Surface Modification of Mild Steel with Molybdenum Disulfide by Tungsten Inert Gas
(*) Corresponding author
DOI: https://doi.org/10.15866/ireme.v8i6.4424
Abstract
Surface modification of mild steel was carried out with molybdenum disulfide powder using Tungsten Inert Gas (TIG) method. This paper presents the microstructure developed after the molybdenum disulfide coating on mild steel and also the effects of Tungsten Inert Gas method on the hardness of the mild steel. The microstructure of the molybdenum disulfide coating was studied by using Metallurgical Microscope fitted with Pixel Fox smart microscope digital camera and Rockwell Hardness Test was used to measure the hardness. A hard, wear resistant and metallurgically bonded surface coating was developed on the mild steel.
Copyright © 2014 Praise Worthy Prize - All rights reserved.
Keywords
Full Text:
PDFReferences
S.Dyuti, S.Mridha, S.K.Shaha, Surface Modification of Mild Steel Using Tungsten Inert Gas Torch Surface Cladding, American Journal of Applied Sciences 7 (6), (2010) 815-822.
http://dx.doi.org/10.3844/ajassp.2010.815.822
T.I. Khan, S.A. Rizvi, K. Matsuura, The effect on wear behaviour of H13 tool steel surfaces modified using a tungsten arc heat source,Wear, 244 (2000) 154-164.
http://dx.doi.org/10.1016/s0043-1648(00)00453-1
Rathinam, V., Kannan, T., Optimization of ferrite number of solution annealed duplex stainless steel claddings using integrated artificial neural network - Genetic algorithm, (2013) International Review of Mechanical Engineering (IREME), 7 (7), pp. 1366-1377.
K. Bewilogua, G. Brauer, A. Dietz, J.Gabler, G. Goch, B. Karpuschewski, B. Szyszka, Surface technology for automotive engineering, CIRP Annals - Manufacturing Technology, 58 (2009) 608-627.
http://dx.doi.org/10.1016/j.cirp.2009.09.001
Jyotsna Dutta Majumdar, Development of wear resistant composite surface on mild steel by laser surface alloying with silicon and reactive melting, Materials Letters 62 (2008) 4257-4259.
http://dx.doi.org/10.1016/j.matlet.2008.06.042
Juan de Damborenea, Surface modification of metals by high power lasers, Surface and Coating Technology, 100-101 (1998) 377-382.
http://dx.doi.org/10.1016/s0257-8972(97)00652-x
Osman Nuri Celik, Mustafa Ulutan, Hakan Gasan, Ümit Er, Soner Buytoz, Effects of graphite content on the microstructure and wear properties of an AISI 8620 steel surface modified by tungsten inert gas (TIG), Surface & Coatings Technology 206 (2011) 1423–1429.
http://dx.doi.org/10.1016/j.surfcoat.2011.09.009
Refbacks
- There are currently no refbacks.
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize