A Study on the PSO Model Based Fast Track Total Productive Maintenance for Small and Tiny Enterprises

G. Ananth; B. K. Vinayagam

doi:10.15866/ireme.v8i5.3533

A Study on the PSO Model Based Fast Track Total Productive Maintenance for Small and Tiny Enterprises

G. Ananth^(1*), B. K. Vinayagam⁽²⁾

^(*) Corresponding author

Authors' affiliations

DOI: https://doi.org/10.15866/ireme.v8i5.3533

Abstract

The Significance of Total Productive Maintenance (TPM), its applicability in small and tiny enterprises (STEs), the condition of the STEs, their survival problems, lack of any modern management/maintenance methodology that helps improve the productivity are what the driving forces of this work. A fast track version is designed, considering Critical Success Factors (CSF) and it can be called as FAST TRACK Total Productive Maintenance (FT-TPM), without diluting the essence of original TPM, in this study. The study is also an attempt to develop a mathematical model called Particle Swarm Optimization (PSO) specifically for the STEs. Thus, the model developed can be handled/extrapolated /interpolated in various manners, so that selective parameters may be altered to improve productivity and Synthetic Data Generation (SDG) may be done for further enhancement.
Copyright © 2014 Praise Worthy Prize - All rights reserved.

Keywords

TPM; FT-TPM; CSF; STEs; SDG; PSO; Mathematical Model; Productivity

Full Text:

PDF

References

Nakajima, S. (1986),”TPM a challenge to the improvement of productivity by small group activities'', Maintenance Management International, Edition No. 6, pp. 73-83.

Nakajima, S. (1988), Introduction to Total Productive Maintenance, Productivity Press, Cambridge, MA.

Nakajima, S. (1989), TPM Development Programme: Implementing Total Productive Maintenance, Productivity Press, Cambridge, MA.

James Kennedy and Russell Eberhart,’ Particle Swarm Optimization’, IEEE, ,1995, pp 1942-1948
http://dx.doi.org/10.1016/b978-155860595-4/50007-3

Ireland and B.G. Dale, "A study of total productive maintenance implementation”, Journal of Quality in Maintenance Engineering, Vol. 7 No. 3, 2001, pp.183-19,
http://dx.doi.org/10.1108/13552510110404495

Kristy O. Cua, Kathleen E. McKone and Roger G. Schroeder, "Relationships between implementation of TQM, JIT, and TPM and manufacturing performance", Journal of Operations Management, Vol.19, 2001, pp.675-694
http://dx.doi.org/10.1016/s0272-6963(01)00066-3

Kathleen E. McKone, Roger G. Schroeder and Kristy O. Cua, "The impact of total productive maintenance practices on manufacturing performance”, Journal of Operations Management, Vol.19, 2001,pp.39-58,
http://dx.doi.org/10.1016/s0272-6963(00)00030-9

Abhijit Gosavi, "A risk-sensitive approach to total productive maintenance", Automatica, Vol.42,, 2006, pp.1321-1330
http://dx.doi.org/10.1016/j.automatica.2006.02.006

.Jörn-Henrick Thun, (2006) Maintaining preventive maintenance and maintenance prevention: analysing the dynamic implications of Total Productive Maintenance, John Wiley & Sons, Ltd. Syst. Dyn. Rev. 22, 163–179,
http://dx.doi.org/10.1002/sdr.335

Renuka Thota, Dr.N.Suren Dwivedi, Total Product Maintenance in Lean Manufacturing, Proceedings of the 2006 ASEE Gulf-Southwest Annual Conference, Southern University and A&M College, American Society for Engineering Education.

Halim Mad Lazim, T. Ramayah and Norzieiriani Ahmad, Total Productive Maintenance And Performance: A Malaysian SME Experience, International Review of Business Research Papers, Vol 4 No. 4 Aug – Sept 2008, Pp.237-250

Rajesh Prasad Mishra, G. Anand, Rambabu Kodali, A SWOT analysis of total productive maintenance frameworks, Int. J. Management Practice, Vol. 3, No. 1, 2008.
http://dx.doi.org/10.1504/ijmp.2008.016047

Hugo Jair Escalante.etal Particle Swarm Model Selection, Journal of Machine Learning Research 10, 2009,405-440.

B. Gajdzik, “Introduction Of Total Productive Maintenance In Steelworks Plants”, Metalurgija, Vol. 48, No. 2, 2009, pp. 137-140

Kamran Shahanaghi , Seyed Ahmad Yazdian, Analyzing the effects of implementation of Total Productive Maintenance (TPM) in the manufacturing companies: a system dynamics approach, World Journal of Modelling and Simulation, Vol. 5 (2009) No. 2, pp. 120-129

S.Fore, L.Zuze, Improvement of Overall Equipment Effectiveness through TPM, World Academy of Science, Engineering and Technology 61, 2010

Osama Taisir R.Almeanazel, Total Productive Maintenance Review and Overall Equipment Effectiveness Measurement, Jordan Journal of Mechanical and Industrial Engineering, Volume 4, Number 4, September 2010 ISSN 1995-6665 Pages 517 – 522

N.F. Wang and Tai, "Target matching problems and an adaptive constraint strategy for multi objective design optimization using genetic algorithms”, Computers and Structures, Vol.88, 2010 , pp.1064-1076,
http://dx.doi.org/10.1016/j.compstruc.2010.06.002

I.P.S. Ahuja, Manufacturing Excellence Through Total Productive Maintenance Paradigm, Int. J. Technology, Policy and Management, Vol. 11, No. 1, 2011.
http://dx.doi.org/10.1504/ijtpm.2011.040298

K. C. Ng, G. G. G. Goh and U. C. Eze, "Total Productive Maintenance in a Semiconductor Manufacturing Firm: An Empirical Analysis ",In proc of IEEE International Conference on Industrial Engineering and Engineering Management (IEEM),pp.829-833,2011
http://dx.doi.org/10.1109/ieem.2011.6118032

Ravikant V. Paropate, Shrikant R. Jachak and Prasad A. Hatwalne, “Implementing Approach of Total Productive Maintenance in Indian Industries & Theoretical Aspect: An overview”, International journal Of Advanced Engineering Sciences And Technologies, Vol. 6, No. 2,, 2011, pp. 270 - 276

Abhijit Gosavi, Susan L. Murray, V. Mohamed Hassan, “Modeling an Oil Drilling Rig Total Productive Maintenance System Using Causal Loop Diagram Simulation”, CPMR-International Journal of Technology, Vol. 2, No. 2, December 2012, pp. 17-26,

Khairul Hafiz Norddin Mohd Norddin and Muhamad Zameri Mat Saman, “Implementation of Total Productive Maintenance Concept In A Fertilizer Process Plant”, Jurnal Mekanikal, No 34, 2012, pp. 66-82,

Badli Shah M.Y, “Total Productive Maintenance: A Study of Malaysian Automotive SMEs” Proceedings of the World Congress on Engineering , WCE 2012, July 4 - 6, 2012, London, U.K. Vol. III, 2012

Ranteshwar Singh, Ashish M Gohil, Dhaval B Shah and Sanjay Desai, “Total Productive Maintenance (TPM) Implementation in a Machine Shop: A Case Study”, in proceedings of 3rd Nirma University International Conference on Engineering, Procedia Engineering, Vol.51, 2013, pp. 592-599
http://dx.doi.org/10.1016/j.proeng.2013.01.084

Ananth, G., Vinayagam, B.K., A genetic algorithm based total productive maintenance model in comparison with neural networks for small and tiny enterprises, (2013) International Review on Modelling and Simulations (IREMOS), 6 (1), pp. 181-188.

Altosole, M., Boote, D., Brizzolara, S., Viviani, M., Integration of numerical modeling and simulation techniques for the analysis of towing operations of cargo ships, (2013) International Review of Mechanical Engineering (IREME), 7 (7), pp. 1236-1245.

Alifard, A., Ghanbarzadeh, A., Sohrabian, N., A theoretical approach to swarm computations by nano intelligent agents, (2012) International Review of Mechanical Engineering (IREME), 6 (4), pp. 940-946.

Bristot, V., Bristot, V., Schaeffer, L., Gruber, V., Alves, J., Maintenance based on conditions of machinery and equipment in the ceramic industry, (2012) International Review of Mechanical Engineering (IREME), 6 (3), pp. 379-383.

Refbacks

There are currently no refbacks.

Username
Password
Remember me