/6.2009-779

A. Kempton, "Acoustic liners for modern aero-engines," in 15th CEAS-ASC Workshop and 1st Scientific Workshop of X-Noise EV, 2011.

K. D. Kryter, The handbook of hearing and the effects of noise: Physiology, psychology, and public health: Academic Press, 1994.

S. Hosder, J. A. Schetz, B. Grossman, and W. H. Mason, "Airframe noise modeling appropriate for multidisciplinary design and optimization," AIAA Paper, vol. 698, 2004.
http://dx.doi.org/10.2514/6.2004-698

M. Tong, S. M. Jones, W. J. Haller, and R. F. Handschuh, "Engine conceptual design studies for a hybrid wing body aircraft," in ASME Turbo Expo 2009: Power for Land, Sea, and Air, 2009, pp. 109-117.
http://dx.doi.org/10.1115/gt2009-59568

E. Greitzer, "Design methodologies for aerodynamics structures weight and thermodynamic cycles, Final_Report, Vol. 2," ed: MIT, March, 2010.

"Aircraft Noise Issues."
http://dx.doi.org/10.5353/th_b3125528

https://www.faa.gov/about/office_org/headquarters_offices/apl/noise_emissions/airport_aircraft_noise_issues/

W. Babisch and I. Van Kamp, "Exposure-response relationship of the association between aircraft noise and the risk of hypertension," Noise and Health, vol. 11, p. 161, 2009.
http://dx.doi.org/10.4103/1463-1741.53363

E. Envia, A. G. Wilson, and D. L. Huff, "Fan noise: a challenge to CAA," International Journal of Computational Fluid Dynamics, vol. 18, pp. 471-480, 2004.
http://dx.doi.org/10.1080/10618560410001673489

J. P. Carneal and C. R. Fuller, "An analytical and experimental investigation of active structural acoustic control of noise transmission through double panel systems," Journal of Sound and Vibration, vol. 272, pp. 749-771, 2004.
http://dx.doi.org/10.1016/s0022-460x(03)00418-8

R. Mani, "Noise due to interaction of inlet turbulence with isolated stators and rotors," Journal of Sound and Vibration, vol. 17, pp. 251-260, 1971.
http://dx.doi.org/10.1016/0022-460x(71)90459-7

D. L. Huff, "Noise reduction technologies for turbofan engines," 35th International Congress and Exposition on Noise Control Engineering (INTER–NOISE 2006), Honolulu, HI, December 3–6, 2006.

Y. Cao, M. Y. Hussaini, and H. Yang, "Estimation of optimal acoustic liner impedance factor for reduction of radiated engine noise," International Journal of Numerical Analysis and Modeling, vol. 4, pp. 116-126, 2007.

M. Ismail, S. M. Firdaus, S. Soid, M. Khalil, and H. Yusoff, "Numerical Investigation on Uniformity of Heat Distribution of Swirl Anti-Icing System," Indian Journal of Science and Technology, vol. 8, 2015.
http://dx.doi.org/10.17485/ijst/2015/v8i30/87312

M. Ismail and M. Abdullah, "Applying Computational Fluid Dynamic to Predict the Thermal Performance of the Nacelle Anti-Icing System in Real Flight Scenarios," Indian Journal of Science and Technology, vol. 8, 2015.
http://dx.doi.org/10.17485/ijst/2015/v8i30/86058

D. P. Hwang, "Skin friction reduction by micro-blowing technique," ed: Google Patents, 1998.
http://dx.doi.org/10.2514/2.390

C.-C. Rossow and H. Hoheisel, "Numerical study of interference effects of wing-mounted advanced engine concepts," in ICAS-94-6.4. 1, 19th Congress of the International Council of the Aeronautical Sciences, 18.-28.9. 1994, Anaheim, California, USA, 1994., 1994.

J. Li and F. Li, "Numerical simulation of transonic flow over wing-mounted twin-engine transport aircraft," Journal of Aircraft, vol. 37, pp. 469-478, 2000.
http://dx.doi.org/10.2514/2.2621

R. Rudnik, C.-C. Rossow, and H. F. v. Geyr, "Numerical simulation of engine/airframe integration for high-bypass engines," Aerospace Science and Technology, vol. 6, pp. 31-42, 2002.
http://dx.doi.org/10.1016/s1270-9638(01)01139-7

D. P. Hwang, "A proof of concept experiment for reducing skin friction by using a micro-blowing," 35th Aerospace Sciences Meeting and Exhibit, Reno, Nevada, January 6-9, 1997.
http://dx.doi.org/10.2514/6.1997-546

S. R. Allmaras and F. T. Johnson, "Modifications and clarifications for the implementation of the Spalart-Allmaras turbulence model," in Seventh International Conference on Computational Fluid Dynamics (ICCFD7), 2012, pp. 1-11.

S. Deck, P. Duveau, P. d'Espiney, and P. Guillen, "Development and application of Spalart–Allmaras one equation turbulence model to three-dimensional supersonic complex configurations," Aerospace Science and Technology, vol. 6, pp. 171-183, 2002.
http://dx.doi.org/10.1016/s1270-9638(02)01148-3


Refbacks




Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize