Email this article 
Determination of the Yield of Internal Combustion Thermal Engines
(*) Corresponding author
DOI's assignment:
the author of the article can submit here a request for assignment of a DOI number to this resource!
Cost of the service: euros 10,00 (for a DOI)
Abstract
This paper presents an algorithm for setting the dynamic parameters of the classic main mechanism of the internal combustion engines. It shows the distribution of the forces (on the main mechanism of the engine) to the internal combustion heat engines. With these strengths, and together with velocities of kinematic couplings is established then the heat engine efficiency. The method is applied separately for two distinct situations: when the engine is working on a compressor and into the motor system.
For the two separate cases, two independent formulas are obtained for the engine yield. With these relationships are then calculated about mechanical efficiency of Otto heat engine, four stroke, two-stroke and 4-stroke V. Final yield of the engine is obtained considering and thermal efficiency given by Carnot cycle
Copyright © 2014 Praise Worthy Prize - All rights reserved.
Keywords
References
Amoresano, A., Avagliano, V., Niola, V., Quaremba, G., The assessment of the in-cylinder pressure by means of the morpho-dynamical vibration analysis - Methodology and application, (2013) International Review of Mechanical Engineering (IREME), 7 (6), pp. 999-1006.
Anderson, R.B., The Fischer-Tropsch Synthesis, Academic Press, 1984.
Bishop J.L.H., An analytical approach to automobile valve gear design. Inst. of Mech. Engrs. Auto-Division Proc. 4, 1950-51, p. 150-160.
Choi J.K., Kim S.C., Hyundai Motor Co. Korea, An Experimental Study on the Frictional Characteristics in the Valve Train System. (945046), In FISITA CONGRESS, 17-21 October 1994, Beijing, p. 374-380.
De Falco, D., Di Massa, G., Pagano, S., Strano, S., Motorcycle handlebar dynamic response: Theoretical and experimental investigation, (2013) International Review of Mechanical Engineering (IREME), 7 (5), pp. 795-801.
De Falco, D., Di Massa, G., Pagano, S., A full scale motorcycle dynamic rig, (2013) International Review of Mechanical Engineering (IREME), 7 (3), pp. 519-526.
Ganapathi, P., Robinson, Y., Experimental investigation on the performance, emission and combustion characteristics of a diesel engine fuelled with polymer oil - Ethanol blends, (2013) International Review of Mechanical Engineering (IREME), 7 (5), pp. 919-924.
Heywood, J.B., Internal Combustion Engine Fundamentals, McGraw-Hill, 1988.
Hrones J.A., An analysis of Dynamic Forces in a Cam-Driver System, Trans. ASME, 1948, 70, p. 473-482.
Karikalan, L., Chandrasekaran, M., Sudhagar, K., Comparative studies on vegetable oil usage in C.I engines as an alternative to diesel fuel, (2013) International Review of Mechanical Engineering (IREME), 7 (4), pp. 705-715.
Leidel, J.A., An Optimized Low Heat Rejection Engine for Automotive Use, SAE paper No. 970068, 1997.
Mahalingam, S., Ramesh Bapu, B.R., Experimental and emission analysis of rubber seed oil and jatropha oil blends with diesel in compression ignition engine, (2013) International Review of Mechanical Engineering (IREME), 7 (5), pp. 955-959.
Naima, K., Liazid, A., Numerical investigation on combustion behaviors of direct-injection spark ignition engine fueled with CNG-Hydrogen blends, (2013) International Review of Mechanical Engineering (IREME), 7 (4), pp. 652-663.
Narasiman, V., Jeyakumar, S., Mani, M., Optimizing the compression ratio of C.I engine fuelled in sardine oil ethyl ester, (2013) International Review of Mechanical Engineering (IREME), 7 (3), pp. 463-467.
Petrescu, F.I., Petrescu, R.V. Determining the dynamic efficiency of cams. In the Ninth IFToMM International Symposium on Theory of Machines and Mechanisms, SYROM 2005, Bucharest, Romania, 2005, Vol. I, p. 129-134.
Petrescu, F.I., Petrescu, R.V., Popescu N., The efficiency of cams. In the Second International Conference “Mechanics and Machine Elements”, Technical University of Sofia, November 4-6, 2005, Sofia, Bulgaria, Vol. II, p. 237-243.
Petrescu, F.I., Petrescu, R.V., Cam Gears Dynamics in the Classic Distribution. In Independent Journal of Management & Production, ISSN: 2236-269X, Vol. 5, N. 1, January 2014, p. 166-185.
Petrescu, F.I.T., Petrescu, R.V.V., An algorithm for setting the dynamic parameters of the classic distribution mechanism, (2013) International Review on Modelling and Simulations (IREMOS), 6 (5), pp. 1637-1641.
Petrescu, F.I.T., Petrescu, R.V.V., Dynamic synthesis of the rotary cam and translated tappet with roll, (2013) International Review on Modelling and Simulations (IREMOS), 6 (2), pp. 600-607.
Petrescu, F.I., Petrescu, R.V., Dinamica mecanismelor de distributie, Create Space publisher, USA, December 2011, ISBN 978-1-4680-5265-7, 188 pages, Romanian version.
Petrescu, F.I., Bazele Analizei Si Optimizarii Sistemelor Cu Memorie Rigida, - Curs si Aplicatii, Create Space publisher, USA, 2012, ISBN 978-1-4700-2436-9, 164 pages, Romanian edition.
Petrescu, F.I., Teoria mecanismelor – Curs si aplicatii (editia a doua), Create Space publisher, USA, September 2012, ISBN 978-1-4792-9362-9, 284 pages, Romanian version.
Petrescu, F.I., Petrescu, R.V., Forces and efficiency of cams, (2013) International Review of Mechanical Engineering (IREME), 7 (3), pp. 507-511.
Petrescu, F.I., Petrescu, R.V., Cams with high efficiency, (2013) International Review of Mechanical Engineering (IREME), 7 (4), pp. 599-606.
Rahmani, L., Draoui, B., Bouanini, M., Benachour, E., CFD study on heat transfer to Bingham fluid during with gate impeller, (2013) International Review of Mechanical Engineering (IREME), 7 (6), pp. 1074-1079.
Ravi, S., Subramanian, R., Diesel fuel additives: An overview, (2013) International Review of Mechanical Engineering (IREME), 7 (4), pp. 698-704.
Ronney, P.D., Shoda, M., Waida, S.T., Durbin, E.J., Throttleless Premixed-Charge Engines: Concept and Experiment, in Journal of Automobile Engineering, Vol. 208, 1994, p. 13-24.
Sapate, K.D., Tikekar, A.N., Engine mapping for improvement in fuel efficiency of two stroke SI engine, (2013) International Review of Mechanical Engineering (IREME), 7 (3), pp. 392-394.
Sethusundaram, P.P., Arulshri, K.P., Mylsamy, K., Biodiesel blend, fuel properties and its emission characteristics Sterculia oil in diesel engine, (2013) International Review of Mechanical Engineering (IREME), 7 (5), pp. 925-929.
Zahari, I., Abas, M.A., Mat Arishad, N.I., Zainal Abidin, S.F., Muhamad Said, M.F., Experimental study to identify common engine part load conditions between Malaysian city driving and NEDC test, (2013) International Review of Mechanical Engineering (IREME), 7 (6), pp. 1152-1158.
Refbacks
- There are currently no refbacks.
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize
