Mathematical Model for Drilled Hole Surface Roughness of Al/Sic Metal Matrix Composites

Abstract

Metal matrix composites (MMC), in particular, Aluminium Silicon Metal Matrix Composites (ASMMCs) are the materials which combine tough metallic matrix with a hard ceramic reinforcement with superior properties such as high strength to wear ratio, high modulus, superior wear resistance and corrosion resistance. The drilling of Al/SiC metal matrix composite has received a serious attention for many years. As a consequence of the widening range of applications of MMCs, the machining of these materials has become a very important subject for research. So, it is more necessary to predict the surface roughness of the materials. A lot of researchers have been contributed in predicting the surface roughness of the materials. However, many of them failed since the input model and output categorization varies. Some of the research are ANN model for predicting surface roughness from machining parameters such as cutting speed, feed rate, and depth of cut. Another model is hybrid modeling approach, based on the group method of data handling and the differential evolution population-based algorithm, for modeling and predicting surface roughness in turning operations. But it is difficult to calculate the optimal cutting conditions for the considered material and tool. Also the neural network model coupled with the GA is proposed to determine the optimal machining for surface roughness. But, all these methods fail as there is a large variation in input model and output. Moreover, a recent research was conducted in predicting the surface roughness of materials. This predictive model of surface roughness is created by using back propagation neural network and EM (Electromagnetism) optimization algorithm is used to optimize the problem. The research showed that the EM algorithm coupled with back propagation neural network is an efficient and accurate method in obtaining the minimum of surface roughness. However, in order to further reduce the variation between input model and output, we proposed a feed forward neural network model using APSO (Adaptive particle swarm optimization) algorithm. Our proposed prediction model using APSO algorithm is a very efficient method in decreasing the variation between input model and output than the conventional PSO algorithm. Also, our proposed model minimizes the error to a greater extent than any other method.
Copyright © 2014 Praise Worthy Prize - All rights reserved.