Email this article 
Open Access
Subscription or Fee Access
Efficiency Assessment of the Hydrodynamic Torque Converter by Means of Using the Expert System
(*) Corresponding author
DOI: https://doi.org/10.15866/ireme.v8i6.4196
Abstract
The paper presents the expert system to assist the process of maximum efficiency assessment using the hydrodynamic torque converter. The system has been created with typical modules such as knowledge base, user interface and inference engine. The analysis and synthesis of experimental research have been made in order to build the knowledge base. The data has been saved in the form of facts. The system operation has been presented on the basis of design parameter values. It has been proved that, it is possible to apply the knowledge based system in the process of hydrodynamic torque converter modelling.
Copyright © 2014 Praise Worthy Prize - All rights reserved.
Keywords
References
A. Kęsy, Z. Kęsy, Damping Characteristics of a Transmission System With a Hydrodynamic Torque Converter, Journal of Sound and Vibration, Vol. 166, n. 3, pp. 493- 506, 1993.
http://dx.doi.org/10.1006/jsvi.1993.1308
Z. Kęsy, A. Kęsy, Dynamic Aspects of a Hydrodynamic Torque Converter Working in a Transmission System, International Journal of Machine Vibration 4, pp. 152-160, 1995.
http://dx.doi.org/10.1006/jsvi.1993.1308
Z. Kęsy, A. Kęsy, Dynamic Aspects of Torque Converter Working in Driveline. International Conference on Vibration and Noise, Venice, 1995.
C. Szczepaniak, Z. Kęsy, A. Kęsy, Damping Performance of Power Transmission System with Hydraulic Torque Converter, Vehicle System Dynamics 20 (5), pp. 283- 295, 1991.
http://dx.doi.org/10.1080/00423119108968990
A. Kęsy, A. Kądziela, Construction optimization of hydrodynamic torque converter with application of genetic algorithm, Archives of Civil and Mechanical Engineering, Vol. 11, Issue 4, pp. 905- 920, 2011.
http://dx.doi.org/10.1016/s1644-9665(12)60086-7
A. Kęsy, Z. Kęsy, A. Kądziela, Estimation of Parameters for a Hydrodynamic Transmission System Mathematical Model with the Application of Genetic Algorithm, Solids Mechanics and its Application, Vol. 117, pp. 143- 152, 2004.
http://dx.doi.org/10.1007/1-4020-2267-0_14
Z. Kęsy, Hydrodynamic torque converter controlled by working fluid properties, (Wyd. I, Wydawnictwo Politechniki Radomskiej, 2003).
A. Kęsy, Identification and optimization of hydrodynamic transmission system, (Wyd. I, Wydawnictwo Politechniki Radomskiej, 2004).
W. Deng, M. Lu, G. Liang Lu, Z. Qing Cui, X. Qiang Yang, The Development of Fault Diagnosis Expert System for High Speed Construction Machinery Based on Portable Data Terminal, Advanced Materials Research, Vol. 301- 303, pp. 1178- 1182, 2011.
http://dx.doi.org/10.4028/www.scientific.net/amr.301-303.1178
V. Kontargyri, C. Tsirekis, S. Kabanaros, A. Sakarellos, A. Moronis, N. Kolliopoulos, S. Kaminaris, An expert system for fault diagnosis, repairing and maintenance of electrical machines, Proc. 6th conference on Applications of electrical engineering, Stevens Point, 2007, pp. 166-171.
T. Gonciarz, An Expert System for Supporting the Design and Selection of Mechanical Equipment for Recreational Crafts, International Journal on Marine Navigation and Safety of Sea Transportation, Vol. 8, pp. 275- 280, 2014.
http://dx.doi.org/10.12716/1001.08.02.13
Tan, C., Kher, V.K., A fault diagnosis system for industry pipe manufacturing process, (2012) International Review of Mechanical Engineering (IREME), 6 (6), pp. 1292-1296.
Tan, C.F., Ranjit, S.S.S., Kher, V.K., An expert carbide cutting tools selection system for CNC Lathe machine, (2012) International Review of Mechanical Engineering (IREME), 6 (7), pp. 1402-1405.
K. Osowski, M. Migus, A. Kęsy, Expert system for supporting the process of hydrodynamic torque converter construction, Technical Transactions. Mechanics, Issue 1-M (5), pp. 285- 292, 2013 (110).
T. Ishihara, Studies of Hydraulic Torque Converter, Transactions of the Japan Society of Mechanical Engineers, Vol. 21, n. 101, pp. 61- 67, 1955.
http://dx.doi.org/10.1299/kikai1938.21.61
V. J. Jandasek, The design of a single-stage three-element torque converter, Society of Automotive Engineers, Vol. 7, 1961.
http://dx.doi.org/10.4271/610576
A. Kesy, Z. Kesy, M. R. Jackson, R. M. Parkin, Improvement in Hydrodynamic Torque Converter Design Process, (2008) International Review of Mechanical Engineering (IREME), 2 (4), pp. 592-598.
J. C. Giarratano, G. Riley, Expert Systems, (3rd, PWS Publishing Co. Boston, MA, USA, 1998).
P. Jackson, Introduction to Expert Systems, (2nd, Addison-Wesley Longman Publishing Co., Inc. Boston, MA, USA, 1990).
S. Ceri, G. Gottlob, L. Tanca, Logic Programming and Databases, (1st, Springer Publishing Company, Incorporated, 2012).
http://dx.doi.org/10.1007/978-3-642-83952-8
Refbacks
- There are currently no refbacks.
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize
