The Effect of Orientation of Short Fibers in the Diluted Suspension for Thermoplastic

I. Modhaffar; K. Gueraoui; S. Men-La-Yakhaf; H. El-Tourroug

doi:10.15866/ireme.v10i1.7564

The Effect of Orientation of Short Fibers in the Diluted Suspension for Thermoplastic

I. Modhaffar⁽¹⁾, K. Gueraoui^(2*), S. Men-La-Yakhaf⁽³⁾, H. El-Tourroug⁽⁴⁾

^(*) Corresponding author

Authors' affiliations

DOI: https://doi.org/10.15866/ireme.v10i1.7564

Abstract

The main objective of this paper is to review the effect of the orientation of short fibers in a thermoplastic matrix by numerical simulation in order to predict in the future the orientation during the injection of the molding composite polymer. In general, the fiber orientation involves analyzing coupled flow, temperature, free-motion surface and the kinematic fibers of the equation for the flow direction. The kinematics of a group of fibers are described in terms of second order tensor orientation. Models of Jeffery, Folgar-Tucker and the kinematics recent fiber orientation are discussed.
Copyright © 2016 Praise Worthy Prize - All rights reserved.

Keywords

Injection; Composites; Short-Fiber Reinforced Thermoplastics; Fiber Orientation; Numerical Simulation

Full Text:

PDF

References

Jeffery G. B., The Motion of Ellipsoidal Particles Immersed in a Viscous Fluid, Proceedings of the Royal Society of London. Series A, Vol. 102(No. 715): 1922, pp. 161-179 .
http://dx.doi.org/10.1098/rspa.1922.0078

Lipscomb G.G., Analysis of suspension Rheology in complex flows, Ph.D. dissertation, University of California, Berkeley, 1987.

Vincent M., Devilers E., and Agassant J. F., Fiber orientation in injection molding of reinforced thermoplastics, Journal of Non Newtonian Fluid Mechanics, 73, 1997, pp. 317-326.
http://dx.doi.org/10.1016/s0377-0257(97)00048-7

Folgar F., Tucker C.L., Orientation behavior of fibers in concentrated suspensions, J Reinf Plast Compos , 1984,3:98 – 119.
http://dx.doi.org/10.1177/073168448400300201

Prager S. , Stress-strain relation in a suspension of dumbells, Trans. Soc. Rheol.,1 , 1994,pp 53.

Hand G.L., A theory of anisotropic fluids. Journal of Fluid Mechanics, 13 : pp 3346, (1962)
http://dx.doi.org/10.1017/s0022112062000476

Bay R. S., Fiber orientation in injection moulded composites A comparison of theory and experiment, Ph.D. dissertation, Universit y of Illinois at Urbana-Champagne, 1991.

C. Carrot, J. Guillet."Viscoélasticité non linéaire des polymères fondus", Tech. Ing., AM1630.

Chapman A., Saad Y., Wigton L., High order ILU preconditionners for CFD problems". Rapport technique, AMSI, Minesota Supercomputer Institute, 1996.

Chorin A.J., Numerical solution of the Navier-Stokes equations, Math. Comp. 22, 1968.
http://dx.doi.org/10.1090/s0025-5718-1968-0242392-2

Advani, S. G. and C. L. Tucker, "A Numerical Simulation of Short Fiber Orientation in Compression Molding," Polym. Compos. 11, 164-173 (1990b).
http://dx.doi.org/10.1002/pc.750110305

Altan, M. c., S. Subbiah, S. I. Guceri, and R. B. Pipes, "Numerical Prediction of ThreeDimensional Fiber Orientation in Hele-Shaw Flows," Po1ym. Eng. Sci. 30, 848-859 (1990) .
http://dx.doi.org/10.1002/pen.760301408

Givler, R. C; M. J. Crochet, and R. B. Pipes, "Numerical Prediction of Fiber Orientation inDilute Suspensions," J. Compos. Mater. 17, 330-343 (1983).
http://dx.doi.org/10.1177/002199838301700404

Halpin, J. C. and J. L. Kardos, "Strength of Discontinuous Reinforced Composites: 1 Fiber Reinforced Composites," Polym, Eng. Sci. 18, 496--xxx (1978).
http://dx.doi.org/10.1002/pen.760180612

McGee, S. H., "The Influence of Microstructure on the Elastic Properties of Composite Materials," Ph.D. thesis, University of Delaware, Newark, 1982.

A. Clarke, N. Davidson, and G. Archenhold. Measurements of fibre direction in reinforced polymer composites. Journal of Microscopy, 171(1) :69, 1993.
http://dx.doi.org/10.1111/j.1365-2818.1993.tb03359.x

C. Eberhardt and A.R Clarke. Fibre orientation measurements in short glass fiber composites : I automated high angular resolution measurement by confocal microscopy. Composite Sciences Technology, 61 :1389, 2001.
http://dx.doi.org/10.1016/s0266-3538(01)00038-0

Men-la-yakhaf, S., Gueraoui, K., Maaouni, A., Driouich, M., Numerical and mathematical modeling of reactive mass transfer and heat storage installations of argan waste, (2014) International Review of Mechanical Engineering (IREME), 8 (1), pp. 236-240.
http://dx.doi.org/10.15866/ireme.v8i1.1265

S. Men-la-yakhaf, K. Gueraoui, M. Driouich, New numerical and mathematical code reactive mass transfer and heat storage facilities of argan waste, Advanced Studies in Theoretical Physics, (2014), Vol. 8, no. 10, 485-498.

H.El-Tourroug, K.Gueraoui, N.Hassanain, I.Modhaffar, S.Men-La-Yakhaf, Numerical and mathematical modeling of the injection for incompressible fluids through rigid cylindrical duct: Application of melted polymers PPH .Advanced Studies in Theoretical Physics, (2014), Applied Mathematical Sciences, Vol. 8, 2014, no. 180, 8953 – 8964.

Gueraoui K., Hammoumi A., Zeggwagh G., Ecoulements pulsés de fluides inélastiques en conduites déformables poreuses et anisotropes, C.R. Acad. Sci., Paris, 323, série B, 1996, 825-832.
http://dx.doi.org/10.1051/lhb/1998075

Ghouli, A., Gueraoui, K., Walid, M., Aberdane, I., Hammoumi, A.E., Kerroum, M., Zeggwagh, G., Haddad, Y.M., Numerical study of pollutant propagation process in homogeneous porous unsaturated media, (2009) International Review of Mechanical Engineering (IREME), 3 (3), pp. 358-361.

Driouich, M., Gueraoui, K., Haddad, Y.M., Hammoumi, A.E., Kerroum, M., Fehri, O.F., Mathematical modeling of non permanent flows of molten polymers, (2010) International Review of Mechanical Engineering (IREME), 4 (6), pp. 689-694.

Driouich, M., Gueraoui, K., Haddad, Y.M., Sammouda, M., El Hammoumi, A., Kerroum, M., Taibi, M., Fassi Fehri, O., Numerical and theoretical modelling of unsteady flows for incompressible fluid in rigid conducts. Application to molten polymers flow, (2010) International Review on Modelling and Simulations (IREMOS), 3 (6), pp. 1317-1323.

Sammouda, M., Gueraoui, K., Driouich, M., El Hammoumi, A., Brahim, A.I., The variable porosity effect on the natural convection in a non-darcy porous media, (2011) International Review on Modelling and Simulations (IREMOS), 4 (5), pp. 2701-2707.

M. Driouich, K. Gueraoui, M. Sammouda, Y.M. Haddad, A New Numerical Code to Study the Flow of Molten Polymers In Elastic Pipes. AES-ATEMA International Conference Series - Advances and Trends in Engineering Materials and their Applications, 2011

M. Driouich, K. Gueraoui, M. Sammouda, Y. M. Haddad, I. Aberdane, The Effect of Electric Field on the Flow of a Compressible Ionized Fluid in a Cylindrical Tube. Adv. Studies Theor. Phys., Vol. 6, 2012, no. 14, 687-696

M. Driouich, K. Gueraoui, M. Sammouda, Y. M. Haddad, The Effect of the Rheological Characteristics of the Molten Polymer on its Flow in Rigid Cylindrical Tubes. Adv. Studies Theor. Phys., Vol. 6, 2012, no. 12, 569-586

Sammouda, M., Gueraoui, K., Driouich, M., El-Hammoumi, A., Iben Brahim, A., Non-Darcy natural convection heat transfer along a vertical cylinder filled by a porous media with variable porosity, (2012) International Review of Mechanical Engineering (IREME), 6 (4), pp. 698-704.

Sammouda, M., Gueraoui, K., Driouich, M., Ghouli, A., Dhiri, A., Double diffusive natural convection in non-darcy porous media with non-uniform porosity, (2013) International Review of Mechanical Engineering (IREME), 7 (6), pp. 1021-1030.

R. Chammami, M. Taibi, M. Hami,,(...),K. Gueraoui, G. Zeggwagh, Influence de la nature de la paroi sur un modè d'écoulements pulsés de fluides diphasiques. Application à la microcirculation | [Influence of the kind of duct on two-fluid pulsatile flows model. Application to the microcirculation], Houille Blanche, 2001
http://dx.doi.org/10.1051/lhb/2001030

M. Taibi, R. Chammami, M. Kerroum, K. Gueraoui,A. El Hammoumi, G. Zeggwagh, Modélisations des écoulements pulsés à deux phases, en conduites déformables ou rigides | [Pulsating flow of two phases in deformable or rigide tubes], ITBM-RBM, 2002
http://dx.doi.org/10.1016/s1297-9562(02)80012-2

Aberdane, I., Gueraoui, K., Taibi, M., Ghouli, A., El-Hammoumi, A., Cherraj, M., Kerroum, M., Walid, M., Fihri, O.F., Haddad, Y.M., Two-dimensional theoretical and numerical approach of pollutant transport in the lowest layers of the atmosphere, (2009) International Review of Mechanical Engineering (IREME), 3 (4), pp. 494-502.

El Khaoudi, F., Gueraoui, K., Driouich, M., Sammouda, M., Numerical and theoretical modeling of natural convection of nanofluids in a vertical rectangular cavity, (2014) International Review on Modelling and Simulations (IREMOS), 7 (2), pp. 350-355.
http://dx.doi.org/10.15866/iremos.v7i2.585

K. Gueraoui, A.Hammoumi, G. Zcggvvagh, Resolution numerique d'ecoulements pulses de fluides inelastiques en conduites viscoelastiques poreuses et anisotropes | [A numerical solution of pulsatile flow of an inelastic fluid through anisotropic porous viscoelastic pipes]. Houille Blanche, 1998
http://dx.doi.org/10.1051/lhb/1998075

Refbacks

There are currently no refbacks.

Username
Password
Remember me