Open Access Open Access  Restricted Access Subscription or Fee Access

Automation of Pneumatic Actuators for Testing of Small-Specimens Using Mini Load-Frames


(*) Corresponding author


Authors' affiliations


DOI: https://doi.org/10.15866/ireme.v10i6.8808

Abstract


Quasi-static and dynamic tests are an essential tool to study the performance of materials and structures. The results of these tests allow analyzing the behavior of the specimen in accordance with the type and magnitude of the stress acting on the specimen. Pneumatic actuators are a suitable option to simulate quasi-static loading on small specimens, since their cost is low when compared with other actuators. This article shows the results of the automation for pneumatic actuators attached to a mini load-frame. The characteristics and response of the mini load-frame system are initially described and discussed. It is then described the design of the control systems such as a classic PID and a self-tuning regulator, as well as the data acquisition and displaying systems. Finally, there are shown the results of tests executed in a real environment, operating the fully automated system and having implemented the force and displacement controls. The proposed automation for the pneumatic actuators is practical, low-cost and  it increases the competitiveness, relevance, and validity of the results obtained by the various tests of materials and small structures.
Copyright © 2016 Praise Worthy Prize - All rights reserved.

Keywords


Automation; Pneumatic Actuator; Quasi-Static Loading; Pneumatic System; Control System

Full Text:

PDF


References


R. Goldner and P. Zerigian, "Electromagnetic Linear Generator and Shock Absorber", U.S. Patent 6,952,060 B2, Oct 4, 2005.

Amer, N., Ramli, R., Wan Mahadi, W., Zainul Abidin, M., Isa, H., Foong, S., Implementation of LQR Controller on Electromagnetic Suspension System for Passenger’s Car, (2014) International Review of Mechanical Engineering (IREME), 8 (1), pp. 258-264.

Attia, E., Mohamed, M., Maharem, N., Effect of Road Excitation on the Vehicle Vibrations Suspended by Electro-Rheological Damper, (2013) International Review of Mechanical Engineering (IREME), 7 (3), pp. 408-424.

B. Lafarge, O. Curea, A. Halcala, B. Talon, "Modeling of an electromechanical energy harvesting system integrated in car dampers", in Research and Innovation For Transport Systems of the Future, Paris, France, 2012.

L. Zuo, P-S. Zhang, "Energy Harvesting, Ride Comfort, and Road Handling of Regenerative Vehicle Suspensions", Journal of Vibration and Acoustics, vol 135, Feb 2013, Siemens AG. ASME.
http://dx.doi.org/10.1115/1.4007562

X.Zhen, F. Yu , Y. ZHang, "A novel Energy-regenerative Active Suspension for Vehicles", The National Natural Science Foundation of China, J. Shanghai JiaotongUniv, vol 13 (2), pages 184-188, 2008.
http://dx.doi.org/10.1007/s12204-008-0184-7

G. Zhang, J. Cao, F. Yu, " Design of active and energy-regenerative controllers for DC-motor-based suspension", Mechatronics, ELSevier, Online Publication,8 November, 2012.
http://dx.doi.org/10.1016/j.mechatronics.2012.09.007

Wang, X., Xiao, H., Dimensionless Analysis and Optimization of Piezoelectric Vibration Energy Harvester, (2013) International Review of Mechanical Engineering (IREME), 7 (4), pp. 607-624.

S. Zhu, W. Shen, Y. Xu, " Linear electromagnetic devices for vibration damping and energy harvesting: Modeling and testing ", Engineering Structures, Vol 34, Enero, 2012.
http://dx.doi.org/10.1016/j.engstruct.2011.09.024

S. Huang, H. Chen, C. Chung, C. Chu, G. Li, C. Wu, " Multivariable direct-drive linear generators for wave energy ", Applied Energy, Vol 100, Diciembre, 2012.
http://dx.doi.org/10.1016/j.apenergy.2012.03.038

R. U. Patil, S. S. Gawade, "Design and Static Magnetic Analysis of Electromagnetic Regenerative Shock Absorber", International Journal of Advanced Engineering Technology, Vol 3, No. 2, Abril – Junio, 2012.

Z. Longxin, W. Xiaogag, " Structure and Performance Analysis of Regenerative Electromagnetic Shock Absorber", Journal of Networks, Academy Publisher, Vol 5, No. 12, December, 2010.
http://dx.doi.org/10.4304/jnw.5.12.1467-1474

A. Gupta, M. Jendrzejczyk, M. Mulcahy, J. R. Hull, “Design of electromagnetic shock absorbers”, Springer Science+Bussiness Media, Published online since 22 May 2007.

“Simulation of a Spring Mass Damper System Using Matlab”, Department of Mechanical Engineering, University of Lagos, Akoka,Nigeria, 2009.

Esteban Chávez Conde, Francisco Beltrán Carbajal Antonio Valderrábano González and Ramón Chávez Bracamontes (2011). Generalized PI Control of Active Vehicle Suspension Systems with MATLAB, Applications of MATLAB in Science and Engineering, Prof. Tadeusz Michalowski (Ed.), ISBN: 978-953-307-708-6, InTech, Available from: http://www.intechopen.com/

Nicola Amati, Andrea Festini& Andrea Tonoli (2011) Design of electromagnetic shock absorbers for automotive suspensions, Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility, vol 49, n°12, pages 1913-1928. 2011.
http://dx.doi.org/10.1080/00423114.2011.554560

Abhijit Gupta, “Electromagnetic Shock Absorbers,” International Journal of Vehicle Designs, Vol. 24, Nos. 2/3, 2000, pp. 182-197.

BabakEbrahimi, “Development of Hybrid Electromagnetic Dampers for Vehicle Suspension Systems”, Thesis, Doctor of Philosophy in Mechanical Engineering, University of Waterloo. 2007.

B. T. Fijalkowski, “Automotive Mechatronics: Operational and Practical Issues”, Volume II, Active Suspensions Chapter 5.2, Ed. Springer, 2011.
http://dx.doi.org/10.1007/978-94-007-1183-9_15

Y. ZHang, F, Yu, K. Huang, "Active Controller Design for an Electromagnetic Energy-Regenerative Suspension", International Journal of Automotive Technology, Vol 12, No 6, pp 877 - 885, 2011.
http://dx.doi.org/10.1007/s12239-011-0100-2

Y. Park, H. Song, H. Lee, M. Kim, Small-capacity deadweight force standard machine compensating loading frame, Measurement, Volume 45, Issue 1, January 2012, Pages 68-73.
http://dx.doi.org/10.1016/j.measurement.2011.09.023


Refbacks

  • There are currently no refbacks.



Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize